[Users] Cannot find suitable CPU model for given data
Roy Golan
rgolan at redhat.com
Mon Dec 10 12:22:46 UTC 2012
On 12/10/2012 02:04 PM, Cristian Falcas wrote:
>
>
>
> On Mon, Dec 10, 2012 at 9:30 AM, Itamar Heim <iheim at redhat.com
> <mailto:iheim at redhat.com>> wrote:
>
> On 12/09/2012 11:22 PM, Cristian Falcas wrote:
>
>
>
>
> On Sun, Dec 9, 2012 at 5:37 PM, Roy Golan <rgolan at redhat.com
> <mailto:rgolan at redhat.com>
> <mailto:rgolan at redhat.com <mailto:rgolan at redhat.com>>> wrote:
>
> On 12/09/2012 05:17 PM, Cristian Falcas wrote:
>
> Hi,
>
> I get this error with the nightly builds when I start
> a VM:
>
>
> please paste the output of the following command to see if
> Opteron_G3 is really supported:
> vdsClient 0 -s getVdsCaps
>
>
> libvirtError: internal error Cannot find suitable CPU
> model for
> given data
>
>
> Log data:
> Thread-654::DEBUG::2012-12-09
> 17:14:18,120::libvirtvm::1485::vm.Vm::(_run)
> vmId=`a4a8f349-7fdf-42f4-873e-e70f692c6ca2`::<?xml
> version="1.0"
> encoding="utf-8"?>
> <domain type="kvm">
> <name>q</name>
> <uuid>a4a8f349-7fdf-42f4-873e-e70f692c6ca2</uuid>
> <memory>524288</memory>
> <currentMemory>524288</currentMemory>
> <vcpu>2</vcpu>
> <devices>
> <channel type="unix">
> <target
> name="com.redhat.rhevm.vdsm"
> type="virtio"/>
> <source mode="bind"
>
> path="/var/lib/libvirt/qemu/channels/q.com.redhat.rhevm.vdsm"/>
> </channel>
> <channel type="unix">
> <target
> name="org.qemu.guest_agent.0"
> type="virtio"/>
> <source mode="bind"
>
> path="/var/lib/libvirt/qemu/channels/q.org.qemu.guest_agent.0"/>
> </channel>
> <input bus="ps2" type="mouse"/>
> <channel type="spicevmc">
> <target name="com.redhat.spice.0"
> type="virtio"/>
> </channel>
> <graphics autoport="yes"
> keymap="en-us" listen="0"
> passwd="*****" passwdValidTo="1970-01-01T00:00:01"
> port="-1"
> tlsPort="-1" type="spice">
> <channel mode="secure"
> name="main"/>
> <channel mode="secure"
> name="inputs"/>
> <channel mode="secure"
> name="cursor"/>
> <channel mode="secure"
> name="playback"/>
> <channel mode="secure"
> name="record"/>
> <channel mode="secure"
> name="display"/>
> <channel mode="secure"
> name="usbredir"/>
> <channel mode="secure"
> name="smartcard"/>
> </graphics>
> <console type="pty">
> <target port="0" type="virtio"/>
> </console>
> <sound model="ac97"/>
> <video>
> <model heads="1" type="qxl"
> vram="65536"/>
> </video>
> <interface type="bridge">
> <mac address="00:1a:4a:6f:6f:f4"/>
> <model type="virtio"/>
> <source bridge="ovirtmgmt"/>
> <filterref
> filter="vdsm-no-mac-spoofing"/>
> </interface>
> <memballoon model="virtio"/>
> <disk device="cdrom" snapshot="no"
> type="file">
> <source
>
> file="/rhev/data-center/21ddcd50-aba8-461a-9ecf-c5762af89355/4f6a2b90-9c70-45e5-8b17-5274ee97ce73/images/11111111-1111-1111-1111-111111111111/CentOS-6.3-x86_64-bin-DVD1.iso"
> startupPolicy="optional"/>
> <target bus="ide" dev="hdc"/>
> <readonly/>
> <serial></serial>
> <boot order="1"/>
> </disk>
> <disk device="disk" snapshot="no"
> type="file">
> <source
>
> file="/rhev/data-center/21ddcd50-aba8-461a-9ecf-c5762af89355/81361e6d-2b58-4781-80c2-d908a0fe91cd/images/ffa8728f-6f0c-4b59-99ac-5bef0bd7634e/80a8701a-bf07-4d8a-8d02-8f98e6bb46a1"/>
> <target bus="virtio" dev="vda"/>
> <serial>ffa8728f-6f0c-4b59-99ac-5bef0bd7634e</serial>
> <driver cache="none"
> error_policy="stop"
> io="threads" name="qemu" type="raw"/>
> </disk>
> </devices>
> <os>
> <type arch="x86_64"
> machine="pc-0.14">hvm</type>
> <smbios mode="sysinfo"/>
> </os>
> <sysinfo type="smbios">
> <system>
> <entry
> name="manufacturer">oVirt</entry>
> <entry name="product">oVirt
> Node</entry>
> <entry name="version">17-1</entry>
> <entry
> name="serial">30303146-4430-3946-3139-3938FFFFFFFF</entry>
> <entry
> name="uuid">a4a8f349-7fdf-42f4-873e-e70f692c6ca2</entry>
> </system>
> </sysinfo>
> <clock adjustment="-43200" offset="variable">
> <timer name="rtc" tickpolicy="catchup"/>
> </clock>
> <features>
> <acpi/>
> </features>
> <cpu match="exact">
> <model>Opteron_G3</model>
> <topology cores="1" sockets="2"
> threads="1"/>
> </cpu>
> </domain>
>
> Thread-654::DEBUG::2012-12-09
> 17:14:18,152::vm::672::vm.Vm::(_startUnderlyingVm)
>
> vmId=`a4a8f349-7fdf-42f4-873e-e70f692c6ca2`::_ongoingCreations
> released
> Thread-654::ERROR::2012-12-09
> 17:14:18,152::vm::696::vm.Vm::(_startUnderlyingVm)
> vmId=`a4a8f349-7fdf-42f4-873e-e70f692c6ca2`::The vm
> start process
> failed
> Traceback (most recent call last):
> File "/usr/share/vdsm/vm.py", line 658, in
> _startUnderlyingVm
> self._run()
> File "/usr/share/vdsm/libvirtvm.py", line 1511, in _run
> self._connection.createXML(domxml, flags),
> File
>
> "/usr/lib64/python2.7/site-packages/vdsm/libvirtconnection.py",
> line 111, in wrapper
> ret = f(*args, **kwargs)
> File
> "/usr/lib64/python2.7/site-packages/libvirt.py", line 2633,
> in createXML
> if ret is None:raise
> libvirtError('virDomainCreateXML()
> failed', conn=self)
> libvirtError: internal error Cannot find suitable CPU
> model for
> given data
> Thread-654::DEBUG::2012-12-09
> 17:14:18,156::vm::1045::vm.Vm::(setDownStatus)
> vmId=`a4a8f349-7fdf-42f4-873e-e70f692c6ca2`::Changed
> state to
> Down: internal error Cannot find suitable CPU model
> for given data
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org <mailto:Users at ovirt.org>
> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org <mailto:Users at ovirt.org>
> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
> The command
> vdsClient 0 -s getVdsCaps
> didn't work
>
> Is this the same thing?
>
> [root at localhost cristi]# vdsClient -s localhost getVdsCaps
> HBAInventory = {'iSCSI': [{'InitiatorName':
> 'iqn.1994-05.com.redhat:74bc7d9e76f3'}], 'FC': []}
> ISCSIInitiatorName = iqn.1994-05.com.redhat:74bc7d9e76f3
> bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu':
> '1500',
> 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'},
> 'bond0':
> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '',
> 'slaves': [],
> 'hwaddr': '00:00:00:00:00:00'}}
> bridges = {'ovirtmgmt': {'addr': '10.20.20.20',
> 'cfg': {'VLAN':
> 'yes', 'IPV6INIT': 'no', 'IPADDR0': '10.20.20.20', 'DNS1':
> '8.8.8.8',
> 'PREFIX0': '24', 'DEFROUTE': 'yes', 'IPV4_FAILURE_FATAL':
> 'no', 'DELAY':
> '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', 'GATEWAY0':
> '10.20.20.1', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge',
> 'ONBOOT': 'yes',
> 'UUID': 'd0d0c1c1-6625-4be3-ab1e-d879c870d577'}, 'mtu': '1500',
> 'netmask': '255.255.255.0', 'stp': 'off', 'ports': ['p10p1']}}
> clusterLevels = ['3.0', '3.1', '3.2']
> cpuCores = 4
> cpuFlags =
> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,hw_pstate,npt,lbrv,svm_lock,nrip_save,model_athlon,model_Opteron_G3,model_Opteron_G1,model_phenom,model_Opteron_G2
> cpuModel = AMD Phenom(tm) II X4 965 Processor
> cpuSockets = 1
> cpuSpeed = 3400.000
> emulatedMachines = ['pc-1.3', 'none', 'pc', 'pc-1.2',
> 'pc-1.1',
> 'pc-1.0', 'pc-0.15', 'pc-0.14', 'pc-0.13', 'pc-0.12', 'pc-0.11',
> 'pc-0.10', 'isapc', 'q35', 'q35-next', 'pc-1.3', 'none', 'pc',
> 'pc-1.2',
> 'pc-1.1', 'pc-1.0', 'pc-0.15', 'pc-0.14', 'pc-0.13', 'pc-0.12',
> 'pc-0.11', 'pc-0.10', 'isapc', 'q35', 'q35-next']
> guestOverhead = 65
> hooks = {'before_vm_start': {'50_floppy': {'md5':
> '882a5b1a0d303102765d07c7ff6ae0fc'}, '50_hostusb': {'md5':
> '06110c7365ff3b71d40bfc9bad2adc05'}, '50_isolatedprivatevlan':
> {'md5':
> 'acc557aadb52442bd43bfa2f7a2b42a1'}}, 'before_vm_migrate_source':
> {'50_floppy': {'md5': '388f180317bd8a121a512a8b26af6bf5'},
> '50_hostusb':
> {'md5': 'e50a0975acd8bafd0052b65a787c2fdd'}}, 'after_vm_destroy':
> {'50_hostusb': {'md5': 'cbf5ef4aed1e3cbe3ef9e30694ea6607'}}}
> kvmEnabled = true
> lastClient = 0.0.0.0
> lastClientIface = ppp0
> management_ip =
> memSize = 5968
> netConfigDirty = False
> networks = {'ovirtmgmt': {'iface': 'ovirtmgmt', 'addr':
> '10.20.20.20', 'cfg': {'VLAN': 'yes', 'IPV6INIT': 'no', 'IPADDR0':
> '10.20.20.20', 'DNS1': '8.8.8.8', 'PREFIX0': '24', 'DEFROUTE':
> 'yes',
> 'IPV4_FAILURE_FATAL': 'no', 'DELAY': '0', 'NM_CONTROLLED': 'no',
> 'BOOTPROTO': 'none', 'GATEWAY0': '10.20.20.1', 'DEVICE':
> 'ovirtmgmt',
> 'TYPE': 'Bridge', 'ONBOOT': 'yes', 'UUID':
> 'd0d0c1c1-6625-4be3-ab1e-d879c870d577'}, 'mtu': '1500', 'netmask':
> '255.255.255.0', 'stp': 'off', 'bridged': True, 'gateway':
> '0.0.0.0',
> 'ports': ['p10p1']}}
> nics = {'p10p1': {'addr': '', 'cfg': {'BRIDGE':
> 'ovirtmgmt',
> 'DEVICE': 'p10p1', 'IPV6INIT': 'no', 'IPADDR0': '10.20.20.20',
> 'DNS1':
> '8.8.8.8', 'PREFIX0': '24', 'DEFROUTE': 'yes',
> 'IPV4_FAILURE_FATAL':
> 'no', 'NM_CONTROLLED': 'no', 'GATEWAY0': '10.20.20.1', 'HWADDR':
> '00:1f:d0:9f:19:98', 'ONBOOT': 'yes', 'UUID':
> 'd0d0c1c1-6625-4be3-ab1e-d879c870d577'}, 'mtu': '1500',
> 'netmask': '',
> 'hwaddr': '00:1f:d0:9f:19:98', 'speed': 100}}
> operatingSystem = {'release': '1', 'version': '17',
> 'name':
> 'Fedora'}
> packages2 = {'kernel': {'release': '2.fc17.x86_64',
> 'buildtime': 1354620364.0, 'version': '3.6.9'}, 'spice-server':
> {'release': '1.fc17', 'buildtime': 1348891802, 'version':
> '0.12.0'},
> 'vdsm': {'release': '0.89.git922366a.fc17', 'buildtime':
> 1354997600,
> 'version': '4.10.2'}, 'qemu-kvm': {'release': '1.fc17',
> 'buildtime':
> 1355029612, 'version': '1.3.0'}, 'libvirt': {'release': '1.fc17',
> 'buildtime': 1352437629, 'version': '1.0.0'}, 'qemu-img':
> {'release':
> '1.fc17', 'buildtime': 1355029612, 'version': '1.3.0'}, 'mom':
> {'release': '1.fc17', 'buildtime': 1354651873, 'version':
> '0.3.0'}}
> reservedMem = 321
> software_revision = 0.89
> software_version = 4.10
> supportedENGINEs = ['3.0', '3.1']
> supportedProtocols = ['2.2', '2.3']
> uuid = 30303146-4430-3946-3139-3938FFFFFFFF
> version_name = Snow Man
> vlans = {}
> vmTypes = ['kvm']
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org <mailto:Users at ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
>
>
> according to vdsClient -s 0 GetVdsCaps vdsm does report opteron
> G3.nx flag must be enabled (and it seems it does).
> vdsm/ovirt doesn't check for aes flag.
> waiting to hear if libvirt downgrade helped
>
>
>
> It's the same problem with libvirt-0.10.2 also.
>
>
> I checked the flags from /proc/cpuinfo and the ones from vdsClient -s
> 0 getVdsCaps.
>
> The only difference is that vdsClient has those extra flags:
> model_Opteron_G1
> model_Opteron_G2
> model_Opteron_G3
> model_athlon
> model_phenom
>
> I don't know if they should appear in the cpuFlags section. From other
> outputs on the internet, there was no model_*.
the output valid- a model_Opteron_G3 is saying your server can emulate
G3. need the libvirt.log for more info and also worth checking the link
ovedo previously pasted
>
>
> Best regards,
> Cristian Falcas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20121210/69c4090b/attachment-0001.html>
More information about the Users
mailing list