[Users] web gui and bonded nic changes

[Jim Kinney]

I hit a snag last night. I needed to remove a nic from a host bond in
ovirtmanage to create a new bridge line for user access to VMs. The process
hung the box and I had to go put hands on the physical console (more reason
to get the ipmi network setup!). The error message was "can't add eth3 to
bond. already bonded" (or close). It seems the only way to remove a nic
from a bond is to unload the bonding module. Apparently the ovirt process
doesn't call a modprobe -r bonding during a network reset on the managed
hosts. stop network, unload bonding, start network worked fine from the
console.

-- 
-- 
James P. Kinney III
*
*Every time you stop a school, you will have to build a jail. What you gain
at one end you lose at the other. It's like feeding a dog on his own tail.
It won't fatten the dog.
- Speech 11/23/1900 Mark Twain
*
http://electjimkinney.org
http://heretothereideas.blogspot.com/
*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20121213/e78fb68f/attachment-0001.html>