[Users] Unable to login into console Spice VNC anyone?
Itamar Heim
iheim at redhat.com
Wed Jul 25 18:09:55 UTC 2012
would it be relevant for you to try the 3.1 beta?
it has this which should cover your 'all in one' needs:
http://www.ovirt.org/wiki/Feature/AllInOne
On 07/25/2012 06:52 PM, Brent Bolin wrote:
> Thanks David for your reply -
>
> I have completely flushed all iptables rules 'iptables --flush" -
>
> iptables -L -v -n
> Chain INPUT (policy ACCEPT 1775K packets, 627M bytes)
> pkts bytes target prot opt in out source
> destination
>
> Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
> pkts bytes target prot opt in out source
> destination
>
> Chain OUTPUT (policy ACCEPT 1754K packets, 589M bytes)
> pkts bytes target prot opt in out source
> destination
>
>
> The base host is Fedora 16 running with desktop
>
> First installed vdsm and then ovirt-engine
>
> Single network bridge installed, but there is another 1GB nic that isn't
> being used -
>
> eth0 Link encap:Ethernet HWaddr 00:1B:21:7D:ED:4A
> inet6 addr: fe80::21b:21ff:fe7d:ed4a/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:99656 errors:0 dropped:0 overruns:0 frame:0
> TX packets:51508 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:63007897 (60.0 MiB) TX bytes:18148736 (17.3 MiB)
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> inet6 addr: ::1/128 Scope:Host
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:1814674 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1814674 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:646274067 (616.3 MiB) TX bytes:646274067 (616.3 MiB)
>
> ovirtmgmt Link encap:Ethernet HWaddr 00:1B:21:7D:ED:4A
> inet addr:192.168.0.118 Bcast:192.168.0.255 Mask:255.255.255.0
> inet6 addr: fe80::21b:21ff:fe7d:ed4a/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:70706 errors:0 dropped:0 overruns:0 frame:0
> TX packets:48717 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:52195637 (49.7 MiB) TX bytes:14942359 (14.2 MiB)
>
> vnet0 Link encap:Ethernet HWaddr FE:1A:4A:A8:00:00
> inet6 addr: fe80::fc1a:4aff:fea8:0/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
> TX packets:14 errors:0 dropped:0 overruns:1 carrier:0
> collisions:0 txqueuelen:500
> RX bytes:1299 (1.2 KiB) TX bytes:2760 (2.6 KiB)
>
> After ovirt engine is installed logged into the interface and configured
> the host using 127.0.0.1 . Host reboots. Host shows up in the admin
> interface only complaining about power management that isn't configured.
>
>
> Here
> <https://picasaweb.google.com/lh/photo/3vclaT_6d3uy2QODU6xp_zyLvDWH8k_pPWnP_LVb4fM?feat=directlink>
> is a screen shot of the web interface
>
> The only configuration settings I've changed are in the qemu.conf to
> either tls=0 or tls=1
>
> spice-gtk-0.11-4.fc16.x86_64
> spice-client-0.10.1-1.fc16.x86_64
> spice-glib-0.11-4.fc16.x86_64
> spice-gtk3-0.11-4.fc16.x86_64
> spice-xpi-2.7-3.fc16.x86_64
> spice-gtk-tools-0.11-4.fc16.x86_64
> spice-server-0.10.1-1.fc16.x86_64
>
> The link in the admin interface shows available(using FF). When I click
> it opens a spicec:0 dialog and just closes
>
> If I try to open from a shell I get things like this -
>
> Brief window open and then error -
>
> spicec -h 127.0.0.1 -p 5900
> Warning: connect error 5 - need secured connection
>
>
>
>
>
>
>
> On Wed, Jul 25, 2012 at 10:04 AM, David Jaša <djasa at redhat.com
> <mailto:djasa at redhat.com>> wrote:
> > Hi Brent,
> >
> > first guess: have a look if your iptables setup allow connection to the
> > qemu processes. RHEV 3.0 documentation (publicly accesible) says that a
> > host needs these ports open:
> > port 22 for SSH,
> > ports 5634 to 6166 for guest console connections,
> > port 16514 for libvirt virtual machine migration traffic,
> > ports 49152 to 49216 for VDSM virtual machine migration traffic,
> > and
> > port 54321 for the Red Hat Enterprise Virtualization Manager.
> >
> > If you have ovirt-engine running onu the same machine as vdsm, most of
> > the ports don't need to be accessible from outside but "guest console"
> > ports do.
> >
> > If it isn't iptables, please share at least:
> > * what your actual topology is (engine on the physical host?)
> > * if you use some custom tls settings such as tls switched off
> > * what spice client & xpi versions are you using
> > * how exactly the client failed (showed error window? with what error?
> > just didn't launch?)
> >
> > In your email, you didn't write any debugging hints apart from the setup
> > being single-host one...
> >
> > David
> >
> >
> > Brent Bolin píše v St 25. 07. 2012 v 09:00 -0500:
> >> About 6 months ago I asked on this list if it was possible to install
> >> ovirt on a single host. Thread got long and winded and lost interest.
> >>
> >> Started looking at the project again about two days ago. What I
> >> really didn't understand was using a base Fedora install. Installing
> >> vdsm and then installing ovirt engine.
> >>
> >> So everything is up. Created data center, storage, cluster, host and
> >> virtual machine.
> >>
> >> But I can't get there from here. I can't get console running to
> >> configure the booted install.
> >>
> >> I've tried VNC, Spice, Firefox with spice-xpi plugin.
> >>
> >> Tried tweaking, turning, touching, swearing @ /etc/libvirt/qemu.conf
> >> settings. tls settings. Not even sure if this is the right place to
> >> be checking.
> >>
> >> This is a show stopper.
> >>
> >> LSB Version: :core-4.0-amd64:core-4.0-noarch
> >> Distributor ID: Fedora
> >> Description: Fedora release 16 (Verne)
> >> Release: 16
> >> Codename: Verne
> >>
> >> [root at ovirt # rpm -qa|grep ovirt-engine
> >> ovirt-engine-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-iso-uploader-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-backend-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-notification-service-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-jboss-deps-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-tools-common-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-dbscripts-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-setup-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-jbossas-1.2-2.fc16.x86_64
> >> ovirt-engine-userportal-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-restapi-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-genericapi-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-config-3.0.0_0001-1.6.fc16.x86_64
> >> ovirt-engine-webadmin-portal-3.0.0_0001-1.6.fc16.x86_64
> >>
> >> Any input would be appreciated
> >> _______________________________________________
> >> Users mailing list
> >> Users at ovirt.org <mailto:Users at ovirt.org>
> >> http://lists.ovirt.org/mailman/listinfo/users
> >
> > --
> >
> > David Jaša, RHCE
> >
> > SPICE QE based in Brno
> > GPG Key: 22C33E24
> > Fingerprint: 513A 060B D1B4 2A72 7F0D 0278 B125 CD00 22C3 3E24
> >
> >
> >
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
More information about the Users
mailing list