[Users] Unable to login into console Spice VNC anyone?
Brent Bolin
brent.bolin at gmail.com
Wed Jul 25 18:46:40 UTC 2012
I have seen this. Can give it a try.
At this point I'm not sure if it's a problem with my configuration.
Or making console connections with either vnc or spice. The ports are
clearly running -
netstat -an|grep 590
tcp 0 0 0.0.0.0:5900 0.0.0.0:*
LISTEN
tcp 0 0 0.0.0.0:5901 0.0.0.0:*
LISTEN
When using plain old kvm, virt-manager I could just simply connect
using any vnc or virt-viewer or x11 virtmanager.
I'm not sure what ovirt is doing with tls etc...
Not being able to get console access is a definite show stopper. And
it shouldn't be rocket science to do it. And it should be accessible
from either linux or windows clients. Does vSphere (windows only)
ring a bell?
On Wed, Jul 25, 2012 at 1:09 PM, Itamar Heim <iheim at redhat.com> wrote:
>
> would it be relevant for you to try the 3.1 beta?
> it has this which should cover your 'all in one' needs:
> http://www.ovirt.org/wiki/Feature/AllInOne
>
>
>
> On 07/25/2012 06:52 PM, Brent Bolin wrote:
>>
>> Thanks David for your reply -
>>
>> I have completely flushed all iptables rules 'iptables --flush" -
>>
>> iptables -L -v -n
>> Chain INPUT (policy ACCEPT 1775K packets, 627M bytes)
>> pkts bytes target prot opt in out source
>> destination
>>
>> Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
>> pkts bytes target prot opt in out source
>> destination
>>
>> Chain OUTPUT (policy ACCEPT 1754K packets, 589M bytes)
>> pkts bytes target prot opt in out source
>> destination
>>
>>
>> The base host is Fedora 16 running with desktop
>>
>> First installed vdsm and then ovirt-engine
>>
>> Single network bridge installed, but there is another 1GB nic that isn't
>> being used -
>>
>> eth0 Link encap:Ethernet HWaddr 00:1B:21:7D:ED:4A
>> inet6 addr: fe80::21b:21ff:fe7d:ed4a/64 Scope:Link
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>> RX packets:99656 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:51508 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:1000
>> RX bytes:63007897 (60.0 MiB) TX bytes:18148736 (17.3 MiB)
>>
>> lo Link encap:Local Loopback
>> inet addr:127.0.0.1 Mask:255.0.0.0
>> inet6 addr: ::1/128 Scope:Host
>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>> RX packets:1814674 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:1814674 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:0
>> RX bytes:646274067 (616.3 MiB) TX bytes:646274067 (616.3 MiB)
>>
>> ovirtmgmt Link encap:Ethernet HWaddr 00:1B:21:7D:ED:4A
>> inet addr:192.168.0.118 Bcast:192.168.0.255 Mask:255.255.255.0
>> inet6 addr: fe80::21b:21ff:fe7d:ed4a/64 Scope:Link
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>> RX packets:70706 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:48717 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:0
>> RX bytes:52195637 (49.7 MiB) TX bytes:14942359 (14.2 MiB)
>>
>> vnet0 Link encap:Ethernet HWaddr FE:1A:4A:A8:00:00
>> inet6 addr: fe80::fc1a:4aff:fea8:0/64 Scope:Link
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:14 errors:0 dropped:0 overruns:1 carrier:0
>> collisions:0 txqueuelen:500
>> RX bytes:1299 (1.2 KiB) TX bytes:2760 (2.6 KiB)
>>
>> After ovirt engine is installed logged into the interface and configured
>> the host using 127.0.0.1 . Host reboots. Host shows up in the admin
>> interface only complaining about power management that isn't configured.
>>
>>
>> Here
>> <https://picasaweb.google.com/lh/photo/3vclaT_6d3uy2QODU6xp_zyLvDWH8k_pPWnP_LVb4fM?feat=directlink>
>>
>> is a screen shot of the web interface
>>
>> The only configuration settings I've changed are in the qemu.conf to
>> either tls=0 or tls=1
>>
>> spice-gtk-0.11-4.fc16.x86_64
>> spice-client-0.10.1-1.fc16.x86_64
>> spice-glib-0.11-4.fc16.x86_64
>> spice-gtk3-0.11-4.fc16.x86_64
>> spice-xpi-2.7-3.fc16.x86_64
>> spice-gtk-tools-0.11-4.fc16.x86_64
>> spice-server-0.10.1-1.fc16.x86_64
>>
>> The link in the admin interface shows available(using FF). When I click
>> it opens a spicec:0 dialog and just closes
>>
>> If I try to open from a shell I get things like this -
>>
>> Brief window open and then error -
>>
>> spicec -h 127.0.0.1 -p 5900
>> Warning: connect error 5 - need secured connection
>>
>>
>>
>>
>>
>>
>>
>> On Wed, Jul 25, 2012 at 10:04 AM, David Jaša <djasa at redhat.com
>> <mailto:djasa at redhat.com>> wrote:
>> > Hi Brent,
>> >
>> > first guess: have a look if your iptables setup allow connection to the
>> > qemu processes. RHEV 3.0 documentation (publicly accesible) says that a
>> > host needs these ports open:
>> > port 22 for SSH,
>> > ports 5634 to 6166 for guest console connections,
>> > port 16514 for libvirt virtual machine migration traffic,
>> > ports 49152 to 49216 for VDSM virtual machine migration traffic,
>> > and
>> > port 54321 for the Red Hat Enterprise Virtualization Manager.
>> >
>> > If you have ovirt-engine running onu the same machine as vdsm, most of
>> > the ports don't need to be accessible from outside but "guest console"
>> > ports do.
>> >
>> > If it isn't iptables, please share at least:
>> > * what your actual topology is (engine on the physical host?)
>> > * if you use some custom tls settings such as tls switched off
>> > * what spice client & xpi versions are you using
>> > * how exactly the client failed (showed error window? with what error?
>> > just didn't launch?)
>> >
>> > In your email, you didn't write any debugging hints apart from the setup
>> > being single-host one...
>> >
>> > David
>> >
>> >
>> > Brent Bolin píše v St 25. 07. 2012 v 09:00 -0500:
>> >> About 6 months ago I asked on this list if it was possible to install
>> >> ovirt on a single host. Thread got long and winded and lost interest.
>> >>
>> >> Started looking at the project again about two days ago. What I
>> >> really didn't understand was using a base Fedora install. Installing
>> >> vdsm and then installing ovirt engine.
>> >>
>> >> So everything is up. Created data center, storage, cluster, host and
>> >> virtual machine.
>> >>
>> >> But I can't get there from here. I can't get console running to
>> >> configure the booted install.
>> >>
>> >> I've tried VNC, Spice, Firefox with spice-xpi plugin.
>> >>
>> >> Tried tweaking, turning, touching, swearing @ /etc/libvirt/qemu.conf
>> >> settings. tls settings. Not even sure if this is the right place to
>> >> be checking.
>> >>
>> >> This is a show stopper.
>> >>
>> >> LSB Version: :core-4.0-amd64:core-4.0-noarch
>> >> Distributor ID: Fedora
>> >> Description: Fedora release 16 (Verne)
>> >> Release: 16
>> >> Codename: Verne
>> >>
>> >> [root at ovirt # rpm -qa|grep ovirt-engine
>> >> ovirt-engine-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-iso-uploader-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-backend-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-notification-service-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-jboss-deps-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-tools-common-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-dbscripts-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-setup-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-jbossas-1.2-2.fc16.x86_64
>> >> ovirt-engine-userportal-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-restapi-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-genericapi-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-config-3.0.0_0001-1.6.fc16.x86_64
>> >> ovirt-engine-webadmin-portal-3.0.0_0001-1.6.fc16.x86_64
>> >>
>> >> Any input would be appreciated
>> >> _______________________________________________
>> >> Users mailing list
>> >> Users at ovirt.org <mailto:Users at ovirt.org>
>>
>> >> http://lists.ovirt.org/mailman/listinfo/users
>> >
>> > --
>> >
>> > David Jaša, RHCE
>> >
>> > SPICE QE based in Brno
>> > GPG Key: 22C33E24
>> > Fingerprint: 513A 060B D1B4 2A72 7F0D 0278 B125 CD00 22C3 3E24
>> >
>> >
>> >
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
More information about the Users
mailing list