[Users] Unable to login into console Spice VNC anyone?
Itamar Heim
iheim at redhat.com
Wed Jul 25 20:30:49 UTC 2012
On 07/25/2012 09:46 PM, Brent Bolin wrote:
> I have seen this. Can give it a try.
>
> At this point I'm not sure if it's a problem with my configuration.
> Or making console connections with either vnc or spice. The ports are
> clearly running -
>
> netstat -an|grep 590
> tcp 0 0 0.0.0.0:5900 0.0.0.0:*
> LISTEN
> tcp 0 0 0.0.0.0:5901 0.0.0.0:*
> LISTEN
>
>
> When using plain old kvm, virt-manager I could just simply connect
> using any vnc or virt-viewer or x11 virtmanager.
>
> I'm not sure what ovirt is doing with tls etc...
>
> Not being able to get console access is a definite show stopper. And
> it shouldn't be rocket science to do it. And it should be accessible
> from either linux or windows clients. Does vSphere (windows only)
> ring a bell?
>
>
yes, it should just work once you install spice on your client and open
it from the user portal or webadmin (you can't connect directly unless
you disable the ticketing system).
(you can connect from CLI using the ovirt cli for example, since it
takes care of setting the ticket for you to connect.
ticket == temporary password for the vnc/spice session.
>
>
>
> On Wed, Jul 25, 2012 at 1:09 PM, Itamar Heim <iheim at redhat.com> wrote:
>>
>> would it be relevant for you to try the 3.1 beta?
>> it has this which should cover your 'all in one' needs:
>> http://www.ovirt.org/wiki/Feature/AllInOne
>>
>>
>>
>> On 07/25/2012 06:52 PM, Brent Bolin wrote:
>>>
>>> Thanks David for your reply -
>>>
>>> I have completely flushed all iptables rules 'iptables --flush" -
>>>
>>> iptables -L -v -n
>>> Chain INPUT (policy ACCEPT 1775K packets, 627M bytes)
>>> pkts bytes target prot opt in out source
>>> destination
>>>
>>> Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
>>> pkts bytes target prot opt in out source
>>> destination
>>>
>>> Chain OUTPUT (policy ACCEPT 1754K packets, 589M bytes)
>>> pkts bytes target prot opt in out source
>>> destination
>>>
>>>
>>> The base host is Fedora 16 running with desktop
>>>
>>> First installed vdsm and then ovirt-engine
>>>
>>> Single network bridge installed, but there is another 1GB nic that isn't
>>> being used -
>>>
>>> eth0 Link encap:Ethernet HWaddr 00:1B:21:7D:ED:4A
>>> inet6 addr: fe80::21b:21ff:fe7d:ed4a/64 Scope:Link
>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>> RX packets:99656 errors:0 dropped:0 overruns:0 frame:0
>>> TX packets:51508 errors:0 dropped:0 overruns:0 carrier:0
>>> collisions:0 txqueuelen:1000
>>> RX bytes:63007897 (60.0 MiB) TX bytes:18148736 (17.3 MiB)
>>>
>>> lo Link encap:Local Loopback
>>> inet addr:127.0.0.1 Mask:255.0.0.0
>>> inet6 addr: ::1/128 Scope:Host
>>> UP LOOPBACK RUNNING MTU:16436 Metric:1
>>> RX packets:1814674 errors:0 dropped:0 overruns:0 frame:0
>>> TX packets:1814674 errors:0 dropped:0 overruns:0 carrier:0
>>> collisions:0 txqueuelen:0
>>> RX bytes:646274067 (616.3 MiB) TX bytes:646274067 (616.3 MiB)
>>>
>>> ovirtmgmt Link encap:Ethernet HWaddr 00:1B:21:7D:ED:4A
>>> inet addr:192.168.0.118 Bcast:192.168.0.255 Mask:255.255.255.0
>>> inet6 addr: fe80::21b:21ff:fe7d:ed4a/64 Scope:Link
>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>> RX packets:70706 errors:0 dropped:0 overruns:0 frame:0
>>> TX packets:48717 errors:0 dropped:0 overruns:0 carrier:0
>>> collisions:0 txqueuelen:0
>>> RX bytes:52195637 (49.7 MiB) TX bytes:14942359 (14.2 MiB)
>>>
>>> vnet0 Link encap:Ethernet HWaddr FE:1A:4A:A8:00:00
>>> inet6 addr: fe80::fc1a:4aff:fea8:0/64 Scope:Link
>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
>>> TX packets:14 errors:0 dropped:0 overruns:1 carrier:0
>>> collisions:0 txqueuelen:500
>>> RX bytes:1299 (1.2 KiB) TX bytes:2760 (2.6 KiB)
>>>
>>> After ovirt engine is installed logged into the interface and configured
>>> the host using 127.0.0.1 . Host reboots. Host shows up in the admin
>>> interface only complaining about power management that isn't configured.
>>>
>>>
>>> Here
>>> <https://picasaweb.google.com/lh/photo/3vclaT_6d3uy2QODU6xp_zyLvDWH8k_pPWnP_LVb4fM?feat=directlink>
>>>
>>> is a screen shot of the web interface
>>>
>>> The only configuration settings I've changed are in the qemu.conf to
>>> either tls=0 or tls=1
>>>
>>> spice-gtk-0.11-4.fc16.x86_64
>>> spice-client-0.10.1-1.fc16.x86_64
>>> spice-glib-0.11-4.fc16.x86_64
>>> spice-gtk3-0.11-4.fc16.x86_64
>>> spice-xpi-2.7-3.fc16.x86_64
>>> spice-gtk-tools-0.11-4.fc16.x86_64
>>> spice-server-0.10.1-1.fc16.x86_64
>>>
>>> The link in the admin interface shows available(using FF). When I click
>>> it opens a spicec:0 dialog and just closes
>>>
>>> If I try to open from a shell I get things like this -
>>>
>>> Brief window open and then error -
>>>
>>> spicec -h 127.0.0.1 -p 5900
>>> Warning: connect error 5 - need secured connection
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Wed, Jul 25, 2012 at 10:04 AM, David Jaša <djasa at redhat.com
>>> <mailto:djasa at redhat.com>> wrote:
>>> > Hi Brent,
>>> >
>>> > first guess: have a look if your iptables setup allow connection to the
>>> > qemu processes. RHEV 3.0 documentation (publicly accesible) says that a
>>> > host needs these ports open:
>>> > port 22 for SSH,
>>> > ports 5634 to 6166 for guest console connections,
>>> > port 16514 for libvirt virtual machine migration traffic,
>>> > ports 49152 to 49216 for VDSM virtual machine migration traffic,
>>> > and
>>> > port 54321 for the Red Hat Enterprise Virtualization Manager.
>>> >
>>> > If you have ovirt-engine running onu the same machine as vdsm, most of
>>> > the ports don't need to be accessible from outside but "guest console"
>>> > ports do.
>>> >
>>> > If it isn't iptables, please share at least:
>>> > * what your actual topology is (engine on the physical host?)
>>> > * if you use some custom tls settings such as tls switched off
>>> > * what spice client & xpi versions are you using
>>> > * how exactly the client failed (showed error window? with what error?
>>> > just didn't launch?)
>>> >
>>> > In your email, you didn't write any debugging hints apart from the setup
>>> > being single-host one...
>>> >
>>> > David
>>> >
>>> >
>>> > Brent Bolin píše v St 25. 07. 2012 v 09:00 -0500:
>>> >> About 6 months ago I asked on this list if it was possible to install
>>> >> ovirt on a single host. Thread got long and winded and lost interest.
>>> >>
>>> >> Started looking at the project again about two days ago. What I
>>> >> really didn't understand was using a base Fedora install. Installing
>>> >> vdsm and then installing ovirt engine.
>>> >>
>>> >> So everything is up. Created data center, storage, cluster, host and
>>> >> virtual machine.
>>> >>
>>> >> But I can't get there from here. I can't get console running to
>>> >> configure the booted install.
>>> >>
>>> >> I've tried VNC, Spice, Firefox with spice-xpi plugin.
>>> >>
>>> >> Tried tweaking, turning, touching, swearing @ /etc/libvirt/qemu.conf
>>> >> settings. tls settings. Not even sure if this is the right place to
>>> >> be checking.
>>> >>
>>> >> This is a show stopper.
>>> >>
>>> >> LSB Version: :core-4.0-amd64:core-4.0-noarch
>>> >> Distributor ID: Fedora
>>> >> Description: Fedora release 16 (Verne)
>>> >> Release: 16
>>> >> Codename: Verne
>>> >>
>>> >> [root at ovirt # rpm -qa|grep ovirt-engine
>>> >> ovirt-engine-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-iso-uploader-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-backend-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-notification-service-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-jboss-deps-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-tools-common-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-dbscripts-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-setup-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-jbossas-1.2-2.fc16.x86_64
>>> >> ovirt-engine-userportal-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-restapi-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-genericapi-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-config-3.0.0_0001-1.6.fc16.x86_64
>>> >> ovirt-engine-webadmin-portal-3.0.0_0001-1.6.fc16.x86_64
>>> >>
>>> >> Any input would be appreciated
>>> >> _______________________________________________
>>> >> Users mailing list
>>> >> Users at ovirt.org <mailto:Users at ovirt.org>
>>>
>>> >> http://lists.ovirt.org/mailman/listinfo/users
>>> >
>>> > --
>>> >
>>> > David Jaša, RHCE
>>> >
>>> > SPICE QE based in Brno
>>> > GPG Key: 22C33E24
>>> > Fingerprint: 513A 060B D1B4 2A72 7F0D 0278 B125 CD00 22C3 3E24
>>> >
>>> >
>>> >
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>
>>
More information about the Users
mailing list