[Users] Adding Host

[Doron Fediuck]

Rene,
Standard bootstrap assumes base OS is installed, with access to relevant yum repo
in order to fetch vdsm and dependent RPM's. From this point of view, we concentrate
on VDSM, while kvm is simply a kernel module which should be loaded. Anything beyond
will probably cause manual intervention as you just had.


On 27/03/12 12:32, Rene Rosenberger wrote:
> Hi,
> 
> I think I will give it a new try from the scratch. What is the procedure to add a centos 6.2 host where is already kvm running with vms? Lets forget the vms for a while and think only about that kvm is already installed on the host I want to add to ovirt.
> 
> Regards,
> rene
> 
> -----Ursprüngliche Nachricht-----
> Von: Doron Fediuck [mailto:dfediuck at redhat.com] 
> Gesendet: Dienstag, 27. März 2012 12:09
> An: Rene Rosenberger
> Cc: Haim Ateya; users at ovirt.org
> Betreff: Re: [Users] Adding Host
> 
> Rene,
> Having an ovirtmgmt bridge manually setup, causes the bootstrap process to avoid over-running it, assuming it's working.
> 
> In normal flow it should be auto-generated for you, unless something goes wrong. So you should have it working, but if you find the earlier issue, please let us know so we could try and fix it.
> 
> Doron
> 
> On 27/03/12 12:01, Rene Rosenberger wrote:
>> Hi,
>>
>>  
>>
>> i think i got it. When i create a bridge manualy like this:
>>
>>  
>>
>> Add ovirt management bridge manually. Here the examples of ifcfg 
>> files, resides in /etc/sysconfig/network-scripts
>>
>> vim /etc/sysconfig/network-scripts/ifcfg-eth0
>>
>>  
>>
>> DEVICE=eth0
>>
>> BOOTPROTO=none
>>
>> NM_CONTROLLED=no
>>
>> ONBOOT=yes
>>
>> BRIDGE=ovirtmgmt
>>
>> vim /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
>>
>>  
>>
>> DEVICE=ovirtmgmt
>>
>> BOOTPROTO=static
>>
>> GATEWAY=xxx.xxx.xxx.xxx
>>
>> IPADDR=xxx.xxx.xxx.xxx
>>
>> NETMASK=255.255.255.0
>>
>> NM_CONTROLLED=no
>>
>> ONBOOT=yes
>>
>> TYPE=Bridge
>>
>>  
>>
>> It will work. I think this working installation has now overwritten my not working log. So I cant post. It is a centos 6.2 host.
>>
>>  
>>
>> Regards,
>>
>>  
>>
>> rene
>>
>>  
>>
>>  
>>
>> *Von:*users-bounces at ovirt.org [mailto:users-bounces at ovirt.org] *Im 
>> Auftrag von *Haim Ateya
>> *Gesendet:* Dienstag, 27. März 2012 11:59
>> *An:* users at ovirt.org
>> *Betreff:* Re: [Users] Adding Host
>>
>>  
>>
>> On 03/27/2012 11:52 AM, Rene Rosenberger wrote:
>>
>> Hi,
>>
>>  
>>
>> i have installed ovirt successfully. When I now want to add a host on which KVM is already installed I get an error. I try to add it over the web gui with add new host. Thne a installation progress is starting on the remote host and I get an error during this progress:
>>
>>  
>>
>> Step: SetNetworking; Details: addNetwork error trying to add management bridge.
>>
>>  
>>
>> What can I do?
>>
>>
>> could you please attach installation logs located under /tmp/ on installed host ?
>> what type of host are you trying to add ? is it RHEL or Fedora ?
>>
>>
>>  
>>
>> Regards, rene
>>
>>  
>>
>>
>>
>>
>> _______________________________________________
>>
>> Users mailing list
>>
>> Users at ovirt.org <mailto:Users at ovirt.org>
>>
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>  
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>