[Users] Adding oVirt Node Fails

Thu May 3 03:40:13 UTC 2012

On 05/03/2012 04:29 AM, Nicholas Kesick wrote:
> Update: Please see my previous email and attachments as that may provide
> more info still.
>
> I manually renamed the bridge from breth0 to ovirtmgmt (edited
> /etc/sysconfig/network-scripts/ifcfg-eth0, copied
> /etc/sysconfig/network-scripts/ifcfg-breth0 to ifcfg-ovirtmgmt) then
> connected the network in the TUI and it came up correctly. Added the
> host, then tried approving it. So the error about not being able to
> rename the bridge disappeared, and it now shows in vdsm-reg.log that it
> got as far as copying engine.ssh.key.txt... but the manager still
> reports that "Failed to install Host Fedora16: Step: instCert", "Host
> Fedora16 was successfully approved" and host status of "Install failed".
>
> I've attached the contents of /var/log/vdsm-reg/* and /tmp/vds_* and a
> screenshot of the event log from the manager.

this seems the relevant part from log:
Thu, 26 Apr 2012 06:57:04 DEBUG    instCert: failed.
Traceback (most recent call last):
   File "/usr/share/vdsm-reg/deployUtil.py", line 1133, in instCert
   File "/usr/share/vdsm-reg/deployUtil.py", line 1098, in pkiCleanup
OSError: [Errno 16] Device or resource busy: 
'/etc/pki/vdsm/certs/cacert.pem'

have you tried rebooting the host between tries to clear potential issues?
doron?

>
> - Nick
> ------------------------------------------------------------------------
> From: cybertimber2000 at hotmail.com
> To: dfediuck at redhat.com
> Date: Wed, 2 May 2012 17:59:08 -0400
> CC: users at ovirt.org
> Subject: Re: [Users] Adding oVirt Node Fails
>
> Douglas,
>
> This happens after the approval part. So after I click approve is when
> it says the install cert failed, then reports that the approval suceeded
> (in events), but that the installation failed (in host status).
> Looking into the SSH keys, but I have attached the /var/log/vdsm-reg/*
> files from the node in question. It still seems to imply issues with
> renaming the bridge, so I'm looking into that now.
>
> I also cleared out and reset /root/.ssh/authorized_keys on the node, but
> no dice there. Maybe the first time it wasn't populated, hence the
> failed to read?
>
> - Nick
>
>
>  > Date: Wed, 2 May 2012 13:28:26 +0300
>  > From: dfediuck at redhat.com
>  > To: cybertimber2000 at hotmail.com
>  > CC: dougsland at redhat.com; users at ovirt.org
>  > Subject: Re: [Users] Adding oVirt Node Fails
>  >
>  > Hi Nick,
>  > You managed to add one log which complains about:
>  > Tue, 01 May 2012 18:00:18 DEBUG Failed to read /root/.ssh/authorized_keys
>  >
>  > Can you check this file inside your host?
>  >
>  > Also, it seems that you're adding it via the UI (New host), while
> such hosts
>  > in most cases will register if properly configured, and show up with
> PendingApproval
>  > status in the UI.
>  > So please add the logs you have in the host under /var/log/vdsm-reg/
>  >
>  >
>  > On 02/05/12 01:12, Nicholas Kesick wrote:
>  > > Douglas,
>  > >
>  > > VDSM is version 3.9.3.3. I'm not sure which error message you are
> refering to, but I attached the events from oVirt Manager as well as
> /tmp/vds_* from the node.
>  > >
>  > > Thanks,
>  > > - Nick
>  > >
>  > >
>  > >
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------!
>  > ---
>  > > Date: Tue, 1 May 2012 00:53:52 -0400
>  > > From: dougsland at redhat.com
>  > > To: users at ovirt.org
>  > > CC: cybertimber2000 at hotmail.com
>  > > Subject: Re: [Users] Adding oVirt Node Fails
>  > >
>  > > Hi Nicholas,
>  > >
>  > > On 04/30/2012 10:56 PM, Nicholas Kesick wrote:
>  > >
>  > > It's called "breth0". I've been tempted to rename it manually, but
> my understanding is that it's not persistant. Worth testing though.
>  > > dougsland, jboggs said you may know something about this being a
> bug in the stable version and is fixed in nightlies?
>  > >
>  > >
>  > > Can you please share your vdsm version and the full error message?
> /tmp/vds_* files would be nice too
>  > >
>  > > Here a patch that might help:
> http://gerrit.ovirt.org/#patch,sidebyside,3615,5,vdsm/configNetwork.py
> <http://gerrit.ovirt.org/#patch%2csidebyside%2c3615%2c5%2cvdsm/configNetwork.py>
> (already merged into vdsm tree)
>  > >
>  > >
>  > > Thanks!
>  > >
>  > > --
>  > > Cheers
>  > > Douglas
>  > >
>  > >
>  > >
>  > > _______________________________________________
>  > > Users mailing list
>  > > Users at ovirt.org
>  > > http://lists.ovirt.org/mailman/listinfo/users
>  >
>  >
>  > --
>  >
>  > /d
>  >
>  > "Willyoupleasehelpmefixmykeyboard?Thespacebarisbroken!"
>
> _______________________________________________ Users mailing list
> Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users