[Users] Host missing cpuFlags
Itamar Heim
iheim at redhat.com
Fri May 4 06:48:23 UTC 2012
On 05/04/2012 09:23 AM, ovirt at qip.ru wrote:
> Engine is incorrectly show cpu name (cluster compatibility is set to 3.1)
>
> all hosts in my cluster engine are shown as Conroe, but I have 2 hosts
> from Nehalem family and 2 from SandyBridge
>
> this host must be SandyBridge but shown as Conroe
vdsm reports the model at the end of the cpuFlags based on libvirt
reporting models. cc'ing libvirt list for their thoughts.
>
> # vdsClient -s 0 getVdsCaps
> HBAInventory = {'iSCSI': [{'InitiatorName':
> 'iqn.1994-05.com.redhat:7e8ac59efbe0'}], 'FC': []}
> ISCSIInitiatorName = iqn.1994-05.com.redhat:7e8ac59efbe0
> bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask':
> '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '',
> 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr':
> '00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu': '1500',
> 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond2':
> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [],
> 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {}, 'mtu':
> '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}}
> clusterLevels = ['3.0', '3.1']
> cpuCores = 4
> cpuFlags =
> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_coreduo,model_Conroe
> cpuModel = Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz
> cpuSockets = 1
> cpuSpeed = 1600.000
> emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12',
> 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13',
> 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc']
> guestOverhead = 65
> hooks = {}
> kvmEnabled = true
> lastClient = 192.168.131.42
> lastClientIface = ovirtmgmt
> management_ip =
> memSize = 16032
> networks = {'ovirtmgmt': {'addr': '192.168.130.73', 'cfg': {'DELAY':
> '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt',
> 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask':
> '255.255.0.0', 'stp': 'off', 'bridged': 'True', 'gateway':
> '192.168.131.17', 'ports': ['p6p1']}, 'Storage': {'addr':
> '172.16.0.100', 'cfg': {'IPADDR': '172.16.0.100', 'DELAY': '0',
> 'NETMASK': '255.255.255.0', 'STP': 'no', 'DEVICE': 'Storage', 'TYPE':
> 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0',
> 'stp': 'off', 'bridged': 'True', 'gateway': '0.0.0.0', 'ports': ['p4p1']}}
> nics = {'p4p1': {'hwaddr': '00:1B:21:1D:B6:E2', 'netmask': '', 'speed':
> 1000, 'addr': '', 'mtu': '1500'}, 'p6p1': {'hwaddr':
> '54:04:A6:A1:BA:39', 'netmask': '', 'speed': 1000, 'addr': '', 'mtu':
> '1500'}}
> operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'}
> packages2 = {'kernel': {'release': '6.fc16.x86_64', 'buildtime':
> 1334997800.0, 'version': '3.3.2'}, 'spice-server': {'release': '1.fc16',
> 'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release':
> '0.161.git094ec00.fc16', 'buildtime': '1336045451', 'version': '4.9.6'},
> 'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version':
> '0.15.1'}, 'libvirt': {'release': '1.fc16', 'buildtime': '1336048215',
> 'version': '0.9.11.3'}, 'qemu-img': {'release': '4.fc16', 'buildtime':
> '1327954752', 'version': '0.15.1'}}
> reservedMem = 321
> software_revision = 0
> software_version = 4.9
> supportedProtocols = ['2.2', '2.3']
> supportedRHEVMs = ['3.0']
> uuid = 1C8F4D00-5BCB-11D9-8A55-5404A6A1BA39_00:1B:21:1D:B6:E2
> version_name = Snow Man
> vlans = {}
> vmTypes = ['kvm']
>
>
>
> this host must be Nehalem but shown as Conroe
>
> # vdsClient -s 0 getVdsCaps
> HBAInventory = {'iSCSI': [{'InitiatorName':
> 'iqn.1994-05.com.redhat:972b88629c1'}], 'FC': []}
> ISCSIInitiatorName = iqn.1994-05.com.redhat:972b88629c1
> bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask':
> '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '',
> 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr':
> '00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu': '1500',
> 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond2':
> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [],
> 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {}, 'mtu':
> '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}}
> clusterLevels = ['3.0', '3.1']
> cpuCores = 8
> cpuFlags =
> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,lahf_lm,ida,arat,epb,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,model_coreduo,model_Conroe
> cpuModel = Intel(R) Xeon(R) CPU E5620 @ 2.40GHz
> cpuSockets = 2
> cpuSpeed = 1600.000
> emulatedMachines = ['pc-0.14', 'pc', 'fedora-13', 'pc-0.13', 'pc-0.12',
> 'pc-0.11', 'pc-0.10', 'isapc', 'pc-0.14', 'pc', 'fedora-13', 'pc-0.13',
> 'pc-0.12', 'pc-0.11', 'pc-0.10', 'isapc']
> guestOverhead = 65
> hooks = {}
> kvmEnabled = true
> lastClient = 192.168.131.42
> lastClientIface = ovirtmgmt
> management_ip =
> memSize = 36200
> networks = {'ovirtmgmt': {'addr': '192.168.131.46', 'cfg': {'DELAY':
> '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'dhcp', 'DEVICE': 'ovirtmgmt',
> 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask':
> '255.255.0.0', 'stp': 'off', 'bridged': 'True', 'gateway':
> '192.168.131.17', 'ports': ['em1']}, 'Storage': {'addr': '172.16.0.104',
> 'cfg': {'IPADDR': '172.16.0.104', 'DELAY': '0', 'NM_CONTROLLED': 'no',
> 'NETMASK': '255.255.255.0', 'STP': 'no', 'DEVICE': 'Storage', 'TYPE':
> 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0',
> 'stp': 'off', 'bridged': 'True', 'gateway': '0.0.0.0', 'ports': ['em2']}}
> nics = {'em1': {'hwaddr': '00:25:90:66:53:E8', 'netmask': '', 'speed':
> 1000, 'addr': '', 'mtu': '1500'}, 'em2': {'hwaddr': '00:25:90:66:53:E9',
> 'netmask': '', 'speed': 100, 'addr': '', 'mtu': '1500'}}
> operatingSystem = {'release': '1', 'version': '16', 'name': 'oVirt Node'}
> packages2 = {'kernel': {'release': '6.fc16.x86_64', 'buildtime':
> 1334997800.0, 'version': '3.3.2'}, 'spice-server': {'release': '1.fc16',
> 'buildtime': '1327339129', 'version': '0.10.1'}, 'vdsm': {'release':
> '0.155.git457d1a0.fc16', 'buildtime': '1335883691', 'version': '4.9.6'},
> 'qemu-kvm': {'release': '4.fc16', 'buildtime': '1327954752', 'version':
> '0.15.1'}, 'libvirt': {'release': '1.fc16', 'buildtime': '1335356374',
> 'version': '0.9.11'}, 'qemu-img': {'release': '4.fc16', 'buildtime':
> '1327954752', 'version': '0.15.1'}}
> reservedMem = 321
> software_revision = 0
> software_version = 4.9
> supportedProtocols = ['2.2', '2.3']
> supportedRHEVMs = ['3.0']
> uuid = 49434D53-0200-9066-2500-66902500E853_00:25:90:66:53:E8
> version_name = Snow Man
> vlans = {}
> vmTypes = ['kvm']
>
>
>
> Птн 04 Май 2012 09:14:22 +0400, Itamar Heim <iheim at redhat.com> написал:
>
> On 05/04/2012 06:49 AM, Nicholas Kesick wrote:
> > I managed to get a host successfully added into oVirt Manager
> (Fedora16
> > minimum install, then used the wiki RPM install method), but the
> last
> > event reports "Host <hostname> moved to Non-operational state as
> host
> > does not meet the cluster's minimum CPU level. Missing CPU features:
> > CpuFlags"
> >
> > Can anyone shine some light on the problem? The CPU does support
> > virtualization... and as far as I can tell from cat /proc/cpuinfo
> does
> > does have cpu flags.
> > flags : fpu vme de pse tsc msr *pae* mce cx8 apic sep mtrr pge
> mca cmov
> > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall
> nx lm
> > constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl *vmx* est
> cid cx16
> > xtpr pdcm lahf_lm tpr_shadow
>
> what is the cpu level of the cluster?
> what cluster compatibility level?
> what does vdsClient -s 0 getVdsCaps shows for cpu flags?
>
> >
> > Many thanks
> > - Nick
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > nicspellword"="">ovirt.org/mailman/listinfo/users" title="Открыть
> внешнюю ссылку">http://lists.ovirt.org/mailman/listinfo/users
> <http://lists.%3Cspan%20class=>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> nicspellword"="">ovirt.org/mailman/listinfo/users" title="Открыть
> внешнюю ссылку">http://lists.ovirt.org/mailman/listinfo/users
> <http://lists.%3Cspan%20class=>
>
>
>
> --
>
More information about the Users
mailing list