[Users] non-operational state as host does not meet clusters' minimu CPU level.

wujieke wujieke at qiyi.com
Fri Sep 21 00:54:17 UTC 2012


[root at localhost ~]# vdsClient -s 0 getVdsCaps | grep -i flags
        cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clfl
ush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,con
stant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmpe
rf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,
pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_l
m,ida,arat,epb,xsaveopt,pln,pts,dts,tpr_shadow,vnmi,flexpriority,ept,vpid,mo
del_coreduo,model_Conroe

seems only support model_Conroe?

-----Original Message-----
From: Itamar Heim [mailto:iheim at redhat.com] 
Sent: Thursday, September 20, 2012 10:04 PM
To: wujieke
Cc: node-devel at ovirt.org; users at ovirt.org
Subject: Re: [Users] non-operational state as host does not meet clusters'
minimu CPU level.

On 09/20/2012 12:19 PM, wujieke wrote:
> Hi, everyone, if it's not the right mail list, pls point out.. thanks..
>
> I am trying to install the ovirt on my Xeon E5-2650 process on Dell 
> server, which is installed with Fedora 17. While I create a new host , 
> which actually is the same server as overt-engine is running.
>
> The host is created ,and starting to "installing". But it ends with 
> "Non operational state".
>
> Error:
>
> Host CPU type is not compatible with cluster properties, missing CPU
> feature: model_sandybridge.
>
> But in my cluster, I select "sandybridge" CPU, and my Xeon C5 is also 
> in Sandy bridge family.  And also this error lead my server reboot.
>
> Any help is appreciated.
>
> Btw: I have enable INTEL-VT in BIOS. And modprobe KVM and kvm-intel 
> modules. . attached is screen shot for error.
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>

please send output of this command from the host (not engine) vdsClient -s 0
getVdsCaps | grep -i flags




More information about the Users mailing list