[Users] Node startup issue

[Itamar Heim]

On 09/10/2012 03:28 PM, Vincent Miszczak wrote:
> Hi guys,
>
> I cannot get my node vdsmd start when host boots up, and I really cannot
> get why. (Fedora 17, ovirt-stable repo)
>
> I can launch the service by hand and it’s working as expected when I do
> so, but I really need the service to be launched at boot.
>
> After a fresh startup, here is what I get :
>
> /[root at ovirt-node-01 ~]# systemctl status vdsmd.service/
>
> /vdsmd.service - Virtual Desktop Server Manager/
>
> /          Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled)/
>
> /          Active: inactive (dead)/
>
> /          CGroup: name=systemd:/system/vdsmd.service/
>
> /[root at ovirt-node-01 ~]# systemctl status libvirtd.service/
>
> /libvirtd.service - Virtualization daemon/
>
> /          Loaded: loaded (/usr/lib/systemd/system/libvirtd.service;
> enabled)/
>
> /          Active: active (running) since Mon, 10 Sep 2012 12:39:41
> +0200; 1h 35min ago/
>
> /        Main PID: 1053 (libvirtd)/
>
> /          CGroup: name=systemd:/system/libvirtd.service/
>
> /                  └ 1053 /usr/sbin/libvirtd --listen/
>
> //
>
> /Sep 10 12:39:43 ovirt-node-01.ankama.lan libvirtd[1053]: Could not find
> keytab file: /etc/libvirt/krb5.tab: No such file or directory/
>
> /Sep 10 12:39:43 ovirt-node-01.ankama.lan libvirtd[1053]: server
> add_plugin entry_point error generic failure/
>
> /Sep 10 12:39:43 ovirt-node-01.ankama.lan libvirtd[1053]:
> _sasl_plugin_load failed on sasl_server_plug_init for plugin: gssapiv2/
>
> /var/log/vdsm/vdsm.log has no log on startup
>
> /[root at ovirt-node-01 ~]# ls -al /var/log/vdsm/vdsm.log/
>
> /-rw-r--r--. 1 vdsm kvm 9763810 Sep 10 12:20 /var/log/vdsm/vdsm.log/
>
> //
>
> /[root at ovirt-node-01 ~]# ls -al /var/log/vdsm-reg/vdsm-reg.log/
>
> /ls: cannot access /var/log/vdsm-reg/vdsm-reg.log: No such file or
> directory/
>
> Trying to look at systemd logs, I get results I really don’t understand :
>
> [  OK  ] Started Permit User Sessions.
>
> [  OK  ] Started Security Auditing Service.
>
> [  OK  ] Started Kernel Samepage Merging.
>
> [  OK  ] Started ACPI Event Daemon.
>
> [  OK  ] Started Install ABRT coredump hook.
>
> [  OK  ] Started Harvest vmcores for ABRT.
>
> [  OK  ] Started irqbalance daemon.
>
> [  OK  ] Started Machine Check Exception Logging Daemon.
>
> [  OK  ] Started D-Bus System Message Bus.
>
> [  OK  ] Started NTP client/server.
>
> [  OK  ] Reached target Network Time Protocol.
>
>           Starting Kernel Samepage Merging (KSM) Tuning Daemon...
>
>           Starting Command Scheduler...
>
> [  OK  ] Started Command Scheduler.
>
>           Starting Job spooling tools...
>
> [  OK  ] Started Job spooling tools.
>
>           Starting Wait for Plymouth Boot Screen to Quit...
>
>           Starting LSB: Bring up/down networking...
>
> [  OK  ] Started Kernel Samepage Merging (KSM) Tuning Daemon.
>
> [  OK  ] Started Device-Mapper Multipath Device Controller.
>
>           Starting LSB: Starts and stops login iSCSI daemon....
>
> [  OK  ] Started Login Service.
>
> [  OK  ] Started Avahi mDNS/DNS-SD Stack.
>
> [  OK  ] Started LSB: Starts and stops login iSCSI daemon..
>
> [  OK  ] Started LSB: Bring up/down networking.
>
> [  OK  ] Reached target Network.
>
>           Starting LSB: Starts and stops login and scanning of iSCSI
> devices....
>
>           Starting Virtualization daemon...
>
> [  OK  ] Started Virtualization daemon.
>
>           Starting GlusterFS an clustered file-system server...
>
>           Starting Link Layer Discovery Protocol Agent Daemon....
>
> [  OK  ] Started Link Layer Discovery Protocol Agent Daemon..
>
>           Starting Open-FCoE Inititator....
>
>           Starting NFS Server...
>
>           Starting OpenSSH server daemon...
>
>           Starting Sendmail Mail Transport Agent...
>
>           Starting RPC bind service...
>
> [  OK  ] Started LSB: Starts and stops login and scanning of iSCSI devices..
>
> [  OK  ] Started GlusterFS an clustered file-system server.
>
> [  OK  ] Started OpenSSH server daemon.
>
> [  OK  ] Started RPC bind service.
>
> [  OK  ] Started Open-FCoE Inititator..
>
>           Starting NFS file locking service....
>
>           Starting GlusterFS an clustered file-system server...
>
>           Starting SYSV: Late init script for live image....
>
> [  OK  ] Started GlusterFS an clustered file-system server.
>
> [  OK  ] Started SYSV: Late init script for live image..
>
>           Starting Display Manager...
>
> [  OK  ] Started Display Manager.
>
> [  OK  ] Started NFS Server.
>
>           Starting NFS Mount Daemon...
>
>           Starting NFS Remote Quota Server...
>
>           Starting NFSv4 ID-name mapping daemon...
>
> [  OK  ] Started NFS file locking service..
>
> [  OK  ] Started NFS Remote Quota Server.
>
> [  OK  ] Started NFS Mount Daemon.
>
> Everything is OK but where is my vdsmd startup ?
>
> Looking at journalctl, vdsmd is not logged at all but libvirtd is.
>
> vdsmd depends on ntpd, but it is not logged neither (and is marked dead
> also, and like vdsmd, I can launch it by hand and it works in that case).
>
> Why those services are not logged ? How am I supposed to debug without
> any information ? Is it normal that an enabled service don’t log at all ?
>
> Any help would be appreciated.
>
> Regards
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
> believed to be clean.
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>


not sure vdsm is supposed to start before you add/approve it in engine.