[Users] host non responsive in a 1 host DC with 1 vm

[Eli Mesika]

----- Original Message -----
> From: "Neil" <nwilson123 at gmail.com>
> To: users at ovirt.org
> Sent: Thursday, March 28, 2013 3:32:41 PM
> Subject: [Users] host non responsive in a 1 host DC with 1 vm
> 
> Hi guys,
> 
> I've got a test oVirt setup with only 1 host and 1 test VM but I had a
> power failure and the host is now non responsive, despite being able
> to log into it via SSH. Manually fencing results in a.... "Manual
> fence did not revoke the selected SPM (ovirthosttest) since the master
> storage domain was not active or could not use another host for the
> fence operation."   When I try put the host into maintenance I get
> ..."Manual fence did not revoke the selected SPM (ovirthosttest) since
> the master storage domain was not active or could not use another host
> for the fence operation."  When I try and activate the data domain I
> get... "Failed to activate Storage Domain MAIN (Data Center Default)
> by admin at internal".  My VM was in an unknown state, but considering
> I'd already had a power failure, I logged into my oVirt engine
> postgres command line and ran "update vm_dynamic set status = 0 where
> vm_guid = (select vm_guid from vm_static where vm_name = 'zimbra');"
> to try and force my VM into a down state, but that hasn't helped
> either.  I'd imagine that if I had another host to add to the cluster
> SPM would hopefully move to the new host and the problem would
> disappear, but I don't have one unfortunately.
> 
> Any suggestions?
> 
> Centos 6.4
> 
> vdsm-python-4.10.3-0.31.20.el6.x86_64
> vdsm-4.10.3-0.31.20.el6.x86_64
> vdsm-cli-4.10.3-0.31.20.el6.noarch
> vdsm-xmlrpc-4.10.3-0.31.20.el6.noarch
> libvirt-lock-sanlock-0.10.2-18.el6.x86_64
> libvirt-client-0.10.2-18.el6.x86_64
> libvisual-0.4.0-9.1.el6.x86_64
> libvirt-python-0.10.2-18.el6.x86_64
> libvirt-0.10.2-18.el6.x86_64
> 
> On my engine it's Centos 6.4 with ovirt-engine-3.2.0-1.39.el6.noarch
> My engine has an NFS shared RAID array which the hosts the entire data
> domain.
> 
> I could can the entire install and start again, but I'd prefer to
> avoid doing that if possible as I'm still in the process of migrating
> email to my zimbra VM.
> 
> Any help is appreciated greatly.

Hi Neil
This was solved in patch http://gerrit.ovirt.org/#/c/13045/



> 
> Thanks.
> 
> Regards.
> 
> Neil Wilson.
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>