[Users] Certificates and PKI seem to be broken after yum update
Chris Smith
whitehat237 at gmail.com
Fri Apr 19 00:40:55 UTC 2013
Since I'm not able to reinstall the host from the ovirt-engine web
interface, as another thought I wanted to see if I could bring up a
third host and add it to the cluster.
I have a host Fedora 17 box ready to go but I can't add it to the
cluster. It states that there are no available server in the cluster
to probe the new host.
What about approaching it from the other direction. Would I be able
to stand up an ovirt-h node on the same hardware and then add it to
ovirt from the host itself, using the setup menu?
Could it then obtain spm status and bring the storage domain online?
On Thu, Apr 18, 2013 at 7:20 PM, Chris Smith <whitehat237 at gmail.com> wrote:
> engine.log attached
>
> On Thu, Apr 18, 2013 at 7:11 PM, Alon Bar-Lev <alonbl at redhat.com> wrote:
>> Need to know precise error, please attach engine.log.
>>
>>
>> ----- Original Message -----
>>> From: "Chris Smith" <whitehat237 at gmail.com>
>>> To: "Alon Bar-Lev" <alonbl at redhat.com>
>>> Cc: Users at ovirt.org
>>> Sent: Friday, April 19, 2013 2:03:59 AM
>>> Subject: Re: [Users] Certificates and PKI seem to be broken after yum update
>>>
>>> So as of now, I can put the host into maintenance mode using the
>>> ovirt-engine web interface. I can also try and activate it. It
>>> states that the host was activated. The host never actually comes up
>>> or contends for SPM status, and the data center never actually comes
>>> online.
>>>
>>> If I put the host into maintenance mode and try to reinstall it, it
>>> throws an error and size must be between 0 and 50.
>>>
>>> On Thu, Apr 18, 2013 at 6:51 PM, Alon Bar-Lev <alonbl at redhat.com> wrote:
>>> > I am not sure I understand the status.
>>> >
>>> > Everything is working or not.
>>> > If not, what exactly fails?
>>> > Why do you run it 'again'?
>>> >
>>> > What happens if you reinstall host? Go to maintenance and select reinstall?
>>> >
>>> > I cannot understand how all this results from upgrade, something had
>>> > changed, the CA certificate installed on the host is probably not the CA
>>> > certificate of the engine.
>>> >
>>> > ----- Original Message -----
>>> >> From: "Chris Smith" <whitehat237 at gmail.com>
>>> >> To: "Alon Bar-Lev" <alonbl at redhat.com>, Users at ovirt.org
>>> >> Sent: Friday, April 19, 2013 1:45:23 AM
>>> >> Subject: Re: [Users] Certificates and PKI seem to be broken after yum
>>> >> update
>>> >>
>>> >> On Thu, Apr 18, 2013 at 6:44 PM, Chris Smith <whitehat237 at gmail.com>
>>> >> wrote:
>>> >> > I made a backup of the .truststore, and then followed the steps and
>>> >> > then rebooted both the ovirt-engine and one of the hosts, and
>>> >> > everything worked properly.
>>> >> >
>>> >> > If I run it again, or enter the wrong password it throws an error
>>> >> > about the key store already existing, or that the password was wrong
>>> >> > so I'm pretty sure it's good.
>>> >> >
>>> >> > vdsm.log on the host still shows:
>>> >> >
>>> >> > Traceback (most recent call last):
>>> >> > File "/usr/lib64/python2.7/SocketServer.py", line 582, in
>>> >> > process_request_thread
>>> >> > self.finish_request(request, client_address)
>>> >> > File "/usr/lib/python2.7/site-packages/vdsm/SecureXMLRPCServer.py",
>>> >> > line 66, in finish_request
>>> >> > request.do_handshake()
>>> >> > File "/usr/lib64/python2.7/ssl.py", line 305, in do_handshake
>>> >> > self._sslobj.do_handshake()
>>> >> > SSLError: [Errno 1] _ssl.c:504: error:14094416:SSL
>>> >> > routines:SSL3_READ_BYTES:sslv3 alert certificate unknown
>>> >> >
>>> >> > engine.log on the host shows:
>>> >> >
>>> >> > 2013-04-18 18:42:43,632 ERROR
>>> >> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
>>> >> > (QuartzScheduler_Worker-68) Failed to decryptData must start with zero
>>> >> > 2013-04-18 18:42:43,642 ERROR
>>> >> > [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
>>> >> > (QuartzScheduler_Worker-68) XML RPC error in command
>>> >> > GetCapabilitiesVDS ( Vds: transporter ), the error was:
>>> >> > java.util.concurrent.ExecutionException:
>>> >> > java.lang.reflect.InvocationTargetException,
>>> >> > SunCertPathBuilderException: unable to find valid certification path
>>> >> > to requested target
>>> >> >
>>> >> >
>>> >> > On Thu, Apr 18, 2013 at 4:06 AM, Alon Bar-Lev <alonbl at redhat.com> wrote:
>>> >> >>
>>> >> >> You should ask these question in separate thread so people may pick
>>> >> >> them
>>> >> >> up.
>>> >> >>
>>> >> >> For the .truststore, try to remove it and then execute:
>>> >> >>
>>> >> >> # rm -f /etc/pki/ovirt-engine/.truststore
>>> >> >> # keytool -import -noprompt -trustcacerts -alias cacert -keypass mypass
>>> >> >> -file /etc/pki/ovirt-engine/certs/ca.der -keystore
>>> >> >> /etc/pki/ovirt-engine/.truststore -storepass mypass
>>> >> >> # chown ovirt:ovirt /etc/pki/ovirt-engine/.truststore
>>> >> >>
>>> >> >> It should recreate the truststore with the ca certificate you have.
>>> >> >>
>>> >> >> ----- Original Message -----
>>> >> >>> From: "Chris Smith" <whitehat237 at gmail.com>
>>> >> >>> To: "Alon Bar-Lev" <alonbl at redhat.com>
>>> >> >>> Cc: Users at ovirt.org
>>> >> >>> Sent: Thursday, April 18, 2013 7:18:27 AM
>>> >> >>> Subject: Re: [Users] Certificates and PKI seem to be broken after yum
>>> >> >>> update
>>> >> >>>
>>> >> >>> If it would be easier than re-setting up the certificates, I'm also
>>> >> >>> willing to just start over and rebuild, but I would like to export the
>>> >> >>> VM's I have first.
>>> >> >>> One of them is a spacewalk server, another runs DNS, and DHCP for my
>>> >> >>> test network, and I have an asterisk server. I would like to avoid
>>> >> >>> having to re-create all of them.
>>> >> >>>
>>> >> >>> The VM's are up and running now, so I could export all of the
>>> >> >>> configurations / backup the file systems, etc.
>>> >> >>>
>>> >> >>> Preferably I could export the VM's to an NFS export domain, or a
>>> >> >>> mounted NFS share so that I can import them to the new storage domain,
>>> >> >>> after I run engine-cleanup and get everything set back up. Is there
>>> >> >>> an easy way to do this? Is it possible to create and attach an NFS
>>> >> >>> export domain directly from the CLI without access to the ovirt
>>> >> >>> manager without communication between the manager and hosts due to the
>>> >> >>> pki issue? Can I export the VM's directly from the hosts to a
>>> >> >>> standard NFS share?
>>> >> >>>
>>> >> >>> Is there an equivalent xml and image file for the VM?
>>> >> >>>
>>> >> >>> My storage domain is iscsi and is served out from another server over
>>> >> >>> 4 bonded 1 Gbps copper links.
>>> >> >>>
>>> >> >>>
>>> >> >>>
>>> >> >>> On Wed, Apr 17, 2013 at 11:46 PM, Chris Smith <whitehat237 at gmail.com>
>>> >> >>> wrote:
>>> >> >>> > I checked the .truststore on the ovirt engine, and it seems fine.
>>> >> >>> >
>>> >> >>> > [root at reliant ovirt-engine]# ls -l .truststore
>>> >> >>> > -rwxr-x---. 1 ovirt ovirt 918 Apr 6 21:56 .truststore
>>> >> >>> >
>>> >> >>> > It's not zero bytes anyway.
>>> >> >>> >
>>> >> >>> > It's also the same size as the .truststore in the ovirt engine
>>> >> >>> > backups.
>>> >> >>> >
>>> >> >>> > [root at reliant ovirt-engine-backups]# find ./ -name .truststore -exec
>>> >> >>> > ls
>>> >> >>> > -l
>>> >> >>> > {} \;
>>> >> >>> > -rwxr-x---. 1 ovirt ovirt 918 Aug 26 2012
>>> >> >>> > ./ovirt-engine-2013_03_23_03_09_09/ovirt-engine/.truststore
>>> >> >>> > -rwxr-x---. 1 root root 918 Mar 24 12:42
>>> >> >>> > ./ovirt-engine-2013_03_24_11_15_19/ovirt-engine-2013_03_23_03_09_09/ovirt-engine/.truststore
>>> >> >>> >
>>> >> >>> > I haven't looked at the installCA.sh script yet.
>>> >> >>> >
>>> >> >>> > On Mon, Apr 8, 2013 at 2:58 AM, Alon Bar-Lev <alonbl at redhat.com>
>>> >> >>> > wrote:
>>> >> >>> >> This error means that the /etc/pki/ovirt-engine/.truststore is
>>> >> >>> >> unreadable
>>> >> >>> >> or does not contain the /etc/pki/ovirt-engine/ca.pem certificate.
>>> >> >>> >>
>>> >> >>> >> Unfortunately, the pki administration is weak in current
>>> >> >>> >> implementation,
>>> >> >>> >> you can trace the installation script and checkout the calls to
>>> >> >>> >> installCA.sh to how to reproduce, please note that password are
>>> >> >>> >> encrypted
>>> >> >>> >> in database using the private key locate in .keystore so if you are
>>> >> >>> >> to
>>> >> >>> >> re-generate anything remember to keep the engine private key.
>>> >> >>> >>
>>> >> >>> >> However, if you succeed in login, the remaining problem you have is
>>> >> >>> >> the
>>> >> >>> >> .truststore permissions and/or content.
>>> >> >>> >>
>>> >> >>> >> Regards,
>>> >> >>> >> Alon Bar-Lev.
>>> >> >>> >>
>>> >> >>> >> ----- Original Message -----
>>> >> >>> >>> From: "Chris Smith" <whitehat237 at gmail.com>
>>> >> >>> >>> To: "Alon Bar-Lev" <alonbl at redhat.com>
>>> >> >>> >>> Cc: Users at ovirt.org
>>> >> >>> >>> Sent: Monday, April 8, 2013 9:46:46 AM
>>> >> >>> >>> Subject: Re: [Users] Certificates and PKI seem to be broken after
>>> >> >>> >>> yum
>>> >> >>> >>> update
>>> >> >>> >>>
>>> >> >>> >>> After setting the .keystore owner and group owner to ovirt, and
>>> >> >>> >>> rebooting, I now have a new error in engine.log
>>> >> >>> >>>
>>> >> >>> >>> 2013-04-08 02:39:16,787 ERROR
>>> >> >>> >>> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
>>> >> >>> >>> (QuartzScheduler_Worker-95) Failed to decryptData must start with
>>> >> >>> >>> zero
>>> >> >>> >>> 2013-04-08 02:39:16,845 ERROR
>>> >> >>> >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
>>> >> >>> >>> (QuartzScheduler_Worker-95) XML RPC error in command
>>> >> >>> >>> GetCapabilitiesVDS ( Vds: transporter ), the error was:
>>> >> >>> >>> java.util.concurrent.ExecutionException:
>>> >> >>> >>> java.lang.reflect.InvocationTargetException,
>>> >> >>> >>> SunCertPathBuilderException: unable to find valid certification
>>> >> >>> >>> path
>>> >> >>> >>> to requested target
>>> >> >>> >>>
>>> >> >>> >>> Are there other files that may have been affected that I can also
>>> >> >>> >>> correct ownership or permissions on?
>>> >> >>> >>>
>>> >> >>> >>> On the host side, I get certificate unknown in vdsm.log
>>> >> >>> >>>
>>> >> >>> >>> File "/usr/lib64/python2.7/ssl.py", line 305, in do_handshake
>>> >> >>> >>> self._sslobj.do_handshake()
>>> >> >>> >>> SSLError: [Errno 1] _ssl.c:504: error:14094416:SSL
>>> >> >>> >>> routines:SSL3_READ_BYTES:sslv3 alert certificate unknown
>>> >> >>> >>> Thread-757809::ERROR::2013-04-08
>>> >> >>> >>> 02:44:05,424::SecureXMLRPCServer::73::root::(handle_error) client
>>> >> >>> >>> ('172.16.23.8', 54489)
>>> >> >>> >>> Traceback (most recent call last):
>>> >> >>> >>> File "/usr/lib64/python2.7/SocketServer.py", line 582, in
>>> >> >>> >>> process_request_thread
>>> >> >>> >>> self.finish_request(request, client_address)
>>> >> >>> >>> File
>>> >> >>> >>> "/usr/lib/python2.7/site-packages/vdsm/SecureXMLRPCServer.py",
>>> >> >>> >>> line 66, in finish_request
>>> >> >>> >>> request.do_handshake()
>>> >> >>> >>> File "/usr/lib64/python2.7/ssl.py", line 305, in do_handshake
>>> >> >>> >>> self._sslobj.do_handshake()
>>> >> >>> >>> SSLError: [Errno 1] _ssl.c:504: error:14094416:SSL
>>> >> >>> >>> routines:SSL3_READ_BYTES:sslv3 alert certificate unknown
>>> >> >>> >>>
>>> >> >>> >>> Is there a procedure for just re-establishing PKI and certs for
>>> >> >>> >>> the
>>> >> >>> >>> engine and hosts?
>>> >> >>> >>>
>>> >> >>> >>> On Sun, Apr 7, 2013 at 4:58 AM, Alon Bar-Lev <alonbl at redhat.com>
>>> >> >>> >>> wrote:
>>> >> >>> >>> >
>>> >> >>> >>> > OK... you are running a very old version of engine (3.1).
>>> >> >>> >>> >
>>> >> >>> >>> > The upgrade did not upgraded into 3.2, so nothing as far as I
>>> >> >>> >>> > know
>>> >> >>> >>> > should
>>> >> >>> >>> > have been changed.
>>> >> >>> >>> >
>>> >> >>> >>> > But the .keystore permissions is owned by root now, so some
>>> >> >>> >>> > other
>>> >> >>> >>> > package
>>> >> >>> >>> > (maybe selinux-policy) changed permissions...
>>> >> >>> >>> >
>>> >> >>> >>> > The simplest way to test is to:
>>> >> >>> >>> > # cp -a /etc/pki/ovirt-engine /etc/pki/ovirt-engine.backup1
>>> >> >>> >>> > # chown -R ovirt:ovirt /etc/pki/ovirt-engine
>>> >> >>> >>> >
>>> >> >>> >>> > But if that file permissions was changed, I can only assume
>>> >> >>> >>> > other
>>> >> >>> >>> > files
>>> >> >>> >>> > were also changes...
>>> >> >>> >>> >
>>> >> >>> >>> > Regards,
>>> >> >>> >>> > Alon
>>> >> >>> >>> >
>>> >> >>> >>> > ----- Original Message -----
>>> >> >>> >>> >> From: "Chris Smith" <whitehat237 at gmail.com>
>>> >> >>> >>> >> To: "Alon Bar-Lev" <alonbl at redhat.com>
>>> >> >>> >>> >> Cc: Users at ovirt.org
>>> >> >>> >>> >> Sent: Sunday, April 7, 2013 11:51:17 AM
>>> >> >>> >>> >> Subject: Re: [Users] Certificates and PKI seem to be broken
>>> >> >>> >>> >> after
>>> >> >>> >>> >> yum
>>> >> >>> >>> >> update
>>> >> >>> >>> >>
>>> >> >>> >>> >> I did a yum update and rebooted.
>>> >> >>> >>> >>
>>> >> >>> >>> >> engine-upgrade was run on 24-March
>>> >> >>> >>> >>
>>> >> >>> >>> >> When run now, it states that there are no updates available.
>>> >> >>> >>> >>
>>> >> >>> >>> >> [root at reliant ~]# engine-upgrade
>>> >> >>> >>> >> Loaded plugins: versionlock
>>> >> >>> >>> >> Checking for updates... (This may take several minutes)
>>> >> >>> >>> >> No updates available
>>> >> >>> >>> >>
>>> >> >>> >>> >>
>>> >> >>> >>> >> [root at reliant ovirt-engine]# cat
>>> >> >>> >>> >> ovirt-engine-upgrade_2013_03_24_12_04_06.log
>>> >> >>> >>> >> 2013-03-24 12:04:06::DEBUG::common_utils::585::root:: found
>>> >> >>> >>> >> existing
>>> >> >>> >>> >> pgpass file, fetching DB host value
>>> >> >>> >>> >> 2013-03-24 12:04:06::DEBUG::common_utils::585::root:: found
>>> >> >>> >>> >> existing
>>> >> >>> >>> >> pgpass file, fetching DB port value
>>> >> >>> >>> >> 2013-03-24 12:04:06::DEBUG::common_utils::585::root:: found
>>> >> >>> >>> >> existing
>>> >> >>> >>> >> pgpass file, fetching DB admin value
>>> >> >>> >>> >> 2013-03-24 12:04:07::DEBUG::engine-upgrade::302::root:: Yum
>>> >> >>> >>> >> list
>>> >> >>> >>> >> updates
>>> >> >>> >>> >> started
>>> >> >>> >>> >> 2013-03-24 12:04:07::DEBUG::engine-upgrade::273::root:: Yum
>>> >> >>> >>> >> unlock
>>> >> >>> >>> >> started
>>> >> >>> >>> >> 2013-03-24 12:04:07::DEBUG::engine-upgrade::285::root:: Yum
>>> >> >>> >>> >> unlock
>>> >> >>> >>> >> completed successfully
>>> >> >>> >>> >> 2013-03-24 12:04:07::DEBUG::engine-upgrade::308::root:: Getting
>>> >> >>> >>> >> list
>>> >> >>> >>> >> of packages to upgrade
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::engine-upgrade::260::root:: Yum
>>> >> >>> >>> >> lock
>>> >> >>> >>> >> started
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::309::root:: Executing
>>> >> >>> >>> >> command --> '/bin/rpm -q ovirt-engine'
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::335::root:: output =
>>> >> >>> >>> >> ovirt-engine-3.1.0-4.fc17.noarch
>>> >> >>> >>> >>
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::336::root:: stderr =
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::337::root:: retcode =
>>> >> >>> >>> >> 0
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::309::root:: Executing
>>> >> >>> >>> >> command --> '/bin/rpm -q ovirt-engine-backend'
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::335::root:: output =
>>> >> >>> >>> >> ovirt-engine-backend-3.1.0-4.fc17.noarch
>>> >> >>> >>> >>
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::336::root:: stderr =
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::337::root:: retcode =
>>> >> >>> >>> >> 0
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::309::root:: Executing
>>> >> >>> >>> >> command --> '/bin/rpm -q ovirt-engine-config'
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::335::root:: output =
>>> >> >>> >>> >> ovirt-engine-config-3.1.0-4.fc17.noarch
>>> >> >>> >>> >>
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::336::root:: stderr =
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::337::root:: retcode =
>>> >> >>> >>> >> 0
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::309::root:: Executing
>>> >> >>> >>> >> command --> '/bin/rpm -q ovirt-engine-genericapi'
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::335::root:: output =
>>> >> >>> >>> >> ovirt-engine-genericapi-3.1.0-4.fc17.noarch
>>> >> >>> >>> >>
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::336::root:: stderr =
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::337::root:: retcode =
>>> >> >>> >>> >> 0
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::309::root:: Executing
>>> >> >>> >>> >> command --> '/bin/rpm -q ovirt-engine-notification-service'
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::335::root:: output =
>>> >> >>> >>> >> ovirt-engine-notification-service-3.1.0-4.fc17.noarch
>>> >> >>> >>> >>
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::336::root:: stderr =
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::337::root:: retcode =
>>> >> >>> >>> >> 0
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::309::root:: Executing
>>> >> >>> >>> >> command --> '/bin/rpm -q ovirt-engine-restapi'
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::335::root:: output =
>>> >> >>> >>> >> ovirt-engine-restapi-3.1.0-4.fc17.noarch
>>> >> >>> >>> >>
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::336::root:: stderr =
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::337::root:: retcode =
>>> >> >>> >>> >> 0
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::309::root:: Executing
>>> >> >>> >>> >> command --> '/bin/rpm -q ovirt-engine-tools-common'
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::335::root:: output =
>>> >> >>> >>> >> ovirt-engine-tools-common-3.1.0-4.fc17.noarch
>>> >> >>> >>> >>
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::336::root:: stderr =
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::337::root:: retcode =
>>> >> >>> >>> >> 0
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::309::root:: Executing
>>> >> >>> >>> >> command --> '/bin/rpm -q ovirt-engine-userportal'
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::335::root:: output =
>>> >> >>> >>> >> ovirt-engine-userportal-3.1.0-4.fc17.noarch
>>> >> >>> >>> >>
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::336::root:: stderr =
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::337::root:: retcode =
>>> >> >>> >>> >> 0
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::309::root:: Executing
>>> >> >>> >>> >> command --> '/bin/rpm -q ovirt-engine-webadmin-portal'
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::335::root:: output =
>>> >> >>> >>> >> ovirt-engine-webadmin-portal-3.1.0-4.fc17.noarch
>>> >> >>> >>> >>
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::336::root:: stderr =
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::337::root:: retcode =
>>> >> >>> >>> >> 0
>>> >> >>> >>> >> 2013-03-24 12:04:27::DEBUG::common_utils::286::root:: cmd =
>>> >> >>> >>> >> /bin/rpm
>>> >> >>> >>> >> -q ovirt-engine ovirt-engine-backend ovirt-engine-config
>>> >> >>> >>> >> ovirt-engine-genericapi ovirt-engine-notification-service
>>> >> >>> >>> >> ovirt-engine-restapi ovirt-engine-tools-common
>>> >> >>> >>> >> ovirt-engine-userportal
>>> >> >>> >>> >> ovirt-engine-webadmin-portal >>
>>> >> >>> >>> >> /etc/yum/pluginconf.d/versionlock.list
>>> >> >>> >>> >> 2013-03-24 12:04:28::DEBUG::common_utils::291::root:: output =
>>> >> >>> >>> >> 2013-03-24 12:04:28::DEBUG::common_utils::292::root:: stderr =
>>> >> >>> >>> >> 2013-03-24 12:04:28::DEBUG::common_utils::293::root:: retcode =
>>> >> >>> >>> >> 0
>>> >> >>> >>> >> 2013-03-24 12:04:28::DEBUG::engine-upgrade::270::root:: Yum
>>> >> >>> >>> >> lock
>>> >> >>> >>> >> completed successfully
>>> >> >>> >>> >> 2013-03-24 12:04:28::DEBUG::engine-upgrade::320::root:: No
>>> >> >>> >>> >> packages
>>> >> >>> >>> >> marked for update
>>> >> >>> >>> >> 2013-03-24 12:04:28::DEBUG::engine-upgrade::324::root::
>>> >> >>> >>> >> Installed
>>> >> >>> >>> >> packages:
>>> >> >>> >>> >> 2013-03-24 12:04:28::DEBUG::engine-upgrade::325::root::
>>> >> >>> >>> >> ['ovirt-engine-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-engine-backend-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-engine-config-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-engine-dbscripts-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-engine-genericapi-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-engine-notification-service-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-engine-restapi-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-engine-setup-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-engine-tools-common-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-engine-userportal-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-engine-webadmin-portal-3.1.0-4.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-image-uploader-3.1.0-0.git9c42c8.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-iso-uploader-3.1.0-0.git1841d9.fc17.noarch',
>>> >> >>> >>> >> 'ovirt-log-collector-3.1.0-0.git10d719.fc17.noarch',
>>> >> >>> >>> >> 'vdsm-bootstrap-4.10.0-13.fc17.noarch']
>>> >> >>> >>> >> 2013-03-24 12:04:28::DEBUG::engine-upgrade::327::root:: Yum
>>> >> >>> >>> >> list
>>> >> >>> >>> >> updated completed successfully
>>> >> >>> >>> >> 2013-03-24 12:04:28::DEBUG::engine-upgrade::609::root:: No
>>> >> >>> >>> >> updates
>>> >> >>> >>> >> available
>>> >> >>> >>> >>
>>> >> >>> >>> >>
>>> >> >>> >>> >> Here's what's installed.
>>> >> >>> >>> >>
>>> >> >>> >>> >> [root at reliant yum.repos.d]# yum list installed | grep ovirt
>>> >> >>> >>> >> ovirt-engine.noarch 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-engine-backend.noarch 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-engine-cli.noarch 3.2.0.5-1.fc17
>>> >> >>> >>> >> @updates
>>> >> >>> >>> >> ovirt-engine-config.noarch 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-engine-dbscripts.noarch 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-engine-genericapi.noarch 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-engine-notification-service.noarch
>>> >> >>> >>> >> 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-engine-restapi.noarch 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-engine-sdk.noarch 3.2.0.2-1.fc17
>>> >> >>> >>> >> @updates
>>> >> >>> >>> >> ovirt-engine-setup.noarch 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-engine-tools-common.noarch 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-engine-userportal.noarch 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-engine-webadmin-portal.noarch 3.1.0-4.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-image-uploader.noarch 3.1.0-0.git9c42c8.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-iso-uploader.noarch 3.1.0-0.git1841d9.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-log-collector.noarch 3.1.0-0.git10d719.fc17
>>> >> >>> >>> >> @ovirt-stable
>>> >> >>> >>> >> ovirt-release-fedora.noarch 4-2
>>> >> >>> >>> >> @/ovirt-release-fedora.noarch
>>> >> >>> >>> >>
>>> >> >>> >>> >> On Sun, Apr 7, 2013 at 2:16 AM, Alon Bar-Lev
>>> >> >>> >>> >> <alonbl at redhat.com>
>>> >> >>> >>> >> wrote:
>>> >> >>> >>> >> > How exactly did you upgrade?
>>> >> >>> >>> >> >
>>> >> >>> >>> >> > Usually yum upgrade will not touch ovirt-engine packages as
>>> >> >>> >>> >> > it
>>> >> >>> >>> >> > is in
>>> >> >>> >>> >> > yum
>>> >> >>> >>> >> > version lock.
>>> >> >>> >>> >> > From which version to which version have you upgraded?
>>> >> >>> >>> >> > Have you run engine-upgrade utility?
>>> >> >>> >>> >> > If you did not, please run it.
>>> >> >>> >>> >> > If you did, please attach logs from
>>> >> >>> >>> >> > /var/log/ovirt-engine/ovirt-engine-upgrade*
>>> >> >>> >>> >> >
>>> >> >>> >>> >> > Thanks!
>>> >> >>> >>> >> >
>>> >> >>> >>> >> > ----- Original Message -----
>>> >> >>> >>> >> >> From: "Chris Smith" <whitehat237 at gmail.com>
>>> >> >>> >>> >> >> To: Users at ovirt.org
>>> >> >>> >>> >> >> Sent: Sunday, April 7, 2013 5:09:46 AM
>>> >> >>> >>> >> >> Subject: [Users] Certificates and PKI seem to be broken
>>> >> >>> >>> >> >> after
>>> >> >>> >>> >> >> yum
>>> >> >>> >>> >> >> update
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> I have lost the ability to manage the hosts or VM's using
>>> >> >>> >>> >> >> ovirt
>>> >> >>> >>> >> >> engine web interface after performing yum update on the
>>> >> >>> >>> >> >> ovirt-engine
>>> >> >>> >>> >> >> host, and on one Fedora 17 host. The data center is
>>> >> >>> >>> >> >> offline,
>>> >> >>> >>> >> >> and I
>>> >> >>> >>> >> >> can't place the hosts into maintenance mode. I don't think
>>> >> >>> >>> >> >> that
>>> >> >>> >>> >> >> there
>>> >> >>> >>> >> >> are any actions I can perform in the web interface at all.
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> From the logs it seems that PKI is broken between the engine
>>> >> >>> >>> >> >> and
>>> >> >>> >>> >> >> the
>>> >> >>> >>> >> >> hosts.
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> I am wondering how I can restore or re-generate all of the
>>> >> >>> >>> >> >> certificates and get the hosts communicating with the
>>> >> >>> >>> >> >> ovirt-engine
>>> >> >>> >>> >> >> again so that I can bring the data center back online.
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> I found this page which deals with changing the engine
>>> >> >>> >>> >> >> hostname,
>>> >> >>> >>> >> >> and
>>> >> >>> >>> >> >> thus re-creating the certificates and keystore on the
>>> >> >>> >>> >> >> ovirt-engine
>>> >> >>> >>> >> >> node, and was wondering if this could help. Could I follow
>>> >> >>> >>> >> >> this
>>> >> >>> >>> >> >> process but keep the same hostname for the ovirt-engine
>>> >> >>> >>> >> >> node?
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> http://wiki.ovirt.org/How_to_change_engine_host_name
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> Currently I have 3 VM's running on two hosts. The VM's are
>>> >> >>> >>> >> >> up,
>>> >> >>> >>> >> >> but
>>> >> >>> >>> >> >> I
>>> >> >>> >>> >> >> can't do anything with them in ovirt-engine.
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> Here's the latest activity from engine.log from the
>>> >> >>> >>> >> >> ovirt-engine
>>> >> >>> >>> >> >> node:
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> 2013-04-06 21:58:47,472 ERROR
>>> >> >>> >>> >> >> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
>>> >> >>> >>> >> >> (QuartzScheduler_Worker-61) Failed to
>>> >> >>> >>> >> >> decryptjava.io.FileNotFoundException:
>>> >> >>> >>> >> >> /etc/pki/ovirt-engine/.keystore
>>> >> >>> >>> >> >> (Permission denied)
>>> >> >>> >>> >> >> 2013-04-06 21:58:47,478 ERROR
>>> >> >>> >>> >> >> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
>>> >> >>> >>> >> >> (QuartzScheduler_Worker-62) Can't load keystore from file
>>> >> >>> >>> >> >> "/etc/pki/ovirt-engine/.keystore".:
>>> >> >>> >>> >> >> java.io.FileNotFoundException:
>>> >> >>> >>> >> >> /etc/pki/ovirt-engine/.keystore (Permission denied)
>>> >> >>> >>> >> >> at java.io.FileInputStream.open(Native Method)
>>> >> >>> >>> >> >> [rt.jar:1.7.0_09-icedtea]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> java.io.FileInputStream.<init>(FileInputStream.java:138)
>>> >> >>> >>> >> >> [rt.jar:1.7.0_09-icedtea]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.engineencryptutils.EncryptionUtils.getKeyStore(EncryptionUtils.java:214)
>>> >> >>> >>> >> >> [engine-encryptutils.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.engineencryptutils.EncryptionUtils.decrypt(EncryptionUtils.java:139)
>>> >> >>> >>> >> >> [engine-encryptutils.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dao.VdsStaticDAODbFacadeImpl.decryptPassword(VdsStaticDAODbFacadeImpl.java:139)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dao.VdsDAODbFacadeImpl$VdsRowMapper.mapRow(VdsDAODbFacadeImpl.java:253)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dao.VdsDAODbFacadeImpl$VdsRowMapper.mapRow(VdsDAODbFacadeImpl.java:169)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.springframework.jdbc.core.RowMapperResultSetExtractor.extractData(RowMapperResultSetExtractor.java:92)
>>> >> >>> >>> >> >> [spring-jdbc-2.5.6.SEC02.jar:2.5.6.SEC02]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.springframework.jdbc.core.JdbcTemplate$1.doInPreparedStatement(JdbcTemplate.java:653)
>>> >> >>> >>> >> >> [spring-jdbc-2.5.6.SEC02.jar:2.5.6.SEC02]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:591)
>>> >> >>> >>> >> >> [spring-jdbc-2.5.6.SEC02.jar:2.5.6.SEC02]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:641)
>>> >> >>> >>> >> >> [spring-jdbc-2.5.6.SEC02.jar:2.5.6.SEC02]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:670)
>>> >> >>> >>> >> >> [spring-jdbc-2.5.6.SEC02.jar:2.5.6.SEC02]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:702)
>>> >> >>> >>> >> >> [spring-jdbc-2.5.6.SEC02.jar:2.5.6.SEC02]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dal.dbbroker.PostgresDbEngineDialect$PostgresSimpleJdbcCall.executeCallInternal(PostgresDbEngineDialect.java:155)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dal.dbbroker.PostgresDbEngineDialect$PostgresSimpleJdbcCall.doExecute(PostgresDbEngineDialect.java:121)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.springframework.jdbc.core.simple.SimpleJdbcCall.execute(SimpleJdbcCall.java:164)
>>> >> >>> >>> >> >> [spring-jdbc-2.5.6.SEC02.jar:2.5.6.SEC02]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeImpl(SimpleJdbcCallsHandler.java:124)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeReadAndReturnMap(SimpleJdbcCallsHandler.java:75)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeReadList(SimpleJdbcCallsHandler.java:66)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dal.dbbroker.SimpleJdbcCallsHandler.executeRead(SimpleJdbcCallsHandler.java:58)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dao.VdsDAODbFacadeImpl.get(VdsDAODbFacadeImpl.java:36)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.dao.VdsDAODbFacadeImpl.get(VdsDAODbFacadeImpl.java:31)
>>> >> >>> >>> >> >> [engine-dal.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.vdsbroker.VdsManager$1.runInTransaction(VdsManager.java:219)
>>> >> >>> >>> >> >> [engine-vdsbroker.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInSuppressed(TransactionSupport.java:168)
>>> >> >>> >>> >> >> [engine-utils.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.utils.transaction.TransactionSupport.executeInScope(TransactionSupport.java:107)
>>> >> >>> >>> >> >> [engine-utils.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.vdsbroker.VdsManager.OnTimer(VdsManager.java:215)
>>> >> >>> >>> >> >> [engine-vdsbroker.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> sun.reflect.GeneratedMethodAccessor13.invoke(Unknown
>>> >> >>> >>> >> >> Source) [:1.7.0_09-icedtea]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
>>> >> >>> >>> >> >> [rt.jar:1.7.0_09-icedtea]
>>> >> >>> >>> >> >> at java.lang.reflect.Method.invoke(Method.java:601)
>>> >> >>> >>> >> >> [rt.jar:1.7.0_09-icedtea]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.ovirt.engine.core.utils.timer.JobWrapper.execute(JobWrapper.java:64)
>>> >> >>> >>> >> >> [engine-scheduler.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.quartz.core.JobRunShell.run(JobRunShell.java:213)
>>> >> >>> >>> >> >> [quartz.jar:]
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:557)
>>> >> >>> >>> >> >> [quartz.jar:]
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> 2013-04-06 21:58:47,576 ERROR
>>> >> >>> >>> >> >> [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
>>> >> >>> >>> >> >> (QuartzScheduler_Worker-61) XML RPC error in command
>>> >> >>> >>> >> >> GetCapabilitiesVDS ( Vds: defiant ), the error was:
>>> >> >>> >>> >> >> java.util.concurrent.ExecutionException:
>>> >> >>> >>> >> >> java.lang.reflect.InvocationTargetException,
>>> >> >>> >>> >> >> SSLPeerUnverifiedException: peer not authenticated
>>> >> >>> >>> >> >> 2013-04-06 21:58:47,606 ERROR
>>> >> >>> >>> >> >> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
>>> >> >>> >>> >> >> (QuartzScheduler_Worker-62) Failed to
>>> >> >>> >>> >> >> decryptjava.io.FileNotFoundException:
>>> >> >>> >>> >> >> /etc/pki/ovirt-engine/.keystore
>>> >> >>> >>> >> >> (Permission denied)
>>> >> >>> >>> >> >> 2013-04-06 21:58:47,671 ERROR
>>> >> >>> >>> >> >> [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerCommand]
>>> >> >>> >>> >> >> (QuartzScheduler_Worker-62) XML RPC error in command
>>> >> >>> >>> >> >> GetCapabilitiesVDS ( Vds: transporter ), the error was:
>>> >> >>> >>> >> >> java.util.concurrent.ExecutionException:
>>> >> >>> >>> >> >> java.lang.reflect.InvocationTargetException,
>>> >> >>> >>> >> >> SSLPeerUnverifiedException: peer not authenticated
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> Here's the message I seem to get over and over on the fedora
>>> >> >>> >>> >> >> 17
>>> >> >>> >>> >> >> host in
>>> >> >>> >>> >> >> vdsm.log
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> SSLError: [Errno 1] _ssl.c:504: error:14094416:SSL
>>> >> >>> >>> >> >> routines:SSL3_READ_BYTES:sslv3 alert certificate unknown
>>> >> >>> >>> >> >> Thread-562520::ERROR::2013-04-06
>>> >> >>> >>> >> >> 22:08:44,268::SecureXMLRPCServer::73::root::(handle_error)
>>> >> >>> >>> >> >> client
>>> >> >>> >>> >> >> ('172.16.23.8', 36127)
>>> >> >>> >>> >> >> Traceback (most recent call last):
>>> >> >>> >>> >> >> File "/usr/lib64/python2.7/SocketServer.py", line 582, in
>>> >> >>> >>> >> >> process_request_thread
>>> >> >>> >>> >> >> self.finish_request(request, client_address)
>>> >> >>> >>> >> >> File
>>> >> >>> >>> >> >> "/usr/lib/python2.7/site-packages/vdsm/SecureXMLRPCServer.py",
>>> >> >>> >>> >> >> line 66, in finish_request
>>> >> >>> >>> >> >> request.do_handshake()
>>> >> >>> >>> >> >> File "/usr/lib64/python2.7/ssl.py", line 305, in
>>> >> >>> >>> >> >> do_handshake
>>> >> >>> >>> >> >> self._sslobj.do_handshake()
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> I'm also wondering about the permission denied on the
>>> >> >>> >>> >> >> .keystore
>>> >> >>> >>> >> >> directory. What should the permissions be? Here's what
>>> >> >>> >>> >> >> they
>>> >> >>> >>> >> >> are
>>> >> >>> >>> >> >> currently.
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> [root at reliant pki]# ls -ldZ /etc/pki/ovirt-engine/.keystore
>>> >> >>> >>> >> >> -rwxr-x---. root root unconfined_u:object_r:cert_t:s0
>>> >> >>> >>> >> >> /etc/pki/ovirt-engine/.keystore
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> I also seem to have a backup of the ovirt-engine directory
>>> >> >>> >>> >> >> at
>>> >> >>> >>> >> >> the
>>> >> >>> >>> >> >> time
>>> >> >>> >>> >> >> the update was performed, but replacing ovirt-engine with
>>> >> >>> >>> >> >> the
>>> >> >>> >>> >> >> backup
>>> >> >>> >>> >> >> does no good.
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> I appreciate any assistance, and please let me know what
>>> >> >>> >>> >> >> other
>>> >> >>> >>> >> >> information I can post to help with this.
>>> >> >>> >>> >> >>
>>> >> >>> >>> >> >> Thanks
>>> >> >>> >>> >> >> _______________________________________________
>>> >> >>> >>> >> >> Users mailing list
>>> >> >>> >>> >> >> Users at ovirt.org
>>> >> >>> >>> >> >> http://lists.ovirt.org/mailman/listinfo/users
>>> >> >>> >>> >> >>
>>> >> >>> >>> >>
>>> >> >>> >>>
>>> >> >>>
>>> >>
>>>
More information about the Users
mailing list