[Users] Unable to add host in a development setup - "Host kernelpanic.home installation failed. Failed to decode own public key from store 'keys/engine.p12' using alias '1'."

Mon Apr 29 05:28:47 UTC 2013

Thank you very much for your prompt response. However, according to "git
rebase" (after "git fetch") there is no new change

[wil at bufferoverflow repository]$ git fetch
https://github.com/alonbl/ovirt-engine.git otopi
>From https://github.com/alonbl/ovirt-engine
 * branch            otopi      -> FETCH_HEAD
[wil at bufferoverflow repository]$ git rebase --merge FETCH_HEAD
*Current branch otopi is up to date.*
*
*
The latest change I see in "git log" is

[wil at bufferoverflow repository]$ git show HEAD
commit 99d95891ab0e814159a463d246543b08e41c746d
Author: Alon Bar-Lev <alonbl at redhat.com>
Date:   Thu Apr 25 12:39:50 2013 +0300

    packaging: engine-setup re-write using otopi

    Change-Id: I4d5e3ac7927802326e324c9b98ada75b421638aa
    Signed-off-by: Alon Bar-Lev <alonbl at redhat.com>
    Signed-off-by: Sandro Bonazzola <sbonazzo at redhat.com>
    Signed-off-by: Alex Lourie <alourie at redhat.com>

If you don't wish to push the change yet, you can send a patch and I will
apply it.

On Mon, Apr 29, 2013 at 1:04 AM, Alon Bar-Lev <alonbl at redhat.com> wrote:

>
>
> ----- Original Message -----
> > From: "Limor Gavish" <lgavish at gmail.com>
> > To: "Alon Bar-Lev" <alonbl at redhat.com>
> > Cc: "Yuval M" <yuvalme at gmail.com>, users at ovirt.org, "Nezer Zaidenberg" <
> nzaidenberg at mac.com>, "Vered Volansky"
> > <vered at redhat.com>
> > Sent: Sunday, April 28, 2013 10:56:45 PM
> > Subject: Re: [Users] Unable to add host in a development setup - "Host
> kernelpanic.home installation failed. Failed
> > to decode own public key from store 'keys/engine.p12' using alias '1'."
> >
> > Hi,
> >
> > Thank you very much for your help but I do not succeed to start the
> engine
> > after compiling your version.
> >
> > I switched to the otopi branch like you said.
> > git fetch https://github.com/alonbl/ovirt-engine.git otopi
> > git checkout -b otopi FETCH_HEAD
> >
> > I followed the instructions in
> > https://github.com/alonbl/ovirt-engine/blob/otopi/README.developer
> > *So here are the last 3 commands I used:*
> > make clean install-dev PREFIX=$HOME/ovirt-engine
> > $HOME/ovirt-engine/bin/engine-setup-2
> > --jboss-home=$HOME/ovirt-engine/jboss-as-7.1.1.Final
> > $HOME/ovirt-engine/share/ovirt-engine/services/ovirt-engine.py start
> >
> > However, the last command
> > ($HOME/ovirt-engine/share/ovirt-engine/services/ovirt-engine.py start)
> > hangs.
>
> This is expected... it is the service running, Ctrl-C to terminate.
>
> > *In server.log I see the following error:*
> > 2013-04-28 22:13:40,203 ERROR [org.jboss.as] (MSC service thread 1-3)
> > JBAS015875: JBoss AS 7.1.1.Final "Brontes" started (with errors) in
> 2788ms
> > - Started 504 of 5     40 services (1 services failed or missing
> > dependencies, 34 services are passive or on-demand)
> > *In engine.log I see the following error:*
> > 2013-04-28 22:13:40,082 ERROR
> > [org.ovirt.engine.core.utils.ErrorTranslatorImpl] (MSC service thread
> 1-4)
> > File: bundles/VdsmErrors could not be loaded: java.util.Mis
> >  singResourceException: Can't find bundle for base name
> bundles/VdsmErrors,
> > locale en_US
> >
> > Full logs are attached.
>
> The problem is that for some reason the PREFIX is not taken into account.
>
> Related errors:
> 2013-04-28 19:57:46,468 WARN  [org.ovirt.engine.core.utils.LocalConfig]
> (MSC service thread 1-3) The file
> "/usr/share/ovirt-engine/conf/engine.conf.defaults" doesn't exist or isn't
> readable. Will return an empty set of properties.
> 2013-04-28 19:57:46,468 WARN  [org.ovirt.engine.core.utils.LocalConfig]
> (MSC service thread 1-3) The file "/etc/ovirt-engine/engine.conf" doesn't
> exist or isn't readable. Will return an empty set of properties.
>
> It can be due to previous make execution without PREFIX.
> I've committed a change to Makefile to force regenerate the file locations
> when using install-dev.
> Can you please give it a try?
>
> Thanks!
>
> > Thanks,
> > Limor on behalf of Yuval
> >
> >
> > On Sun, Apr 28, 2013 at 2:51 PM, Alon Bar-Lev <alonbl at redhat.com> wrote:
> >
> > >
> > > Maybe someone can help you in this.
> > >
> > > I prefer people install development mode and use fully functional
> product
> > > within their development environment.
> > >
> > > Alon
> > >
> > > ----- Original Message -----
> > > > From: "Yuval M" <yuvalme at gmail.com>
> > > > To: "Alon Bar-Lev" <alonbl at redhat.com>
> > > > Cc: users at ovirt.org, "Nezer Zaidenberg" <nzaidenberg at mac.com>,
> "Limor
> > > Gavish" <lgavish at gmail.com>, "Vered Volansky"
> > > > <vered at redhat.com>
> > > > Sent: Sunday, April 28, 2013 12:45:33 PM
> > > > Subject: Re: [Users] Unable to add host in a development setup -
> "Host
> > > kernelpanic.home installation failed. Failed
> > > > to decode own public key from store 'keys/engine.p12' using alias
> '1'."
> > > >
> > > > But is there an option to just manually install the new host?
> > > >
> > > > Yuval
> > > >
> > > >
> > > > On Sun, Apr 28, 2013 at 11:46 AM, Alon Bar-Lev <alonbl at redhat.com>
> > > wrote:
> > > >
> > > > >
> > > > > Development mode installation is not yet supported to perform
> > > host-deploy.
> > > > > There is ongoing work for fully functional development environment.
> > > > > You can test this if you like before it is merged upstream.
> > > > > Sources available here[1], documentation is here[2].
> > > > >
> > > > > [1] https://github.com/alonbl/ovirt-engine/tree/otopi
> > > > > [2]
> https://github.com/alonbl/ovirt-engine/blob/otopi/README.developer
> > > > >
> > > > > ----- Original Message -----
> > > > > > From: "Yuval M" <yuvalme at gmail.com>
> > > > > > To: users at ovirt.org, "Nezer Zaidenberg" <nzaidenberg at mac.com>,
> > > "Limor
> > > > > Gavish" <lgavish at gmail.com>
> > > > > > Sent: Saturday, April 27, 2013 5:22:59 PM
> > > > > > Subject: [Users] Unable to add host in a development setup -
> "Host
> > > > > kernelpanic.home installation failed. Failed to
> > > > > > decode own public key from store 'keys/engine.p12' using alias
> '1'."
> > > > > >
> > > > > > I'm getting the aforementioned error message when trying to
> > > reinstall a
> > > > > host
> > > > > > that failed to be added to the cluster.
> > > > > >
> > > > > > in the engine log I have:
> > > > > >
> > > > > > 2013-04-27 16:29:58,249 ERROR
> > > > > [org.ovirt.engine.core.bll.InstallVdsCommand]
> > > > > > (pool-3-thread-49) [3070670b] Host installation failed for host
> > > > > > cf09fb25-b8a4-4068-a
> > > > > > 3c8-9869d0ba4ff9, kernelpanic.home.: java.lang.RuntimeException:
> > > Failed
> > > > > to
> > > > > > decode own public key from store 'keys/engine.p12' using alias
> '1'
> > > > > > at
> > > > > >
> > > > >
> > >
> org.ovirt.engine.core.bll.VdsDeploy._getEngineSSHPublicKey(VdsDeploy.java:227)
> > > > > > [bll.jar:]
> > > > > > at
> org.ovirt.engine.core.bll.VdsDeploy.access$400(VdsDeploy.java:71)
> > > > > > [bll.jar:]
> > > > > > at org.ovirt.engine.core.bll.VdsDeploy$9.call(VdsDeploy.java:334)
> > > > > [bll.jar:]
> > > > > > at
> > > > > >
> > > > >
> > >
> org.ovirt.engine.core.bll.VdsDeploy._nextCustomizationEntry(VdsDeploy.java:476)
> > > > > > [bll.jar:]
> > > > > > at
> > > org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:687)
> > > > > > [bll.jar:]
> > > > > > at
> org.ovirt.engine.core.bll.VdsDeploy.access$1400(VdsDeploy.java:71)
> > > > > > [bll.jar:]
> > > > > > at org.ovirt.engine.core.bll.VdsDeploy$32.run(VdsDeploy.java:779)
> > > > > [bll.jar:]
> > > > > > at java.lang.Thread.run(Thread.java:722)
> [rt.jar:1.7.0_09-icedtea]
> > > > > > Caused by: java.io.FileNotFoundException: keys/engine.p12 (No
> such
> > > file
> > > > > or
> > > > > > directory)
> > > > > > at java.io.FileInputStream.open(Native Method)
> > > [rt.jar:1.7.0_09-icedtea]
> > > > > > at java.io.FileInputStream.<init>(FileInputStream.java:138)
> > > > > > [rt.jar:1.7.0_09-icedtea]
> > > > > > at java.io.FileInputStream.<init>(FileInputStream.java:97)
> > > > > > [rt.jar:1.7.0_09-icedtea]
> > > > > > at
> > > > > >
> > > > >
> > >
> org.ovirt.engine.core.bll.VdsDeploy._getEngineSSHPublicKey(VdsDeploy.java:206)
> > > > > > [bll.jar:]
> > > > > > ... 7 more
> > > > > >
> > > > > >
> > > > > >
> > > > > > My setup has an all-in-one node with the engine installed from
> > > sources,
> > > > > >
> > > > > > and I'm attempting to add a seconds host (Fedora 18, vdsm from
> yum,
> > > > > nothing
> > > > > > fancy).
> > > > > >
> > > > > > I installed vdsm (yum install vdsm), and disabled SSL as
> instructed
> > > in:
> > > > > > http://www.ovirt.org/OVirt_-_disable_SSL_in_VDSM
> > > > > >
> > > > > > I read here that the development setup (i.e engine installed from
> > > > > sources)
> > > > > > does not support automatic deployment:
> > > > > > http://www.mail-archive.com/users@ovirt.org/msg07608.html
> > > > > >
> > > > > > Is this still the case?
> > > > > > If so, how do I deploy an additional host in such a setup?
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > Yuval Meir
> > > > > >
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > Users mailing list
> > > > > > Users at ovirt.org
> > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > > >
> > > > >
> > > >
> > >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130429/5d07319e/attachment-0001.html>