[Users] 3 IDE disks : Duplicate ID error

[Nicolas Ecarnot]

Le 29/11/2013 13:36, Dan Kenigsberg a écrit :
>> Do you mean the xml that one can see in the vdsm.log?
>
> Actually, I've meant everything: from Engine's parameters to the
> vmCreate command, down to the error from libvirt. The domxml blow
> suggests that the error might be even further below, since I do not
> see an address collision here.
>
>> <disk device="cdrom" snapshot="no" type="file"> <address bus="1"
>> controller="0" target="0" type="drive" unit="0"/> <target bus="ide"
>> dev="hdc"/> </disk> <disk device="disk" snapshot="no"
>> type="block"> <address bus="0" controller="0" target="0"
>> type="drive" unit="0"/> <target bus="ide" dev="hda"/> </disk> <disk
>> device="disk" snapshot="no" type="block"> <address bus="1"
>> controller="0" target="0" type="drive" unit="1"/> <target bus="ide"
>> dev="hdb"/> </disk> <disk device="disk" snapshot="no"
>> type="block"> <address bus="0" controller="0" target="0"
>> type="drive" unit="1"/> <target bus="ide" dev="hdd"/> </disk>
>
> Could you provide the vmCreate line from vdsm.log, and also the part
> of libvirtd.log since that domxml gets in until the error is spewed
> out?
>

Wow, this is weird!
After some shutdown/reboot (I have other things to do with this VM), I 
CAN NOT reproduce the issue.
I swear I have not changed the disk setup, neither added a component or 
what else.
What I get now is the VM up and running with 3 IDE disks, a state I 
couldn't reach so far. I don't know what to conclude?

-- 
Nicolas Ecarnot