[Users] ovirtmgmt not installed

Wed Dec 4 06:22:05 UTC 2013

At the end, I could not make an F19 Fedora host work against a 3.3 engine. I suggest someone from the eng team has a look at it. some stuff just does not work there.

Therefore, I downgraded the fedora host to F18. On the engine side, I got the following error message :

Host lab2 is compatible with versions (3.0,3.1,3.2) and cannot join Cluster Default which is set to version 3.3.

Don't know what is to be set....

Anyway, I created a 3.2 cluster and installed the host into it. Seems to work (the host is up).

Thanks again for support. 

Pascal Jakobi
116 rue de Stalingrad
93100 Montreuil, France
Tel : + 33 6 87 47 58 19
@ : pjakobi at yahoo.fr

Le Mardi 3 décembre 2013 14h04, Pascal Jakobi <pjakobi at yahoo.fr> a écrit :

Will do within a couple of hours.
Many, many thanks

Pascal Jakobi
116 rue de Stalingrad
93100 Montreuil, France
Tel : + 33 6 87 47 58 19
@ : pjakobi at yahoo.fr

Le Mardi 3 décembre 2013 13h43, Antoni Segura Puimedon <asegurap at redhat.com> a écrit :

Hi Pacal,

Would you mind joining #ovirt at irc.oftc.net and pinging apuimedo?
I have some questions that could be faster solved online.

Best,

Antoni

----- Original Message -----
> From: "Pascal Jakobi" <pjakobi at yahoo.fr>
> To: "Pascal Jakobi" <pascal.jakobi at gmail.com>, "Moti Asayag" <masayag at redhat.com>
> Cc: users at ovirt.org
> Sent: Tuesday, December 3, 2013 1:11:36 PM
> Subject: Re: [Users] ovirtmgmt not installed
> 
> Still the same, even with networking working like a charm...
> Any idea ?
> 
> [root at lab2 vdsm]# vdsClient -s 0 getVdsCaps
> HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
> 'iqn.1994-05.com.redhat:a0bc8a5f9a5d'}]}
> ISCSIInitiatorName = 'iqn.1994-05.com.redhat:a0bc8a5f9a5d'
> bondings = {'bond0': {'addr': '',
> 'cfg': {},
> 'hwaddr': '96:9d:8f:27:e1:8f',
> 'ipv6addrs': [],
> 'mtu': '1500',
> 'netmask': '',
> 'slaves': []}}
> bridges = {}
> clusterLevels = ['3.0', '3.1', '3.2', '3.3']
> cpuCores = '4'
> cpuFlags =
> 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge'
> cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz'
> cpuSockets = '1'
> cpuSpeed = '3708.000'
> cpuThreads = '8'
> emulatedMachines = ['pc',
> 'q35',
> 'isapc',
> 'pc-0.10',
> 'pc-0.11',
> 'pc-0.12',
> 'pc-0.13',
> 'pc-0.14',
> 'pc-0.15',
> 'pc-1.0',
> 'pc-1.1',
> 'pc-1.2',
> 'pc-1.3',
> 'none']
> guestOverhead = '65'
> hooks = {}
> kvmEnabled = 'true'
> lastClient = '192.168.1.41'
> lastClientIface = 'em1'
> management_ip = '0.0.0.0'
> memSize = '16001'
> netConfigDirty = 'True'
> networks = {}
> nics = {'em1': {'addr': '192.168.1.42',
> 'cfg': {},
> 'hwaddr': '00:1a:6b:51:de:b4',
> 'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'],
> 'mtu': '1500',
> 'netmask': '255.255.255.0',
> 'speed': 100}}
> operatingSystem = {'name': 'Fedora', 'release': '4', 'version': '19'}
> packages2 = {'kernel': {'buildtime': 1384978944.0,
> 'release': '200.fc19.x86_64',
> 'version': '3.11.9'},
> 'libvirt': {'buildtime': 1384730741,
> 'release': '2.fc19',
> 'version': '1.0.5.7'},
> 'mom': {'buildtime': 1375215820, 'release': '3.fc19', 'version': '0.3.2'},
> 'qemu-img': {'buildtime': 1383700301,
> 'release': '13.fc19',
> 'version': '1.4.2'},
> 'qemu-kvm': {'buildtime':
 1383700301,
> 'release': '13.fc19',
> 'version': '1.4.2'},
> 'spice-server': {'buildtime': 1383130020,
> 'release': '3.fc19',
> 'version': '0.12.4'},
> 'vdsm': {'buildtime': 1384274283, 'release': '11.fc19', 'version': '4.13.0'}}
> reservedMem = '321'
> software_revision = '11'
> software_version = '4.13'
> supportedENGINEs = ['3.0', '3.1', '3.2', '3.3']
> supportedProtocols = ['2.2', '2.3']
> uuid = '0A583269-811F-E211-AA06-001A6B51DEB4'
> version_name = 'Snow Man'
> vlans = {}
> vmTypes = ['kvm']
> [root at lab2 vdsm]#
> 
> 
>
 Pascal Jakobi
> 116 rue de Stalingrad
> 93100 Montreuil, France
> Tel : + 33 6 87 47 58 19
> @ : pjakobi at yahoo.fr
> 
> 
> Le Lundi 2 décembre 2013 10h31, Pascal Jakobi <pascal.jakobi at gmail.com> a
> écrit :
> As a matter of fact, when I installed F19, it created an eno1 device, aliased
> to em1. Don't know why, yet.
> Even adding a "GATEWAY" clause in /etc/sysconfig/network does not seem to
> change the problem....
> 
> Will check how to change the device name.
> 
> 
> 2013/12/1 Moti Asayag < masayag at redhat.com >
> 
> 
> Hi Pascal,
> 
> ----- Original Message -----
> > From: "Pascal Jakobi" < pascal.jakobi at gmail.com >
> > To: "Mike Kolesnik" < mkolesni at redhat.com >
> > Cc: users at ovirt.org , masayag at redhat.com
> > Sent: Sunday, December 1, 2013 10:58:40
 AM
> > Subject: Re: ovirtmgmt not installed
> > 
> > Mike
> > 
> > Here you go. However, please note that I must investigate the connection
> > issue that Alon saw. will do it tomorrow.
> > Many thanks to you folks.
> > P
> 
> According to the output of 'nics' element, the 'em1' device is missing his
> default gateway entry under the 'cfg' element.
> 
> One reason for that can be there is no
> '/etc/sysconfig/network-scripts/ifcfg-em1'
> file and vdsm fails to obtain the default gateway for it.
> 
> Could you create this file by your own and retry installing the host ?
> After creating the file
 (make sure it contains NM_CONTROLLED=no), restart the
> network service
> and run 'vdsClient -s 0 getVdsCaps' to make sure 'em1' output contains the
> data its 'cfg' sub-
> element.
> 
> > 
> > [root at lab2 ~]# vdsClient -s 0 getVdsCaps
> > HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
> > 'iqn.1994-05.com.redhat:eea1322229a8'}]}
> > ISCSIInitiatorName = 'iqn.1994-05.com.redhat:eea1322229a8'
> > bondings = {'bond0': {'addr': '',
> > 'cfg': {},
> > 'hwaddr': 'fa:7e:79:56:5a:c2',
> > 'ipv6addrs': [],
> > 'mtu': '1500',
> > 'netmask': '',
> > 'slaves': []}}
> > bridges = {}
> > clusterLevels = ['3.0', '3.1', '3.2', '3.3']
> > cpuCores = '4'
> > cpuFlags =
> > 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge'
> > cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz'
> > cpuSockets = '1'
> > cpuSpeed = '3744.000'
> > cpuThreads = '8'
> > emulatedMachines = ['pc',
> > 'q35',
> > 'isapc',
> > 'pc-0.10',
> > 'pc-0.11',
> > 'pc-0.12',
> > 'pc-0.13',
> > 'pc-0.14',
> > 'pc-0.15',
> > 'pc-1.0',
> > 'pc-1.1',
> > 'pc-1.2',
> > 'pc-1.3',
> > 'none']
> > guestOverhead = '65'
> > hooks = {}
> > kvmEnabled = 'false'
> > lastClient = '192.168.1.41'
> > lastClientIface = 'em1'
> > management_ip = '0.0.0.0'
> > memSize = '16001'
> >
 netConfigDirty = 'False'
> > networks = {}
> > nics = {'em1': {'addr': '192.168.1.42',
> > 'cfg': {},
> > 'hwaddr': '00:1a:6b:51:de:b4',
> > 'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'],
> > 'mtu': '1500',
> > 'netmask': '255.255.255.0',
> > 'speed': 100}}
> > operatingSystem = {'name': 'Fedora', 'release': '2', 'version': '19'}
> > packages2 = {'kernel': {'buildtime': 1384978944.0,
> > 'release': '200.fc19.x86_64',
> > 'version': '3.11.9'},
> > 'libvirt': {'buildtime': 1384730741,
> > 'release': '2.fc19',
> > 'version': '1.0.5.7'},
> > 'mom': {'buildtime': 1375215820, 'release': '3.fc19',
> > 'version': '0.3.2'},
> > 'qemu-img': {'buildtime': 1383700301,
> > 'release': '13.fc19',
> > 'version': '1.4.2'},
> > 'qemu-kvm': {'buildtime': 1383700301,
> > 'release': '13.fc19',
> > 'version': '1.4.2'},
> > 'spice-server': {'buildtime': 1383130020,
> > 'release': '3.fc19',
> > 'version': '0.12.4'},
> > 'vdsm': {'buildtime': 1384274283, 'release': '11.fc19',
> > 'version': '4.13.0'}}
> > reservedMem = '321'
> > software_revision = '11'
> > software_version = '4.13'
> > supportedENGINEs = ['3.0', '3.1', '3.2', '3.3']
> > supportedProtocols = ['2.2', '2.3']
> >
 uuid = '0A583269-811F-E211-AA06-001A6B51DEB4'
> > version_name = 'Snow Man'
> > vlans = {}
> > vmTypes = ['kvm']
> > 
> > 
> > 
> > 2013/12/1 Mike Kolesnik < mkolesni at redhat.com >
> > 
> > > ------------------------------
> > > 
> > > *Hi there *
> > > 
> > > 
> > > Hi Pascal,
> > > 
> > > 
> > > 
> > > 
> > > *I installed a console on F19, then a F19 host (time 11:09 today).*
> > > 
> > > *Everything works fine, apart from the installation of the mgmt network
> > > at
> > > the end. *
> > > *Can someone tell me what's going wrong ?*
> > > 
> > > 
> > > Can you please send the output of vdsCaps from the host (vdsClient -s 0
> > > getVdsCaps)?
> > > 
> > > 
> > > *Thxs in advance*
> > > 
> > > *Pascal*
> > > 
> > > 
> > > 
> > 
> > 
> > --
> > *Pascal Jakobi*
> > 116 rue de Stalingrad
> > 93100 Montreuil, France
> > 
> > * +33 6 87 47 58 19 * Pascal.Jakobi at gmail.com
> > 
> 
> 
> 
> --
> Pascal Jakobi
> 116 rue de Stalingrad
> 93100 Montreuil, France
> +33 6 87 47 58 19
> Pascal.Jakobi at gmail.com
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

> 
> 
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20131204/2c62ecf2/attachment-0001.html>