[Users] Adding new disk to Ovort node
Fabian Deutsch
fabiand at redhat.com
Wed Dec 18 11:46:04 UTC 2013
Am Mittwoch, den 18.12.2013, 13:26 +0200 schrieb Gabi C:
> Update on Glusterfs issue
>
>
> I manage to recover lost volume after recretaing the same volume name
> with same bricks, whisch raised an error message, resolved by, on both
> nodes:
>
> setfattr -x trusted.glusterfs.volume-id $brick_path
> setfattr -x trusted.gfid $brick_path
Hey,
good that you could recover them.
Could you please provide $brick_path and getfattr -d $brick_path
The question is if and/or why the fattrs are not stored.
- fabian
>
>
>
> On Wed, Dec 18, 2013 at 12:12 PM, Gabi C <gabicr at gmail.com> wrote:
> node 1:
>
> [root at virtual5 admin]# cat /config/files
> /etc/fstab
> /etc/shadow
> /etc/default/ovirt
> /etc/ssh/ssh_host_key
> /etc/ssh/ssh_host_key.pub
> /etc/ssh/ssh_host_dsa_key
> /etc/ssh/ssh_host_dsa_key.pub
> /etc/ssh/ssh_host_rsa_key
> /etc/ssh/ssh_host_rsa_key.pub
> /etc/rsyslog.conf
> /etc/libvirt/libvirtd.conf
> /etc/libvirt/passwd.db
> /etc/passwd
> /etc/sysconfig/network
> /etc/collectd.conf
> /etc/libvirt/qemu/networks
> /etc/ssh/sshd_config
> /etc/pki
> /etc/logrotate.d/ovirt-node
> /var/lib/random-seed
> /etc/iscsi/initiatorname.iscsi
> /etc/libvirt/qemu.conf
> /etc/sysconfig/libvirtd
> /etc/logrotate.d/libvirtd
> /etc/multipath.conf
> /etc/hosts
> /etc/sysconfig/network-scripts/ifcfg-enp3s0
> /etc/sysconfig/network-scripts/ifcfg-lo
> /etc/ntp.conf
> /etc/shadow
> /etc/vdsm-reg/vdsm-reg.conf
> /etc/shadow
> /etc/shadow
> /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
> /etc/sysconfig/network-scripts/route-ovirtmgmt
> /etc/sysconfig/network-scripts/rule-ovirtmgmt
> /root/.ssh/authorized_keys
> /etc/vdsm/vdsm.id
> /etc/udev/rules.d/12-ovirt-iosched.rules
> /etc/vdsm/vdsm.conf
> /etc/sysconfig/iptables
> /etc/resolv.conf
> /etc/sysconfig/network-scripts/ifcfg-VPO_IPPROXY
> /etc/sysconfig/network-scripts/ifcfg-enp6s0
> /etc/sysconfig/network-scripts/ifcfg-enp6s0.50
> /etc/glusterfs/glusterd.vol
> /etc/selinux/config
>
>
>
>
>
>
>
>
> node 2:
>
>
> [root at virtual4 ~]# cat /config/files
> /etc/fstab
> /etc/shadow
> /etc/default/ovirt
> /etc/ssh/ssh_host_key
> /etc/ssh/ssh_host_key.pub
> /etc/ssh/ssh_host_dsa_key
> /etc/ssh/ssh_host_dsa_key.pub
> /etc/ssh/ssh_host_rsa_key
> /etc/ssh/ssh_host_rsa_key.pub
> /etc/rsyslog.conf
> /etc/libvirt/libvirtd.conf
> /etc/libvirt/passwd.db
> /etc/passwd
> /etc/sysconfig/network
> /etc/collectd.conf
> /etc/libvirt/qemu/networks
> /etc/ssh/sshd_config
> /etc/pki
> /etc/logrotate.d/ovirt-node
> /var/lib/random-seed
> /etc/iscsi/initiatorname.iscsi
> /etc/libvirt/qemu.conf
> /etc/sysconfig/libvirtd
> /etc/logrotate.d/libvirtd
> /etc/multipath.conf
> /etc/hosts
> /etc/sysconfig/network-scripts/ifcfg-enp3s0
> /etc/sysconfig/network-scripts/ifcfg-lo
> /etc/shadow
> /etc/shadow
> /etc/vdsm-reg/vdsm-reg.conf
> /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
> /etc/sysconfig/network-scripts/route-ovirtmgmt
> /etc/sysconfig/network-scripts/rule-ovirtmgmt
> /root/.ssh/authorized_keys
> /etc/shadow
> /etc/shadow
> /etc/vdsm/vdsm.id
> /etc/udev/rules.d/12-ovirt-iosched.rules
> /etc/sysconfig/iptables
> /etc/vdsm/vdsm.conf
> /etc/shadow
> /etc/resolv.conf
> /etc/ntp.conf
> /etc/sysconfig/network-scripts/ifcfg-VPO_IPPROXY
> /etc/sysconfig/network-scripts/ifcfg-enp6s0
> /etc/sysconfig/network-scripts/ifcfg-enp6s0.50
> /etc/glusterfs/glusterd.vol
> /etc/selinux/config
>
>
>
>
> On Wed, Dec 18, 2013 at 12:07 PM, Fabian Deutsch
> <fabiand at redhat.com> wrote:
> Am Mittwoch, den 18.12.2013, 12:03 +0200 schrieb Gabi
> C:
> > So here it is:
> >
> >
> > in tab volumes add new volume - Replicated, then
> added storage -
> > data/glusterfs. Then I impoerted Vm, ran them and at
> some point,
> > needing some space for a Redhat Satellite instance
> I decided to put
> > both node in maintenace stop them add new disk
> devices and restart,
> > but after restart the gluster volume defined under
> Volumes Tab
> > vanished!
>
>
> Antoni,
>
> can you tell what log files to look at to find out why
> that storage
> domain vanished - from a Engine side?
>
> And do you know what files related to gluster are
> changed on the Node
> side?
>
> Gabi,
>
> could you please provide the contents of /config/files
> on the Node.
>
> > Glusterfs data goes under /data directory which was
> automatically
> > configured when I installed the node.
>
>
> Yep, /data is on the Data LV - that should be good.
>
> - fabian
>
> >
> >
> > On Wed, Dec 18, 2013 at 11:45 AM, Fabian Deutsch
> <fabiand at redhat.com>
> > wrote:
> > Am Mittwoch, den 18.12.2013, 11:42 +0200
> schrieb Gabi C:
> > > Yes, it is the VM part..I just run into an
> issue. My setup
> > consist in
> > > 2 nodes with glusterfs and after adding
> supplemental hard
> > disk, after
> > > reboot I've lost glusterfs volumes!
> >
> >
> > Could you exactly explain what you
> configured?
> >
> > >
> > > How can I persist any configuration on
> node and I refer here
> > to
> > > ''setenforce 0'' - for ssh login to work-
> and further
> >
> >
> > How changes can be persisted on Node can be
> found here:
> >
> http://www.ovirt.org/Node_Troubleshooting#Making_changes_on_the_host
> >
> > Do you know into what path the glusterfs
> data goes? Or is it
> > written
> > directly onto a disk/LV?
> >
> > - fabian
> >
> > > ""
> http://www.ovirt.org/Features/GlusterFS_Storage_Domain
> > > * option rpc-auth-allow-insecure on
> ==> in
> > glusterd.vol (ensure
> > > u restart glusterd service... for
> this to take
> > effect)
> >
> > > * volume set <volname>
> server.allow-insecure on ==>
> > (ensure u
> > > stop and start the volume.. for
> this to take
> > effect)''
> > >
> > >
> > > Thanks!
> > >
> > >
> > >
> > >
> > >
> > > On Wed, Dec 18, 2013 at 11:35 AM, Fabian
> Deutsch
> > <fabiand at redhat.com>
> > > wrote:
> > > Am Mittwoch, den 18.12.2013, 08:34
> +0200 schrieb
> > Gabi C:
> > > > Hello!
> > > >
> > > >
> > > > In order to increase disk space
> I want to add a
> > new disk
> > > drive to
> > > > ovirt node. After adding this
> should I proceed as
> > "normal" -
> > > pvcreate,
> > > > vgcreate, lvcreate and so on -
> or these
> > configuration will
> > > not
> > > > persist?
> > >
> > >
> > > Hey Gabi,
> > >
> > > basically plain LVM is used in
> Node - so yes
> > pvcreate and
> > > lvextend can
> > > be used.
> > > What storage part do you want to
> extend? The part
> > where the
> > > VMs reside?
> > > You will also need to take care to
> extend the
> > filesystem.
> > >
> > > - fabian
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ovirt.org/pipermail/users/attachments/20131218/cc15ca03/attachment-0001.sig>
More information about the Users
mailing list