[Users] ovirt Connection Storage error

[Liron Aravot]

Hi,
can you please tell me what's the DC version?
can you also please run the following query and reply with the results?

select * from vdc_options where option_name like '%SupportForceCreateVG%';

----- Original Message -----
> From: "xianghuadu" <xianghuadu at gmail.com>
> To: "Liron Aravot" <laravot at redhat.com>
> Cc: "users" <users at ovirt.org>
> Sent: Wednesday, February 27, 2013 10:30:09 AM
> Subject: Re: Re: [Users] ovirt Connection Storage error
> 
> 
> hi liron aravot
> Thank you for your help
> 
> 	
> 
> [root at kvm1 libvirt]# cat libvirtd.conf
> # Master libvirt daemon configuration file
> #
> # For further information consult http://libvirt.org/format.html
> #
> # NOTE: the tests/daemon-conf regression test script requires
> # that each "PARAMETER = VALUE" line in this file have the parameter
> # name just after a leading "#".
> 
> #################################################################
> #
> # Network connectivity controls
> #
> 
> # Flag listening for secure TLS connections on the public TCP/IP
> port.
> # NB, must pass the --listen flag to the libvirtd process for this to
> # have any effect.
> #
> # It is necessary to setup a CA and issue server certificates before
> # using this capability.
> #
> # This is enabled by default, uncomment this to disable it
> #listen_tls = 0
> 
> # Listen for unencrypted TCP connections on the public TCP/IP port.
> # NB, must pass the --listen flag to the libvirtd process for this to
> # have any effect.
> #
> # Using the TCP socket requires SASL authentication by default. Only
> # SASL mechanisms which support data encryption are allowed. This is
> # DIGEST_MD5 and GSSAPI (Kerberos5)
> #
> # This is disabled by default, uncomment this to enable it.
> #listen_tcp = 1
> 
> 
> 
> # Override the port for accepting secure TLS connections
> # This can be a port number, or service name
> #
> #tls_port = "16514"
> 
> # Override the port for accepting insecure TCP connections
> # This can be a port number, or service name
> #
> #tcp_port = "16509"
> 
> 
> # Override the default configuration which binds to all network
> # interfaces. This can be a numeric IPv4/6 address, or hostname
> #
> #listen_addr = "192.168.0.1"
> 
> 
> # Flag toggling mDNS advertizement of the libvirt service.
> #
> # Alternatively can disable for all services on a host by
> # stopping the Avahi daemon
> #
> # This is enabled by default, uncomment this to disable it
> #mdns_adv = 0
> 
> # Override the default mDNS advertizement name. This must be
> # unique on the immediate broadcast network.
> #
> # The default is "Virtualization Host HOSTNAME", where HOSTNAME
> # is subsituted for the short hostname of the machine (without
> domain)
> #
> #mdns_name = "Virtualization Host Joe Demo"
> 
> 
> #################################################################
> #
> # UNIX socket access controls
> #
> 
> # Set the UNIX domain socket group ownership. This can be used to
> # allow a 'trusted' set of users access to management capabilities
> # without becoming root.
> #
> # This is restricted to 'root' by default.
> #unix_sock_group = "libvirt"
> 
> # Set the UNIX socket permissions for the R/O socket. This is used
> # for monitoring VM status only
> #
> # Default allows any user. If setting group ownership may want to
> # restrict this to:
> #unix_sock_ro_perms = "0777"
> 
> # Set the UNIX socket permissions for the R/W socket. This is used
> # for full management of VMs
> #
> # Default allows only root. If PolicyKit is enabled on the socket,
> # the default will change to allow everyone (eg, 0777)
> #
> # If not using PolicyKit and setting group ownership for access
> # control then you may want to relax this to:
> #unix_sock_rw_perms = "0770"
> 
> # Set the name of the directory in which sockets will be
> found/created.
> #unix_sock_dir = "/var/run/libvirt"
> 
> #################################################################
> #
> # Authentication.
> #
> # - none: do not perform auth checks. If you can connect to the
> # socket you are allowed. This is suitable if there are
> # restrictions on connecting to the socket (eg, UNIX
> # socket permissions), or if there is a lower layer in
> # the network providing auth (eg, TLS/x509 certificates)
> #
> # - sasl: use SASL infrastructure. The actual auth scheme is then
> # controlled from /etc/sasl2/libvirt.conf. For the TCP
> # socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
> # For non-TCP or TLS sockets, any scheme is allowed.
> #
> # - polkit: use PolicyKit to authenticate. This is only suitable
> # for use on the UNIX sockets. The default policy will
> # require a user to supply their own password to gain
> # full read/write access (aka sudo like), while anyone
> # is allowed read/only access.
> #
> # Set an authentication scheme for UNIX read-only sockets
> # By default socket permissions allow anyone to connect
> #
> # To restrict monitoring of domains you may wish to enable
> # an authentication mechanism here
> #auth_unix_ro = "none"
> 
> # Set an authentication scheme for UNIX read-write sockets
> # By default socket permissions only allow root. If PolicyKit
> # support was compiled into libvirt, the default will be to
> # use 'polkit' auth.
> #
> # If the unix_sock_rw_perms are changed you may wish to enable
> # an authentication mechanism here
> #auth_unix_rw = "none"
> 
> # Change the authentication scheme for TCP sockets.
> #
> # If you don't enable SASL, then all TCP traffic is cleartext.
> # Don't do this outside of a dev/test scenario. For real world
> # use, always enable SASL and use the GSSAPI or DIGEST-MD5
> # mechanism in /etc/sasl2/libvirt.conf
> #auth_tcp = "sasl"
> 
> # Change the authentication scheme for TLS sockets.
> #
> # TLS sockets already have encryption provided by the TLS
> # layer, and limited authentication is done by certificates
> #
> # It is possible to make use of any SASL authentication
> # mechanism as well, by using 'sasl' for this option
> #auth_tls = "none"
> 
> 
> 
> #################################################################
> #
> # TLS x509 certificate configuration
> #
> 
> 
> # Override the default server key file path
> #
> #key_file = "/etc/pki/libvirt/private/serverkey.pem"
> 
> # Override the default server certificate file path
> #
> #cert_file = "/etc/pki/libvirt/servercert.pem"
> 
> # Override the default CA certificate path
> #
> #ca_file = "/etc/pki/CA/cacert.pem"
> 
> # Specify a certificate revocation list.
> #
> # Defaults to not using a CRL, uncomment to enable it
> #crl_file = "/etc/pki/CA/crl.pem"
> 
> 
> 
> #################################################################
> #
> # Authorization controls
> #
> 
> 
> # Flag to disable verification of our own server certificates
> #
> # When libvirtd starts it performs some sanity checks against
> # its own certificates.
> #
> # Default is to always run sanity checks. Uncommenting this
> # will disable sanity checks which is not a good idea
> #tls_no_sanity_certificate = 1
> 
> # Flag to disable verification of client certificates
> #
> # Client certificate verification is the primary authentication
> mechanism.
> # Any client which does not present a certificate signed by the CA
> # will be rejected.
> #
> # Default is to always verify. Uncommenting this will disable
> # verification - make sure an IP whitelist is set
> #tls_no_verify_certificate = 1
> 
> 
> # A whitelist of allowed x509 Distinguished Names
> # This list may contain wildcards such as
> #
> # "C=GB,ST=London,L=London,O=Red Hat,CN=*"
> #
> # See the POSIX fnmatch function for the format of the wildcards.
> #
> # NB If this is an empty list, no client can connect, so comment out
> # entirely rather than using empty list to disable these checks
> #
> # By default, no DN's are checked
> #tls_allowed_dn_list = ["DN1", "DN2"]
> 
> 
> # A whitelist of allowed SASL usernames. The format for usernames
> # depends on the SASL authentication mechanism. Kerberos usernames
> # look like username at REALM
> #
> # This list may contain wildcards such as
> #
> # "*@EXAMPLE.COM"
> #
> # See the POSIX fnmatch function for the format of the wildcards.
> #
> # NB If this is an empty list, no client can connect, so comment out
> # entirely rather than using empty list to disable these checks
> #
> # By default, no Username's are checked
> #sasl_allowed_username_list = ["joe at EXAMPLE.COM", "fred at EXAMPLE.COM"
> ]
> 
> 
> 
> #################################################################
> #
> # Processing controls
> #
> 
> # The maximum number of concurrent client connections to allow
> # over all sockets combined.
> #max_clients = 20
> 
> 
> # The minimum limit sets the number of workers to start up
> # initially. If the number of active clients exceeds this,
> # then more threads are spawned, upto max_workers limit.
> # Typically you'd want max_workers to equal maximum number
> # of clients allowed
> #min_workers = 5
> #max_workers = 20
> 
> 
> # The number of priority workers. If all workers from above
> # pool will stuck, some calls marked as high priority
> # (notably domainDestroy) can be executed in this pool.
> #prio_workers = 5
> 
> # Total global limit on concurrent RPC calls. Should be
> # at least as large as max_workers. Beyond this, RPC requests
> # will be read into memory and queued. This directly impact
> # memory usage, currently each request requires 256 KB of
> # memory. So by default upto 5 MB of memory is used
> #
> # XXX this isn't actually enforced yet, only the per-client
> # limit is used so far
> #max_requests = 20
> 
> # Limit on concurrent requests from a single client
> # connection. To avoid one client monopolizing the server
> # this should be a small fraction of the global max_requests
> # and max_workers parameter
> #max_client_requests = 5
> 
> #################################################################
> #
> # Logging controls
> #
> 
> # Logging level: 4 errors, 3 warnings, 2 information, 1 debug
> # basically 1 will log everything possible
> #log_level = 3
> 
> # Logging filters:
> # A filter allows to select a different logging level for a given
> category
> # of logs
> # The format for a filter is:
> # x:name
> # where name is a match string e.g. remote or qemu
> # the x prefix is the minimal level where matching messages should be
> logged
> # 1: DEBUG
> # 2: INFO
> # 3: WARNING
> # 4: ERROR
> #
> # Multiple filter can be defined in a single @filters, they just need
> to be
> # separated by spaces.
> #
> # e.g:
> # log_filters="3:remote 4:event"
> # to only get warning or errors from the remote layer and only errors
> from
> # the event layer.
> 
> # Logging outputs:
> # An output is one of the places to save logging information
> # The format for an output can be:
> # x:stderr
> # output goes to stderr
> # x:syslog:name
> # use syslog for the output and use the given name as the ident
> # x:file:file_path
> # output to a file, with the given filepath
> # In all case the x prefix is the minimal level, acting as a filter
> # 1: DEBUG
> # 2: INFO
> # 3: WARNING
> # 4: ERROR
> #
> # Multiple output can be defined, they just need to be separated by
> spaces.
> # e.g.:
> # log_outputs="3:syslog:libvirtd"
> # to log all warnings and errors to syslog under the libvirtd ident
> 
> # Log debug buffer size: default 64
> # The daemon keeps an internal debug log buffer which will be dumped
> in case
> # of crash or upon receiving a SIGUSR2 signal. This setting allows to
> override
> # the default buffer size in kilobytes.
> # If value is 0 or less the debug log buffer is deactivated
> #log_buffer_size = 64
> 
> 
> ##################################################################
> #
> # Auditing
> #
> # This setting allows usage of the auditing subsystem to be altered:
> #
> # audit_level == 0 -> disable all auditing
> # audit_level == 1 -> enable auditing, only if enabled on host
> (default)
> # audit_level == 2 -> enable auditing, and exit if disabled on host
> #
> #audit_level = 2
> #
> # If set to 1, then audit messages will also be sent
> # via libvirt logging infrastructure. Defaults to 0
> #
> #audit_logging = 1
> 
> ###################################################################
> # UUID of the host:
> # Provide the UUID of the host here in case the command
> # 'dmidecode -s system-uuid' does not provide a valid uuid. In case
> # 'dmidecode' does not provide a valid UUID and none is provided
> here, a
> # temporary UUID will be generated.
> # Keep the format of the example UUID below. UUID must not have all
> digits
> # be the same.
> 
> # NB This default all-zeros UUID will not work. Replace
> # it with the output of the 'uuidgen' command and then
> # uncomment this entry
> #host_uuid = "00000000-0000-0000-0000-000000000000"
> 
> ###################################################################
> # Keepalive protocol:
> # This allows libvirtd to detect broken client connections or even
> # dead client. A keepalive message is sent to a client after
> # keepalive_interval seconds of inactivity to check if the client is
> # still responding; keepalive_count is a maximum number of keepalive
> # messages that are allowed to be sent to the client without getting
> # any response before the connection is considered broken. In other
> # words, the connection is automatically closed approximately after
> # keepalive_interval * (keepalive_count + 1) seconds since the last
> # message received from the client. If keepalive_interval is set to
> # -1, libvirtd will never send keepalive requests; however clients
> # can still send them and the deamon will send responses. When
> # keepalive_count is set to 0, connections will be automatically
> # closed after keepalive_interval seconds of inactivity without
> # sending any keepalive messages. Disabled by default.
> #
> #keepalive_interval = 5
> #keepalive_count = 5
> #
> # If set to 1, libvirtd will refuse to talk to clients that do not
> # support keepalive protocol. Defaults to 0.
> #
> #keepalive_required = 1
> ## beginning of configuration section by vdsm-4.9.6
> listen_addr="0.0.0.0"
> unix_sock_group="kvm"
> unix_sock_rw_perms="0770"
> auth_unix_rw="sasl"
> save_image_format="lzop"
> log_outputs="1:file:/var/log/libvirtd.log"
> log_filters="1:libvirt 3:event 3:json 1:util 1:qemu"
> ca_file="/etc/pki/vdsm/certs/cacert.pem"
> cert_file="/etc/pki/vdsm/certs/vdsmcert.pem"
> key_file="/etc/pki/vdsm/keys/vdsmkey.pem"
> ## end of configuration section by vdsm-4.9.6
> 
> 	
> 
> [root at kvm1 libvirt]# tail /var/log/libvirt/libvirtd.log -n 20
> 2013-02-26 06:33:27.063+0000: 2128: error :
> remoteDispatchAuthPolkit:2559 : Policy kit denied action
> org.libvirt.unix.manage from pid 4031, uid 36: exit status 2
> 2013-02-26 06:33:27.063+0000: 2128: error :
> remoteDispatchAuthPolkit:2588 : authentication failed: Authorization
> requires authentication but no agent is available.
> 
> 2013-02-26 06:33:27.098+0000: 2119: error : virNetSocketReadWire:999
> : End of file while reading data: Input/output error
> 2013-02-26 06:33:27.333+0000: 2120: error :
> remoteDispatchAuthPolkit:2559 : Policy kit denied action
> org.libvirt.unix.manage from pid 4041, uid 36: exit status 2
> 2013-02-26 06:33:27.333+0000: 2120: error :
> remoteDispatchAuthPolkit:2588 : authentication failed: Authorization
> requires authentication but no agent is available.
> 
> 2013-02-26 06:33:27.368+0000: 2119: error : virNetSocketReadWire:999
> : End of file while reading data: Input/output error
> 2013-02-26 06:33:27.603+0000: 2122: error :
> remoteDispatchAuthPolkit:2559 : Policy kit denied action
> org.libvirt.unix.manage from pid 4051, uid 36: exit status 2
> 2013-02-26 06:33:27.603+0000: 2122: error :
> remoteDispatchAuthPolkit:2588 : authentication failed: Authorization
> requires authentication but no agent is available.
> 
> 2013-02-26 06:33:27.636+0000: 2119: error : virNetSocketReadWire:999
> : End of file while reading data: Input/output error
> 2013-02-26 06:33:27.871+0000: 2124: error :
> remoteDispatchAuthPolkit:2559 : Policy kit denied action
> org.libvirt.unix.manage from pid 4061, uid 36: exit status 2
> 2013-02-26 06:33:27.872+0000: 2124: error :
> remoteDispatchAuthPolkit:2588 : authentication failed: Authorization
> requires authentication but no agent is available.
> 
> 2013-02-26 06:33:27.904+0000: 2119: error : virNetSocketReadWire:999
> : End of file while reading data: Input/output error
> 2013-02-26 06:33:28.142+0000: 2126: error :
> remoteDispatchAuthPolkit:2559 : Policy kit denied action
> org.libvirt.unix.manage from pid 4071, uid 36: exit status 2
> 2013-02-26 06:33:28.142+0000: 2126: error :
> remoteDispatchAuthPolkit:2588 : authentication failed: Authorization
> requires authentication but no agent is available.
> 
> 2013-02-26 06:33:28.176+0000: 2119: error : virNetSocketReadWire:999
> : End of file while reading data: Input/output error
> 
> 
> xianghuadu
> 
> 
> 
> From: Liron Aravot
> Date: 2013-02-27 16:01
> To: xianghuadu
> CC: users
> Subject: Re: [Users] ovirt Connection Storage error
> 
> Hi, looking in the vdsm logs i see
> libvirtError: authentication failed: Authorization requires
> authentication but no agent is available.
> 
> can you please attach your libvirt configuration file and the libvirt
> log perhaps?
> 
> ----- Original Message -----
> > From: "xianghuadu" <xianghuadu at gmail.com>
> > To: "Liron Aravot" <laravot at redhat.com>
> > Cc: "users" <users at ovirt.org>
> > Sent: Tuesday, February 26, 2013 10:21:57 AM
> > Subject: Re: Re: [Users] ovirt Connection Storage error
> > 
> > 
> > hi liron aravot
> > attached is full vdsm log
> > thx
> > 
> > 
> > xianghuadu
> > 
> > 
> > 
> > From: Liron Aravot
> > Date: 2013-02-26 15:50
> > To: xianghuadu
> > CC: users
> > Subject: Re: [Users] ovirt Connection Storage error
> > 
> > Hi,
> > can you please attach the full vdsm log?
> > 
> > ----- Original Message -----
> > > From: "xianghuadu" <xianghuadu at gmail.com>
> > > To: "users" <users at ovirt.org>
> > > Sent: Tuesday, February 26, 2013 9:27:05 AM
> > > Subject: [Users] ovirt Connection Storage error
> > > 
> > > 
> > > 
> > > Hi all
> > > Add iscsi storage, Error while executing action New SAN storage
> > > Domain: Unexpected exception.
> > > engine log
> > > 
> > > 
> > > 
> > > 2013-02-26 15:09:08,211 INFO
> > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > (ajp--127.0.0.1-8702-1) [4952790e] HostName = 225
> > > 2013-02-26 15:09:08,212 ERROR
> > > [org.ovirt.engine.core.vdsbroker.VDSCommandBase]
> > > (ajp--127.0.0.1-8702-1) [4952790e] Command FormatStorageDomainVDS
> > > execution failed. Exception: VDSErrorException:
> > > VDSGenericException:
> > > VDSErrorException: Failed to FormatStorageDomainVDS, error =
> > > Cannot
> > > format attached storage domain:
> > > ('378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce',)
> > > 2013-02-26 15:09:08,214 INFO
> > > [org.ovirt.engine.core.vdsbroker.vdsbroker.FormatStorageDomainVDSCommand]
> > > (ajp--127.0.0.1-8702-1) [4952790e] FINISH,
> > > FormatStorageDomainVDSCommand, log id: 1f498799
> > > 2013-02-26 15:09:08,215 ERROR
> > > [org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand]
> > > (ajp--127.0.0.1-8702-1) [4952790e] Command
> > > org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand
> > > throw
> > > Vdc Bll exception. With error message VdcBLLException:
> > > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> > > VDSGenericException: VDSErrorException: Failed to
> > > FormatStorageDomainVDS, error = Cannot format attached storage
> > > domain: ('378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce',)
> > > 2013-02-26 15:09:08,221 INFO
> > > [org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand]
> > > (ajp--127.0.0.1-8702-1) [4952790e] Lock freed to object
> > > EngineLock
> > > [exclusiveLocks= key: 378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce value:
> > > STORAGE
> > > , sharedLocks= ]
> > > 2013-02-26 15:09:42,067 WARN
> > > [org.ovirt.engine.core.bll.storage.UpdateStoragePoolCommand]
> > > (ajp--127.0.0.1-8702-6) [a8c7727] CanDoAction of action
> > > UpdateStoragePool failed.
> > > Reasons:VAR__TYPE__STORAGE__POOL,ACTION_TYPE_FAILED_STORAGE_POOL_WITH_DEFAULT_VDS_GROUP_CANNOT_BE_LOCALFS,VAR__ACTION__UPDATE
> > > 2013-02-26 15:09:59,224 INFO
> > > [org.ovirt.engine.core.bll.storage.UpdateStoragePoolCommand]
> > > (ajp--127.0.0.1-8702-3) [3d8faa5f] Running command:
> > > UpdateStoragePoolCommand internal: false. Entities affected : ID:
> > > da5870e0-7aae-11e2-9da5-00188be4de29 Type: StoragePool
> > > 2013-02-26 15:10:00,000 INFO
> > > [org.ovirt.engine.core.bll.AutoRecoveryManager]
> > > (QuartzScheduler_Worker-80) Autorecovering hosts is disabled,
> > > skipping
> > > 2013-02-26 15:10:00,001 INFO
> > > [org.ovirt.engine.core.bll.AutoRecoveryManager]
> > > (QuartzScheduler_Worker-80) Autorecovering storage domains is
> > > disabled, skipping
> > > 2013-02-26 15:10:23,814 INFO
> > > [org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand]
> > > (ajp--127.0.0.1-8702-2) START, GetDeviceListVDSCommand(HostName =
> > > 225, HostId = 342b111a-7fdf-11e2-a963-00188be4de29,
> > > storageType=ISCSI), log id: 484eccef
> > > 2013-02-26 15:10:24,119 INFO
> > > [org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand]
> > > (ajp--127.0.0.1-8702-2) FINISH, GetDeviceListVDSCommand, return:
> > > [org.ovirt.engine.core.common.businessentities.LUNs at b420cc6], log
> > > id: 484eccef
> > > 2013-02-26 15:10:32,523 INFO
> > > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] Running command:
> > > AddSANStorageDomainCommand internal: false. Entities affected :
> > > ID:
> > > aaa00000-0000-0000-0000-123456789aaa Type: System
> > > 2013-02-26 15:10:32,539 INFO
> > > [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] START,
> > > CreateVGVDSCommand(HostName = 225, HostId =
> > > 342b111a-7fdf-11e2-a963-00188be4de29,
> > > storageDomainId=c13260c4-d1aa-455c-9031-0711a7a4cc8d,
> > > deviceList=[1494554000000000078797a00000000000000000000000000],
> > > force=false), log id: 4f1651f1
> > > 2013-02-26 15:10:32,578 ERROR
> > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] Failed in CreateVGVDS method
> > > 2013-02-26 15:10:32,579 ERROR
> > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] Error code unexpected and
> > > error
> > > message VDSGenericException: VDSErrorException: Failed to
> > > CreateVGVDS, error = Unexpected exception
> > > 2013-02-26 15:10:32,581 INFO
> > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] Command
> > > org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand
> > > return
> > > value
> > > Class Name:
> > > org.ovirt.engine.core.vdsbroker.irsbroker.OneUuidReturnForXmlRpc
> > > mUuid Null
> > > mStatus Class Name:
> > > org.ovirt.engine.core.vdsbroker.vdsbroker.StatusForXmlRpc
> > > mCode 16
> > > mMessage Unexpected exception
> > > 
> > > 2013-02-26 15:10:32,585 INFO
> > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] HostName = 225
> > > 2013-02-26 15:10:32,586 ERROR
> > > [org.ovirt.engine.core.vdsbroker.VDSCommandBase]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] Command CreateVGVDS execution
> > > failed. Exception: VDSErrorException: VDSGenericException:
> > > VDSErrorException: Failed to CreateVGVDS, error = Unexpected
> > > exception
> > > 2013-02-26 15:10:32,588 INFO
> > > [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] FINISH, CreateVGVDSCommand,
> > > log
> > > id: 4f1651f1
> > > 2013-02-26 15:10:32,589 ERROR
> > > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] Command
> > > org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand
> > > throw
> > > Vdc Bll exception. With error message VdcBLLException:
> > > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> > > VDSGenericException: VDSErrorException: Failed to CreateVGVDS,
> > > error
> > > = Unexpected exception
> > > 2013-02-26 15:10:32,600 INFO
> > > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] Command
> > > [id=62567c07-e736-4909-a501-ee8663d71eac]: Compensating
> > > NEW_ENTITY_ID of
> > > org.ovirt.engine.core.common.businessentities.storage_domain_dynamic;
> > > snapshot: c13260c4-d1aa-455c-9031-0711a7a4cc8d.
> > > 2013-02-26 15:10:32,607 INFO
> > > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] Command
> > > [id=62567c07-e736-4909-a501-ee8663d71eac]: Compensating
> > > NEW_ENTITY_ID of
> > > org.ovirt.engine.core.common.businessentities.storage_domain_static;
> > > snapshot: c13260c4-d1aa-455c-9031-0711a7a4cc8d.
> > > 2013-02-26 15:10:32,617 ERROR
> > > [org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
> > > (ajp--127.0.0.1-8702-4) [66fa978c] Transaction rolled-back for
> > > command:
> > > org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand.
> > > vdsm log
> > > 
> > > 
> > > 
> > > Thread-1296::DEBUG::2013-02-26
> > > 15:19:23,200::resourceManager::844::ResourceManager.Owner::(cancelAll)
> > > Owner.cancelAll requests {}
> > > Thread-1296::DEBUG::2013-02-26
> > > 15:19:23,200::task::978::TaskManager.Task::(_decref)
> > > Task=`d9716eca-da88-472d-8fdd-19b8be8a02ab`::ref 0 aborting False
> > > Thread-1302::DEBUG::2013-02-26
> > > 15:19:33,367::task::588::TaskManager.Task::(_updateState)
> > > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::moving from state
> > > init
> > > -> state preparing
> > > Thread-1302::INFO::2013-02-26
> > > 15:19:33,367::logUtils::37::dispatcher::(wrapper) Run and
> > > protect:
> > > repoStats(options=None)
> > > Thread-1302::INFO::2013-02-26
> > > 15:19:33,368::logUtils::39::dispatcher::(wrapper) Run and
> > > protect:
> > > repoStats, Return response: {}
> > > Thread-1302::DEBUG::2013-02-26
> > > 15:19:33,368::task::1172::TaskManager.Task::(prepare)
> > > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::finished: {}
> > > Thread-1302::DEBUG::2013-02-26
> > > 15:19:33,368::task::588::TaskManager.Task::(_updateState)
> > > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::moving from state
> > > preparing -> state finished
> > > Thread-1302::DEBUG::2013-02-26
> > > 15:19:33,368::resourceManager::809::ResourceManager.Owner::(releaseAll)
> > > Owner.releaseAll requests {} resources {}
> > > Thread-1302::DEBUG::2013-02-26
> > > 15:19:33,368::resourceManager::844::ResourceManager.Owner::(cancelAll)
> > > Owner.cancelAll requests {}
> > > Thread-1302::DEBUG::2013-02-26
> > > 15:19:33,368::task::978::TaskManager.Task::(_decref)
> > > Task=`30352e65-67be-4cea-a094-9830c5bda21f`::ref 0 aborting False
> > > _______________________________________________
> > > Users mailing list
> > > Users at ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > >