[Users] Fwd: Re: Permission issues
suporte at logicworks.pt
suporte at logicworks.pt
Mon Feb 25 15:46:13 UTC 2013
I have the node activated but now cannot attach a NFS domain. I allways get the message: failed to attach Storage domain to Data Center default
I have SELinux disabled in the host and engine.
The sanlock log shows :
2013-02-25 15:33:41+0000 9535 [21168]: open error -13 /rhev/data-center/mnt/192.168.5.178:_mnt_nfs-share_nfs_nfs-share/43baa487-aad8-4d60-8e48-f7a3b3899cd3/dom_md/ids
2013-02-25 15:33:41+0000 9535 [21168]: s2 open_disk /rhev/data-center/mnt/192.168.5.178:_mnt_nfs-share_nfs_nfs-share/43baa487-aad8-4d60-8e48-f7a3b3899cd3/dom_md/ids error -13
2013-02-25 15:33:42+0000 9536 [938]: s2 add_lockspace fail result -19
2013-02-25 15:33:58+0000 9553 [937]: s3 lockspace 43baa487-aad8-4d60-8e48-f7a3b3899cd3:250:/rhev/data-center/mnt/192.168.5.178:_mnt_nfs-share_nfs_nfs-share/43baa487-aad8-4d60-8e48-f7a3b3899cd3/dom_md/ids:0
2013-02-25 15:33:58+0000 9553 [21208]: open error -13 /rhev/data-center/mnt/192.168.5.178:_mnt_nfs-share_nfs_nfs-share/43baa487-aad8-4d60-8e48-f7a3b3899cd3/dom_md/ids
2013-02-25 15:33:58+0000 9553 [21208]: s3 open_disk /rhev/data-center/mnt/192.168.5.178:_mnt_nfs-share_nfs_nfs-share/43baa487-aad8-4d60-8e48-f7a3b3899cd3/dom_md/ids error -13
2013-02-25 15:33:59+0000 9554 [937]: s3 add_lockspace fail result -19
Cannot find a way to fix it.
Any idea?
----- Mensagem original -----
De: "Jakub Bittner" <j.bittner at nbu.cz>
Para: users at ovirt.org
Enviadas: Segunda-feira, 25 de Fevereiro de 2013 12:58:01
Assunto: Re: [Users] Fwd: Re: Permission issues
This problem occurs if SELINUX is disabled, changing state to PERMISSIVE solves this issue.
Dne 25.2.2013 13:35, Jakub Bittner napsal(a):
Than you for sharing your process. I also try it, but I am getting errors while installing vdsm:
ERROR: Could not determine running system's policy version.
ERROR: Unable to open policy /etc/selinux/targeted/policy/policy.27.
/var/tmp/rpm-tmp.yqBAt7: line 1: 1087 Unauthorized access to memory (SIGSEGV) /usr/bin/vdsm-tool sebool-config
ERROR: Could not determine running system's policy version.
ERROR: Unable to open policy /etc/selinux/targeted/policy/policy.27.
/var/tmp/rpm-tmp.yqBAt7: line 3: 1088 Unauthorized access to memory (SIGSEGV) /usr/bin/vdsm-tool set-saslpasswd
Verifying : vdsm-4.10.3-8.fc18.x86_64
kernel: vdsm-tool[1173]: segfault at 0 ip 00007f1dc72905f8 sp 00007fff60814750 error 4 in libapol.so.4.3[7f1dc7269000+34000]
kernel: vdsm-tool[1174]: segfault at 0 ip 00007f10de8975f8 sp 00007fff4fa8be90 error 4 in libapol.so.4.3[7f10de870000+34000]
vdsm-tool
ERROR: Could not determine running system's policy version.
ERROR: Unable to open policy /etc/selinux/targeted/policy/policy.27.
Neoprávněný přístup do paměti (SIGSEGV)
rpm -qa|grep vdsm
vdsm-xmlrpc-4.10.3-8.fc18.noarch
vdsm-cli-4.10.3-8.fc18.noarch
vdsm-4.10.3-8.fc18.x86_64
vdsm-python-4.10.3-8.fc18.x86_64
rpm -qa|grep systemd
systemd-libs-197-1.fc18.2.x86_64
systemd-197-1.fc18.2.x86_64
systemd-sysv-197-1.fc18.2.x86_64
Dne 22.2.2013 18:45, suporte at logicworks.pt napsal(a):
<blockquote>
well, it's working now.
I remove vdsm (vdsm-gluster too, a dependency rpm )
install again vdsm first and than vdsm-gluster, and the host is active !!
----- Mensagem original -----
De: suporte at logicworks.pt
Para: users at ovirt.org
Enviadas: Sexta-feira, 22 de Fevereiro de 2013 16:58:58
Assunto: Re: [Users] Fwd: Re: Permission issues
I notice that vdsm service is not running:
systemctl status vdsmd.service
vdsmd.service - Virtual Desktop Server Manager
Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled)
Active: failed (Result: exit-code) since Fri 2013-02-22 16:42:24 WET; 1min 45s ago
Process: 1880 ExecStart=/lib/systemd/systemd-vdsmd start (code=exited, status=1/FAILURE)
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2
Feb 22 16:42:24 node2.acloud.pt python[2011]: DIGEST-MD5 client step 2
Feb 22 16:42:24 node2.acloud.pt systemd-vdsmd[1880]: vdsm: Failed to define network filters on libvirt[FAILED]
Feb 22 16:42:24 node2.acloud.pt systemd[1]: vdsmd.service: control process exited, code=exited status=1
Feb 22 16:42:24 node2.acloud.pt systemd[1]: Failed to start Virtual Desktop Server Manager.
Feb 22 16:42:24 node2.acloud.pt systemd[1]: Unit vdsmd.service entered failed state
rpm -qa|grep vdsm
vdsm-python-4.10.3-8.fc18.x86_64
vdsm-gluster-4.10.3-8.fc18.noarch
vdsm-4.10.3-8.fc18.x86_64
vdsm-xmlrpc-4.10.3-8.fc18.noarch
vdsm-cli-4.10.3-8.fc18.noarch
----- Mensagem original -----
De: suporte at logicworks.pt
Para: users at ovirt.org
Enviadas: Sexta-feira, 22 de Fevereiro de 2013 15:35:49
Assunto: Re: [Users] Fwd: Re: Permission issues
Hi,
I cannot install a F18 host
I installed a minimal F18 than
yum install net-tools
systemctl stop NetworkManager.service systemctl disable NetworkManager.service add a gateway to /etc/sysconfig/network remove /usr/lib/udev/rules.d/60-net.rules systemctl enable network.service systemctl start network.service chkconfig network on reboot
rpm -qa|grep systemd
systemd-sysv-197-1.fc18.2.x86_64
systemd-197-1.fc18.2.x86_64
systemd-libs-197-1.fc18.2.x86_64
SELinux is disabled
yum localinstall http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm Than I add it to the engine via portal
Get no error during the install, but never get out from the " This host is in non responding
state" Did I miss something?
Thanks
Jose
iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED
ACCEPT all -- anywhere anywhere
ACCEPT tcp -- anywhere anywhere tcp dpt:54321
ACCEPT tcp -- anywhere anywhere tcp dpt:ssh
ACCEPT udp -- anywhere anywhere udp dpt:snmp
ACCEPT tcp -- anywhere anywhere tcp dpt:16514
ACCEPT tcp -- anywhere anywhere multiport dports xprtld:6166
ACCEPT tcp -- anywhere anywhere multiport dports 49152:49216
ACCEPT tcp -- anywhere anywhere tcp dpt:24007
ACCEPT udp -- anywhere anywhere udp dpt:sunrpc
ACCEPT tcp -- anywhere anywhere tcp dpt:38465
ACCEPT tcp -- anywhere anywhere tcp dpt:38466
ACCEPT tcp -- anywhere anywhere tcp dpt:38467
ACCEPT tcp -- anywhere anywhere tcp dpt:39543
ACCEPT tcp -- anywhere anywhere tcp dpt:55863
ACCEPT tcp -- anywhere anywhere tcp dpt:38468
ACCEPT udp -- anywhere anywhere udp dpt:963
ACCEPT tcp -- anywhere anywhere tcp dpt:965
ACCEPT tcp -- anywhere anywhere tcp dpt:ctdb
ACCEPT tcp -- anywhere anywhere tcp dpt:netbios-ssn
ACCEPT tcp -- anywhere anywhere tcp dpt:microsoft-ds
ACCEPT tcp -- anywhere anywhere tcp dpts:24009:24108
REJECT all -- anywhere anywhere reject-with icmp-host-prohibited
Chain FORWARD (policy ACCEPT)
target prot opt source destination
REJECT all -- anywhere anywhere PHYSDEV match ! --physdev-is-bridged reject-with icmp-host-prohibited
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
----- Mensagem original -----
De: "Jeff Bailey" <bailey at cs.kent.edu>
Para: users at ovirt.org
Enviadas: Quarta-feira, 20 de Fevereiro de 2013 21:50:38
Assunto: Re: [Users] Fwd: Re: Permission issues
On 2/20/2013 2:55 PM, suporte at logicworks.pt wrote:
> How can I update systemd in the node?
You would need to install from a newer node iso. If you don't want to
wait, you could install a minimal F18, configure your networking, add
the ovirt repo and then just add that host using the engine GUI. At
this stage, you will still have the same problem you currently have.
You then need to:
yum --enablerepo=updates-testing update systemd
After that, remove /usr/lib/udev/rules.d/60-net.rules <- typing from
memory but should be close
Reboot and everything *should* work :)
There are other little things like disabling firewalld, tweeking
multipath.conf, etc that I do but the steps above basically cover it.
> Thanks
>
> ----- Mensagem original -----
> De: "Kevin Maziere Aubry" <kevin.maziere at alterway.fr>
> Para: "Jakub Bittner" <j.bittner at nbu.cz>
> Cc: "users" <users at ovirt.org>
> Enviadas: Quarta-feira, 20 Fevereiro, 2013 17:48:29
> Assunto: Re: [Users] Fwd: Re: Permission issues
>
>
>
> Sur.
> I update systemd and remove udev network conf file.
> I also stop network manager and add gateway to /etc/sysconfig/network.
>
> Also I set dns manager name to /etc/hosts file to avoid dns issue.
>
> It works ;)
> Le 20 févr. 2013 18:42, "Jakub Bittner" < j.bittner at nbu.cz > a écrit :
>
>
> I wonder if is there any way to create ovirt-node from running Fedora 18 netinstalled server. Do anybody know what packages should I install?
>
> Thanks
> ______________________________ _________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/ mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list Users at ovirt.org http://lists.ovirt.org/mailman/listinfo/users
</blockquote>
_______________________________________________
Users mailing list
Users at ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130225/ffd3b7b0/attachment-0001.html>
More information about the Users
mailing list