[Users] setupNetworks failure - Host non-operational

[Alex Leonhardt]

I'm not sure whether it's the same, but in the past (with v3.1) when
configuring the hosts network, it changed it automatically from static ->
dhcp, everytime i change network settings i have to ensure to re-tick the
static address assignment and tick the box to save the settings (scrolling
down) ... hope it helps ..

alex



On 22 January 2013 12:56, Deepak C Shetty <deepakcs at linux.vnet.ibm.com>wrote:

> Hi All,
>     I have a multi-VM setup, where I have ovirt engine on one VM and VDSM
> host on another.
> Discovering the host from the engine puts the host in Unassigned state,
> with the error saying 'ovirtmgmt' network not found.
>
> When i select setupNetworks and drag-drop the ovirtmgmt to setup over
> eth0, i see the below error in VDSM & host goes to non-operataional state.
>
> I tried the steps mentioned by Alon in http://lists.ovirt.org/**
> pipermail/users/2012-December/**011257.html<http://lists.ovirt.org/pipermail/users/2012-December/011257.html>
> but still see the same error
>
> ============= dump from vdsm.log ================
>
> MainProcess|Thread-23::ERROR::**2013-01-22 18:25:53,496::configNetwork::**
> 1438::setupNetworks::(**setupNetworks) Requested operation is not valid:
> cannot set autostart for transient network
> Traceback (most recent call last):
>   File "/usr/share/vdsm/**configNetwork.py", line 1420, in setupNetworks
>     implicitBonding=True, **d)
>   File "/usr/share/vdsm/**configNetwork.py", line 1030, in addNetwork
>     configWriter.**createLibvirtNetwork(network, bridged, iface)
>   File "/usr/share/vdsm/**configNetwork.py", line 208, in
> createLibvirtNetwork
>     self._createNetwork(netXml)
>   File "/usr/share/vdsm/**configNetwork.py", line 192, in _createNetwork
>     net.setAutostart(1)
>   File "/usr/lib64/python2.7/site-**packages/libvirt.py", line 2148, in
> setAutostart
>     if ret == -1: raise libvirtError ('virNetworkSetAutostart() failed',
> net=self)
> libvirtError: Requested operation is not valid: cannot set autostart for
> transient network
> MainProcess|Thread-23::ERROR::**2013-01-22 18:25:53,502::supervdsmServer:*
> *:77::SuperVdsm.ServerCallback:**:(wrapper) Error in setupNetworks
> Traceback (most recent call last):
>   File "/usr/share/vdsm/**supervdsmServer.py", line 75, in wrapper
>     return func(*args, **kwargs)
>   File "/usr/share/vdsm/**supervdsmServer.py", line 170, in setupNetworks
>     return configNetwork.setupNetworks(**networks, bondings, **options)
>   File "/usr/share/vdsm/**configNetwork.py", line 1420, in setupNetworks
>     implicitBonding=True, **d)
>   File "/usr/share/vdsm/**configNetwork.py", line 1030, in addNetwork
>     configWriter.**createLibvirtNetwork(network, bridged, iface)
>   File "/usr/share/vdsm/**configNetwork.py", line 208, in
> createLibvirtNetwork
>     self._createNetwork(netXml)
>   File "/usr/share/vdsm/**configNetwork.py", line 192, in _createNetwork
>     net.setAutostart(1)
>   File "/usr/lib64/python2.7/site-**packages/libvirt.py", line 2148, in
> setAutostart
>     if ret == -1: raise libvirtError ('virNetworkSetAutostart() failed',
> net=self)
> libvirtError: Requested operation is not valid: cannot set autostart for
> transient network
>
>
> ______________________________**_________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users>
>



-- 

| RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130122/c053ff53/attachment-0001.html>