[Users] Bonding - VMs Network performance problem

Mike Kolesnik mkolesni at redhat.com
Tue Jul 16 14:01:31 UTC 2013


----- Original Message -----
> On 07/16/2013 04:09 PM, Ricardo Esteves wrote:
> > Hi,
> >
> > Not really.
> >
> > I can resolve temporally, unconfiguring the bond and then configure it
> > again.
> >
> > But when i reboot the server the problem comes back.
> 
> can you compare the network configuration before and after you change it
> the setup network?

Perhaps you can send pastebin of a 'vdsClient 0 getVdsCaps' (or 'vdsClient -s 0 getVdsCaps' if the first doesn't work)
from the host when the bond is slow, and one after you break and create it again?

if you don't have vdsClient command you can 'yum install vdsm-cli' and it should be available.

> 
> >
> >
> > -----Original Message-----
> > *From*: Itamar Heim <iheim at redhat.com
> > <mailto:Itamar%20Heim%20%3ciheim at redhat.com%3e>>
> > *To*: Ricardo Esteves <maverick.pt at gmail.com
> > <mailto:Ricardo%20Esteves%20%3cmaverick.pt at gmail.com%3e>>
> > *Subject*: Re: [Users] Bonding - VMs Network performance problem
> > *Date*: Tue, 16 Jul 2013 15:38:10 +0300
> >
> > On 07/01/2013 03:12 PM, Ricardo Esteves wrote:
> >> Hi,
> >>
> >> Yes, i'm still experiencing this problem, in fact just happened a few
> >> minutes ago. :)
> >>
> >> All MTUs are 1500.
> >
> > was this resolved?
> >
> >>
> >> -----Original Message-----
> >> *From*: Livnat Peer <lpeer at redhat.com  <mailto:lpeer at redhat.com>
> >> <mailto:Livnat%20Peer%20%3clpeer at redhat.com%3e>>
> >> *To*: Ricardo Esteves <maverick.pt at gmail.com
> >> <mailto:maverick.pt at gmail.com>
> >> <mailto:Ricardo%20Esteves%20%3cmaverick.pt at gmail.com%3e>>
> >> *Subject*: Re: [Users] Bonding - VMs Network performance problem
> >> *Date*: Sun, 23 Jun 2013 11:33:58 +0300
> >>
> >> Hi Ricardo,
> >> Are you still experiencing the problem described below?
> >> Are you configuring MTU (to something other than default or 1500) for
> >> one of the networks on the bond?
> >>
> >> Thanks, Livnat
> >>
> >> On 06/18/2013 05:36 PM, Ricardo Esteves wrote:
> >>> Good afternoon,
> >>>
> >>> Yes, the "Save network configuration" is checked, configurations are
> >>> persistent across boots.
> >>>
> >>> The problem is not the persistence of the configurations, the problem is
> >>> that after a reboot the network performance on the VMs is very bad, and
> >>> to fix it i need to remove the bonding and add it again.
> >>>
> >>> In attachment, the screenshots of my network configuration.
> >>>
> >>> Best regards,
> >>> Ricardo Esteves.
> >>>
> >>> -----Original Message-----
> >>> *From*: Mike Kolesnik <mkolesni at redhat.com  <mailto:mkolesni at redhat.com>
> >>> <mailto:mkolesni at redhat.com>
> >>> <mailto:Mike%20Kolesnik%20%3cmkolesni at redhat.com%3e>>
> >>> *To*: Ricardo Esteves <maverick.pt at gmail.com
> >>> <mailto:maverick.pt at gmail.com>   <mailto:maverick.pt at gmail.com>
> >>> <mailto:Ricardo%20Esteves%20%3cmaverick.pt at gmail.com%3e>>
> >>> *Cc*:Users at ovirt.org  <mailto:Users at ovirt.org>   <mailto:Users at ovirt.org>
> >>> <mailto:Users at ovirt.org>
> >>> *Subject*: Re: [Users] Bonding - VMs Network performance problem
> >>> *Date*: Sun, 26 May 2013 04:57:43 -0400 (EDT)
> >>>
> >>>
> >>>
> >>> ------------------------------------------------------------------------
> >>>
> >>>
> >>>     Hi,
> >>>
> >>>     I've got ovirt installed on 2 HP BL460c G6 blades, and my VMs have
> >>>     very poor network performance (around 7,01K/s).
> >>>
> >>>     On the servers itselfs there is no problem, i can download a file
> >>>     with wget at around 99 M/s.
> >>>
> >>>     Then i go to ovirt network configuration remove the bonding and then
> >>>     make the bonding again and the problem gets fixed (i have to do this
> >>>     everytime i reboot my blades).
> >>>
> >>> Have you tried to check the "Save network configuration" check box, or
> >>> clicking the button from the host's NICs  sub-tab?
> >>>
> >>> This should persist the configuration that you set on the host across
> >>> reboots..
> >>>
> >>>
> >>>     SERVER' s Software:
> >>>     CentOS 6.4 (64 bits) - 2.6.32-358.6.2.el6.x86_64
> >>>     Ovirt EL6 official rpms.
> >>>
> >>>     Anyone experienced this kind of problems?
> >>>
> >>>     Best regards,
> >>>     Ricardo Esteves.
> >>>
> >>>
> >>>
> >>>     _______________________________________________
> >>>     Users mailing list
> >>>Users at ovirt.org  <mailto:Users at ovirt.org>   <mailto:Users at ovirt.org>
> >>>http://lists.ovirt.org/mailman/listinfo/users
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Users mailing list
> >>>Users at ovirt.org  <mailto:Users at ovirt.org>   <mailto:Users at ovirt.org>
> >>>http://lists.ovirt.org/mailman/listinfo/users
> >>>
> >>
> >>
> >>
> >> _______________________________________________
> >> Users mailing list
> >>Users at ovirt.org  <mailto:Users at ovirt.org>
> >>http://lists.ovirt.org/mailman/listinfo/users
> >>
> >
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 



More information about the Users mailing list