[Users] Adding a bond.vlantag to ovirt-node

[Antoni Segura Puimedon]

----- Original Message -----
> From: "Alex Leonhardt" <alex.tuxx at gmail.com>
> To: "oVirt Mailing List" <users at ovirt.org>
> Sent: Wednesday, March 6, 2013 12:42:06 PM
> Subject: Re: [Users] Adding a bond.vlantag to ovirt-node
> 
> 
> 
> Sorry, the picture should actually say br2 :) ... have had to edit it
> to protect the real name(s) ...
> 
> Alex
> 
> 
> 
> 
> On 6 March 2013 11:39, Alex Leonhardt < alex.tuxx at gmail.com > wrote:
> 
> 
> 
> 
> 
> 
> 
> 
> All,
> 
> I've added manually a bond.<vlantag> to a Hyper-Visor, then added a
> bridge and slaved bond.<vlantag> to it.
> 
> I've upped the interfaces (no IPs), however ovirt-engine still wont
> allow me to add the new bridged interface. I did this yesterday, so
> I thought, maybe it's just a cache issue, however, it doesnt seem to
> update the HVs network config periodically ?

What does the engine say when you try to add it? The message could give
us a good hint.

> 
> What can I do to get this sorted ?? I dont want to have to restart
> the networking as VMs are running and needed.
> 
> FWIW, the setup looks like this -
> 
> 
> eth0
> | ----- bond0.111 --- br1
> | ----- bond0.112 --- ovirtmgmt
> 
> 
> eth1
> 
> 
> 
> 
> 
> the change was :
> 
> eth0
> | ----- bond0.111 --- br1
> | ----- bond0.112 --- ovirtmgmt
> | ----- bond0.113 --- br2
> eth1
> 
> 
> I then added "br2" to the ovirt-engine config, however, I'm not able
> to assign it to bond in the network config (web admin interface) for
> the hyper visor / host.
> 
> 
> 
> Also see screenshot attached.
> 
> 
> Thanks
> Alex
> 
> 
> 
> 
> --
> 
> 
> 
> | RHCE | Senior Systems Engineer | www.vcore.co |
> | www.vsearchcloud.com |
> 
> 
> 
> --
> 
> 
> 
> | RHCE | Senior Systems Engineer | www.vcore.co |
> | www.vsearchcloud.com |
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>