[Users] Problem install
Marcelo Barbosa
mr.marcelo.barbosa at gmail.com
Wed Mar 6 17:48:39 UTC 2013
hi guys,
I'am tryed install Ovirt 3.2 all-in-one in my Fedora 18, but this
version not finish for sucessful install, information my enviroment:
[root at firelap ovirt]# cat /etc/redhat-release
Fedora release 18 (Spherical Cow)
[root at firelap ovirt]# uname -a
Linux firelap 3.7.9-205.fc18.x86_64 #1 SMP Sun Feb 24 20:10:02 UTC 2013
x86_64 x86_64 x86_64 GNU/Linux
[root at firelap ovirt]# ifconfig
bond0: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500
ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
bond1: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500
ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
bond2: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500
ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
bond3: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500
ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
bond4: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500
ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 136972 bytes 54834621 (52.2 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 136972 bytes 54834621 (52.2 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
p5p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.255.43 netmask 255.255.255.192 broadcast 172.16.255.63
inet6 fe80::7a45:c4ff:feb0:8995 prefixlen 64 scopeid 0x20<link>
ether 78:45:c4:b0:89:95 txqueuelen 1000 (Ethernet)
RX packets 480681 bytes 614801393 (586.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 323373 bytes 35479386 (33.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 17
[root at firelap ovirt]# rpm -qa | grep ovirt
ovirt-engine-cli-3.2.0.10-1.fc18.noarch
ovirt-engine-backend-3.2.0-4.fc18.noarch
ovirt-engine-config-3.2.0-4.fc18.noarch
ovirt-host-deploy-1.0.0-1.fc18.noarch
ovirt-engine-setup-plugin-allinone-3.2.0-4.fc18.noarch
ovirt-engine-restapi-3.2.0-4.fc18.noarch
ovirt-engine-dbscripts-3.2.0-4.fc18.noarch
ovirt-image-uploader-3.2.0-1.fc18.noarch
ovirt-host-deploy-offline-1.0.0-1.fc18.noarch
ovirt-engine-setup-3.2.0-4.fc18.noarch
ovirt-release-fedora-5-3.noarch
ovirt-engine-tools-common-3.2.0-4.fc18.noarch
ovirt-engine-3.2.0-4.fc18.noarch
ovirt-log-collector-3.2.0-1.fc18.noarch
ovirt-host-deploy-java-1.0.0-1.fc18.noarch
ovirt-engine-userportal-3.2.0-4.fc18.noarch
ovirt-engine-notification-service-3.2.0-4.fc18.noarch
ovirt-iso-uploader-3.2.0-1.fc18.noarch
ovirt-engine-webadmin-portal-3.2.0-4.fc18.noarch
ovirt-engine-sdk-3.2.0.9-1.fc18.noarch
ovirt-engine-genericapi-3.2.0-4.fc18.noarch
[root at firelap ~]# host firelap.usc.unirede.net
firelap.usc.unirede.net has address 172.16.255.43
[root at firelap ~]# ping firelap.usc.unirede.net
PING firelap.usc.unirede.net (172.16.255.43) 56(84) bytes of data.
64 bytes from firelap (172.16.255.43): icmp_seq=1 ttl=64 time=0.055 ms
[root at firelap ~]# engine-setup
Welcome to oVirt Engine setup utility
oVirt Engine uses httpd to proxy requests to the application server.
It looks like the httpd installed locally is being actively used.
The installer can override current configuration .
Alternatively you can use JBoss directly (on ports higher than 1024)
Do you wish to override current httpd configuration and restart the
service? ['yes'| 'no'] [yes] :
HTTP Port [80] :
HTTPS Port [443] :
Host fully qualified domain name. Note: this name should be fully
resolvable [firelap.no-ip.org] : localhost.localdomain
The IP (127.0.0.1) which was resolved from the FQDN localhost.localdomain
is not configured on any interface on this host
User input failed validation, do you still wish to use it? (yes|no): no
Host fully qualified domain name. Note: this name should be fully
resolvable [firelap.no-ip.org] :
firelap.no-ip.org did not resolve into an IP address
User input failed validation, do you still wish to use it? (yes|no): no
Host fully qualified domain name. Note: this name should be fully
resolvable [firelap.no-ip.org] : firelap.usc.unirede.net
Enter a password for an internal oVirt Engine administrator user
(admin at internal) :
Warning: Weak Password.
Confirm password :
Organization Name for the Certificate [no-ip.org] : firelap.usc.unirede.net
The engine can be configured to present the UI in three different
application modes. virt [Manage virtualization only], gluster [Manage
gluster storage only], and both [Manage virtualization as well as gluster
storage] ['virt'| 'gluster'| 'both'] [both] :
The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'|
'POSIXFS'] [NFS] :
Enter DB type for installation ['remote'| 'local'] [local] :
Enter a password for a local oVirt Engine DB admin user (engine) :
Warning: Weak Password.
Confirm password :
Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso
Error: directory /firebackup/ovirt/iso is not empty
Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso
Firewall ports need to be opened.
The installer can configure firewall automatically overriding the current
configuration. The old configuration will be backed up.
Alternately you can configure the firewall later using an example file.
Which firewall do you wish to configure? ['None'| 'Firewalld'| 'IPTables']:
IPTables
Configure VDSM on this host? ['yes'| 'no'] [yes] :
Local storage domain path [/var/lib/images] : /firebackup/ovirt/vms
Confirm root password :
oVirt Engine will be installed using the following configuration:
=================================================================
override-httpd-config: yes
http-port: 80
https-port: 443
host-fqdn: firelap.usc.unirede.net
auth-pass: ********
org-name: firelap.usc.unirede.net
application-mode: both
default-dc-type: NFS
db-remote-install: local
db-local-pass: ********
nfs-mp: /firebackup/ovirt/iso
override-firewall: IPTables
config-allinone: yes
storage-path: /firebackup/ovirt/vms
superuser-pass: ********
Proceed with the configuration listed above? (yes|no): yes
Installing:
AIO: Validating CPU Compatibility... [ DONE ]
AIO: Adding firewall rules... [ DONE ]
Configuring oVirt Engine... [ DONE ]
Configuring JVM... [ DONE ]
Creating CA... [ DONE ]
Updating ovirt-engine service... [ DONE ]
Setting Database Configuration... [ DONE ]
Setting Database Security... [ DONE ]
Creating Database... [ DONE ]
Updating the Default Data Center Storage Type... [ DONE ]
Editing oVirt Engine Configuration... [ DONE ]
Editing Postgresql Configuration... [ DONE ]
Configuring the Default ISO Domain... [ DONE ]
Configuring Firewall... [ DONE ]
Starting ovirt-engine Service... [ DONE ]
Configuring HTTPD... [ DONE ]
AIO: Creating storage directory... [ DONE ]
AIO: Adding Local Datacenter and cluster... [ DONE ]
AIO: Adding Local host (This may take several minutes)... [ ERROR ]
Error: Host was found in a 'Failed' state. Please check engine and
bootstrap installation logs.
Please check log file
/var/log/ovirt-engine/engine-setup_2013_03_06_14_30_51.log for more
information
2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 0
2013-03-06 14:35:34::DEBUG::common_utils::1238::root:: stopping httpd
2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action
httpd on service stop
2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command -->
'/sbin/service httpd stop'
2013-03-06 14:35:34::DEBUG::common_utils::472::root:: output =
2013-03-06 14:35:34::DEBUG::common_utils::473::root:: stderr = Redirecting
to /bin/systemctl stop httpd.service
2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 0
2013-03-06 14:35:34::DEBUG::common_utils::1228::root:: starting httpd
2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action
httpd on service start
2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command -->
'/sbin/service httpd start'
2013-03-06 14:35:36::DEBUG::common_utils::472::root:: output =
2013-03-06 14:35:36::DEBUG::common_utils::473::root:: stderr = Redirecting
to /bin/systemctl start httpd.service
2013-03-06 14:35:36::DEBUG::common_utils::474::root:: retcode = 0
2013-03-06 14:35:36::DEBUG::setup_sequences::59::root:: running
makeStorageDir
2013-03-06 14:35:36::DEBUG::all_in_one_100::368::root:: Creating/Verifying
local domain path
2013-03-06 14:35:36::DEBUG::all_in_one_100::374::root:: Setting selinux
context
2013-03-06 14:35:36::DEBUG::nfsutils::36::root:: setting selinux context
for /firebackup/ovirt/vms
2013-03-06 14:35:36::DEBUG::common_utils::434::root:: Executing command -->
'/usr/sbin/semanage fcontext -a -t public_content_rw_t
/firebackup/ovirt/vms(/.*)?'
2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output =
2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr =
2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 0
2013-03-06 14:35:39::DEBUG::common_utils::434::root:: Executing command -->
'/sbin/restorecon -r /firebackup/ovirt/vms'
2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output =
2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr =
2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 0
2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running
waitForJbossUp
2013-03-06 14:35:39::DEBUG::all_in_one_100::445::root:: Checking JBoss
status.
2013-03-06 14:35:39::INFO::all_in_one_100::448::root:: JBoss is up and
running.
2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running initAPI
2013-03-06 14:35:39::DEBUG::all_in_one_100::240::root:: Initiating the API
object
2013-03-06 14:35:41::DEBUG::setup_sequences::59::root:: running createDC
2013-03-06 14:35:41::DEBUG::all_in_one_100::256::root:: Creating the local
datacenter
2013-03-06 14:35:42::DEBUG::setup_sequences::59::root:: running
createCluster
2013-03-06 14:35:42::DEBUG::all_in_one_100::267::root:: Creating the local
cluster
2013-03-06 14:35:43::DEBUG::setup_sequences::59::root:: running createHost
2013-03-06 14:35:43::DEBUG::all_in_one_100::280::root:: Adding the local
host
2013-03-06 14:35:44::DEBUG::setup_sequences::59::root:: running
waitForHostUp
2013-03-06 14:35:44::DEBUG::all_in_one_100::297::root:: Waiting for host to
become operational
2013-03-06 14:35:45::DEBUG::all_in_one_100::300::root:: current host status
is: installing
2013-03-06 14:35:45::DEBUG::all_in_one_100::311::root:: Traceback (most
recent call last):
File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
308, in isHostUp
raise Exception(INFO_CREATE_HOST_WAITING_UP)
Exception: Waiting for the host to start
2013-03-06 14:35:50::DEBUG::all_in_one_100::297::root:: Waiting for host to
become operational
2013-03-06 14:35:50::DEBUG::all_in_one_100::300::root:: current host status
is: installing
2013-03-06 14:35:50::DEBUG::all_in_one_100::311::root:: Traceback (most
recent call last):
File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
308, in isHostUp
raise Exception(INFO_CREATE_HOST_WAITING_UP)
Exception: Waiting for the host to start
2013-03-06 14:35:55::DEBUG::all_in_one_100::297::root:: Waiting for host to
become operational
2013-03-06 14:35:56::DEBUG::all_in_one_100::300::root:: current host status
is: install_failed
2013-03-06 14:35:56::DEBUG::all_in_one_100::311::root:: Traceback (most
recent call last):
File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
306, in isHostUp
raise utils.RetryFailException(ERROR_CREATE_HOST_FAILED)
RetryFailException: Error: Host was found in a 'Failed' state. Please check
engine and bootstrap installation logs.
2013-03-06 14:35:56::DEBUG::setup_sequences::62::root:: Traceback (most
recent call last):
File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in run
function()
File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
294, in waitForHostUp
utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in
retry
raise e
RetryFailException: Error: Host was found in a 'Failed' state. Please check
engine and bootstrap installation logs.
2013-03-06 14:35:56::DEBUG::engine-setup::1948::root:: *** The following
params were used as user input:
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root::
override-httpd-config: yes
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: http-port: 80
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: https-port: 443
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: random-passwords: no
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: mac-range:
00:1A:4A:10:FF:00-00:1A:4A:10:FF:FF
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: host-fqdn:
firelap.usc.unirede.net
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: auth-pass: ********
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: org-name:
firelap.usc.unirede.net
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: application-mode:
both
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: default-dc-type: NFS
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-remote-install:
local
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-host: localhost
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-local-pass:
********
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: nfs-mp:
/firebackup/********/iso
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: iso-domain-name:
ISO_DOMAIN
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-nfs: yes
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: override-firewall:
IPTables
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-allinone: yes
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: storage-path:
/firebackup/********/vms
2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: superuser-pass:
********
2013-03-06 14:35:56::ERROR::engine-setup::2369::root:: Traceback (most
recent call last):
File "/bin/engine-setup", line 2363, in <module>
main(confFile)
File "/bin/engine-setup", line 2146, in main
runSequences()
File "/bin/engine-setup", line 2068, in runSequences
controller.runAllSequences()
File "/usr/share/ovirt-engine/scripts/setup_controller.py", line 54, in
runAllSequences
sequence.run()
File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 154, in
run
step.run()
File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in run
function()
File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
294, in waitForHostUp
utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in
retry
raise e
RetryFailException: Error: Host was found in a 'Failed' state. Please check
engine and bootstrap installation logs.
Thnkz for attention.
Marcelo Barbosa
*mr.marcelo.barbosa at gmail.com*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130306/7212ea0f/attachment-0001.html>
More information about the Users
mailing list