[Users] Problem install

Marcelo Barbosa mr.marcelo.barbosa at gmail.com
Wed Mar 6 18:01:50 UTC 2013


Attached my log file.

Marcelo Barbosa
*mr.marcelo.barbosa at gmail.com*


On Wed, Mar 6, 2013 at 2:48 PM, Marcelo Barbosa <
mr.marcelo.barbosa at gmail.com> wrote:

> hi guys,
>
>    I'am tryed install Ovirt 3.2 all-in-one in my Fedora 18, but this
> version not finish for sucessful install, information my enviroment:
>
> [root at firelap ovirt]# cat /etc/redhat-release
> Fedora release 18 (Spherical Cow)
>
> [root at firelap ovirt]# uname -a
> Linux firelap 3.7.9-205.fc18.x86_64 #1 SMP Sun Feb 24 20:10:02 UTC 2013
> x86_64 x86_64 x86_64 GNU/Linux
>
> [root at firelap ovirt]# ifconfig
> bond0: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
> bond1: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
> bond2: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
> bond3: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
> bond4: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
> lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
>         inet 127.0.0.1  netmask 255.0.0.0
>         inet6 ::1  prefixlen 128  scopeid 0x10<host>
>         loop  txqueuelen 0  (Local Loopback)
>         RX packets 136972  bytes 54834621 (52.2 MiB)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 136972  bytes 54834621 (52.2 MiB)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
> p5p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>         inet 172.16.255.43  netmask 255.255.255.192  broadcast
> 172.16.255.63
>         inet6 fe80::7a45:c4ff:feb0:8995  prefixlen 64  scopeid 0x20<link>
>         ether 78:45:c4:b0:89:95  txqueuelen 1000  (Ethernet)
>         RX packets 480681  bytes 614801393 (586.3 MiB)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 323373  bytes 35479386 (33.8 MiB)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>         device interrupt 17
>
> [root at firelap ovirt]# rpm -qa | grep ovirt
> ovirt-engine-cli-3.2.0.10-1.fc18.noarch
> ovirt-engine-backend-3.2.0-4.fc18.noarch
> ovirt-engine-config-3.2.0-4.fc18.noarch
> ovirt-host-deploy-1.0.0-1.fc18.noarch
> ovirt-engine-setup-plugin-allinone-3.2.0-4.fc18.noarch
> ovirt-engine-restapi-3.2.0-4.fc18.noarch
> ovirt-engine-dbscripts-3.2.0-4.fc18.noarch
> ovirt-image-uploader-3.2.0-1.fc18.noarch
> ovirt-host-deploy-offline-1.0.0-1.fc18.noarch
> ovirt-engine-setup-3.2.0-4.fc18.noarch
> ovirt-release-fedora-5-3.noarch
> ovirt-engine-tools-common-3.2.0-4.fc18.noarch
> ovirt-engine-3.2.0-4.fc18.noarch
> ovirt-log-collector-3.2.0-1.fc18.noarch
> ovirt-host-deploy-java-1.0.0-1.fc18.noarch
> ovirt-engine-userportal-3.2.0-4.fc18.noarch
> ovirt-engine-notification-service-3.2.0-4.fc18.noarch
> ovirt-iso-uploader-3.2.0-1.fc18.noarch
> ovirt-engine-webadmin-portal-3.2.0-4.fc18.noarch
> ovirt-engine-sdk-3.2.0.9-1.fc18.noarch
> ovirt-engine-genericapi-3.2.0-4.fc18.noarch
>
> [root at firelap ~]# host firelap.usc.unirede.net
> firelap.usc.unirede.net has address 172.16.255.43
>
> [root at firelap ~]# ping firelap.usc.unirede.net
> PING firelap.usc.unirede.net (172.16.255.43) 56(84) bytes of data.
> 64 bytes from firelap (172.16.255.43): icmp_seq=1 ttl=64 time=0.055 ms
>
> [root at firelap ~]# engine-setup
> Welcome to oVirt Engine setup utility
> oVirt Engine uses httpd to proxy requests to the application server.
> It looks like the httpd installed locally is being actively used.
> The installer can override current configuration .
> Alternatively you can use JBoss directly (on ports higher than 1024)
> Do you wish to override current httpd configuration and restart the
> service? ['yes'| 'no']  [yes] :
> HTTP Port  [80] :
> HTTPS Port  [443] :
> Host fully qualified domain name. Note: this name should be fully
> resolvable  [firelap.no-ip.org] : localhost.localdomain
> The IP (127.0.0.1) which was resolved from the FQDN localhost.localdomain
> is not configured on any interface on this host
> User input failed validation, do you still wish to use it? (yes|no): no
> Host fully qualified domain name. Note: this name should be fully
> resolvable  [firelap.no-ip.org] :
> firelap.no-ip.org did not resolve into an IP address
> User input failed validation, do you still wish to use it? (yes|no): no
> Host fully qualified domain name. Note: this name should be fully
> resolvable  [firelap.no-ip.org] : firelap.usc.unirede.net
> Enter a password for an internal oVirt Engine administrator user
> (admin at internal) :
> Warning: Weak Password.
> Confirm password :
> Organization Name for the Certificate  [no-ip.org] :
> firelap.usc.unirede.net
> The engine can be configured to present the UI in three different
> application modes. virt [Manage virtualization only], gluster [Manage
> gluster storage only], and both [Manage virtualization as well as gluster
> storage] ['virt'| 'gluster'| 'both']  [both] :
> The default storage type you will be using  ['NFS'| 'FC'| 'ISCSI'|
> 'POSIXFS']  [NFS] :
> Enter DB type for installation ['remote'| 'local']  [local] :
> Enter a password for a local oVirt Engine DB admin user (engine) :
> Warning: Weak Password.
> Confirm password :
> Local ISO domain path  [/var/lib/exports/iso] : /firebackup/ovirt/iso
> Error: directory /firebackup/ovirt/iso is not empty
> Local ISO domain path  [/var/lib/exports/iso] : /firebackup/ovirt/iso
> Firewall ports need to be opened.
> The installer can configure firewall automatically overriding the current
> configuration. The old configuration will be backed up.
> Alternately you can configure the firewall later using an example file.
> Which firewall do you wish to configure? ['None'| 'Firewalld'|
> 'IPTables']: IPTables
> Configure VDSM on this host? ['yes'| 'no']  [yes] :
> Local storage domain path  [/var/lib/images] : /firebackup/ovirt/vms
> Confirm root password :
>
> oVirt Engine will be installed using the following configuration:
> =================================================================
> override-httpd-config:         yes
> http-port:                     80
> https-port:                    443
> host-fqdn:                     firelap.usc.unirede.net
> auth-pass:                     ********
> org-name:                      firelap.usc.unirede.net
> application-mode:              both
> default-dc-type:               NFS
> db-remote-install:             local
> db-local-pass:                 ********
> nfs-mp:                        /firebackup/ovirt/iso
> override-firewall:             IPTables
> config-allinone:               yes
> storage-path:                  /firebackup/ovirt/vms
> superuser-pass:                ********
> Proceed with the configuration listed above? (yes|no): yes
>
> Installing:
> AIO: Validating CPU Compatibility...                              [ DONE ]
> AIO: Adding firewall rules...                                     [ DONE ]
> Configuring oVirt Engine...                                       [ DONE ]
> Configuring JVM...                                                [ DONE ]
> Creating CA...                                                    [ DONE ]
> Updating ovirt-engine service...                                  [ DONE ]
> Setting Database Configuration...                                 [ DONE ]
> Setting Database Security...                                      [ DONE ]
> Creating Database...                                              [ DONE ]
> Updating the Default Data Center Storage Type...                  [ DONE ]
> Editing oVirt Engine Configuration...                             [ DONE ]
> Editing Postgresql Configuration...                               [ DONE ]
> Configuring the Default ISO Domain...                             [ DONE ]
> Configuring Firewall...                                           [ DONE ]
> Starting ovirt-engine Service...                                  [ DONE ]
> Configuring HTTPD...                                              [ DONE ]
> AIO: Creating storage directory...                                [ DONE ]
> AIO: Adding Local Datacenter and cluster...                       [ DONE ]
> AIO: Adding Local host (This may take several minutes)...      [ ERROR ]
> Error: Host was found in a 'Failed' state. Please check engine and
> bootstrap installation logs.
> Please check log file
> /var/log/ovirt-engine/engine-setup_2013_03_06_14_30_51.log for more
> information
>
> 2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 0
> 2013-03-06 14:35:34::DEBUG::common_utils::1238::root:: stopping httpd
> 2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action
> httpd on service stop
> 2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command
> --> '/sbin/service httpd stop'
> 2013-03-06 14:35:34::DEBUG::common_utils::472::root:: output =
> 2013-03-06 14:35:34::DEBUG::common_utils::473::root:: stderr = Redirecting
> to /bin/systemctl stop  httpd.service
>
> 2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 0
> 2013-03-06 14:35:34::DEBUG::common_utils::1228::root:: starting httpd
> 2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action
> httpd on service start
> 2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command
> --> '/sbin/service httpd start'
> 2013-03-06 14:35:36::DEBUG::common_utils::472::root:: output =
> 2013-03-06 14:35:36::DEBUG::common_utils::473::root:: stderr = Redirecting
> to /bin/systemctl start  httpd.service
>
> 2013-03-06 14:35:36::DEBUG::common_utils::474::root:: retcode = 0
> 2013-03-06 14:35:36::DEBUG::setup_sequences::59::root:: running
> makeStorageDir
> 2013-03-06 14:35:36::DEBUG::all_in_one_100::368::root:: Creating/Verifying
> local domain path
> 2013-03-06 14:35:36::DEBUG::all_in_one_100::374::root:: Setting selinux
> context
> 2013-03-06 14:35:36::DEBUG::nfsutils::36::root:: setting selinux context
> for /firebackup/ovirt/vms
> 2013-03-06 14:35:36::DEBUG::common_utils::434::root:: Executing command
> --> '/usr/sbin/semanage fcontext -a -t public_content_rw_t
> /firebackup/ovirt/vms(/.*)?'
> 2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output =
> 2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr =
> 2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 0
> 2013-03-06 14:35:39::DEBUG::common_utils::434::root:: Executing command
> --> '/sbin/restorecon -r /firebackup/ovirt/vms'
> 2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output =
> 2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr =
> 2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 0
> 2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running
> waitForJbossUp
> 2013-03-06 14:35:39::DEBUG::all_in_one_100::445::root:: Checking JBoss
> status.
> 2013-03-06 14:35:39::INFO::all_in_one_100::448::root:: JBoss is up and
> running.
> 2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running initAPI
> 2013-03-06 14:35:39::DEBUG::all_in_one_100::240::root:: Initiating the API
> object
> 2013-03-06 14:35:41::DEBUG::setup_sequences::59::root:: running createDC
> 2013-03-06 14:35:41::DEBUG::all_in_one_100::256::root:: Creating the local
> datacenter
> 2013-03-06 14:35:42::DEBUG::setup_sequences::59::root:: running
> createCluster
> 2013-03-06 14:35:42::DEBUG::all_in_one_100::267::root:: Creating the local
> cluster
> 2013-03-06 14:35:43::DEBUG::setup_sequences::59::root:: running createHost
> 2013-03-06 14:35:43::DEBUG::all_in_one_100::280::root:: Adding the local
> host
> 2013-03-06 14:35:44::DEBUG::setup_sequences::59::root:: running
> waitForHostUp
> 2013-03-06 14:35:44::DEBUG::all_in_one_100::297::root:: Waiting for host
> to become operational
> 2013-03-06 14:35:45::DEBUG::all_in_one_100::300::root:: current host
> status is: installing
> 2013-03-06 14:35:45::DEBUG::all_in_one_100::311::root:: Traceback (most
> recent call last):
>   File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
> 308, in isHostUp
>     raise Exception(INFO_CREATE_HOST_WAITING_UP)
> Exception: Waiting for the host to start
>
> 2013-03-06 14:35:50::DEBUG::all_in_one_100::297::root:: Waiting for host
> to become operational
> 2013-03-06 14:35:50::DEBUG::all_in_one_100::300::root:: current host
> status is: installing
> 2013-03-06 14:35:50::DEBUG::all_in_one_100::311::root:: Traceback (most
> recent call last):
>   File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
> 308, in isHostUp
>     raise Exception(INFO_CREATE_HOST_WAITING_UP)
> Exception: Waiting for the host to start
>
> 2013-03-06 14:35:55::DEBUG::all_in_one_100::297::root:: Waiting for host
> to become operational
> 2013-03-06 14:35:56::DEBUG::all_in_one_100::300::root:: current host
> status is: install_failed
> 2013-03-06 14:35:56::DEBUG::all_in_one_100::311::root:: Traceback (most
> recent call last):
>   File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
> 306, in isHostUp
>     raise utils.RetryFailException(ERROR_CREATE_HOST_FAILED)
> RetryFailException: Error: Host was found in a 'Failed' state. Please
> check engine and bootstrap installation logs.
>
> 2013-03-06 14:35:56::DEBUG::setup_sequences::62::root:: Traceback (most
> recent call last):
>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in
> run
>     function()
>   File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
> 294, in waitForHostUp
>     utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>   File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in
> retry
>     raise e
> RetryFailException: Error: Host was found in a 'Failed' state. Please
> check engine and bootstrap installation logs.
>
> 2013-03-06 14:35:56::DEBUG::engine-setup::1948::root:: *** The following
> params were used as user input:
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root::
> override-httpd-config: yes
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: http-port: 80
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: https-port: 443
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: random-passwords: no
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: mac-range:
> 00:1A:4A:10:FF:00-00:1A:4A:10:FF:FF
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: host-fqdn:
> firelap.usc.unirede.net
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: auth-pass: ********
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: org-name:
> firelap.usc.unirede.net
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: application-mode:
> both
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: default-dc-type: NFS
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-remote-install:
> local
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-host: localhost
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-local-pass:
> ********
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: nfs-mp:
> /firebackup/********/iso
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: iso-domain-name:
> ISO_DOMAIN
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-nfs: yes
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: override-firewall:
> IPTables
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-allinone: yes
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: storage-path:
> /firebackup/********/vms
> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: superuser-pass:
> ********
> 2013-03-06 14:35:56::ERROR::engine-setup::2369::root:: Traceback (most
> recent call last):
>   File "/bin/engine-setup", line 2363, in <module>
>     main(confFile)
>   File "/bin/engine-setup", line 2146, in main
>     runSequences()
>   File "/bin/engine-setup", line 2068, in runSequences
>     controller.runAllSequences()
>   File "/usr/share/ovirt-engine/scripts/setup_controller.py", line 54, in
> runAllSequences
>     sequence.run()
>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 154, in
> run
>     step.run()
>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in
> run
>     function()
>   File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
> 294, in waitForHostUp
>     utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>   File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in
> retry
>     raise e
> RetryFailException: Error: Host was found in a 'Failed' state. Please
> check engine and bootstrap installation logs.
>
>    Thnkz for attention.
>
> Marcelo Barbosa
> *mr.marcelo.barbosa at gmail.com*
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130306/06372899/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: engine-setup_2013_03_06_14_30_51.log
Type: application/octet-stream
Size: 132977 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130306/06372899/attachment-0001.obj>


More information about the Users mailing list