[Users] Problem install
Alexandre Santos
santosam72 at gmail.com
Wed Mar 6 19:23:49 UTC 2013
Hi. Have you tried solving the hostnames resolving issues that are
described on your email? Add the hosts to /etc/hosts
Alex
No dia 06/03/2013 18:02, "Marcelo Barbosa" <mr.marcelo.barbosa at gmail.com>
escreveu:
> Attached my log file.
>
> Marcelo Barbosa
> *mr.marcelo.barbosa at gmail.com*
>
>
> On Wed, Mar 6, 2013 at 2:48 PM, Marcelo Barbosa <
> mr.marcelo.barbosa at gmail.com> wrote:
>
>> hi guys,
>>
>> I'am tryed install Ovirt 3.2 all-in-one in my Fedora 18, but this
>> version not finish for sucessful install, information my enviroment:
>>
>> [root at firelap ovirt]# cat /etc/redhat-release
>> Fedora release 18 (Spherical Cow)
>>
>> [root at firelap ovirt]# uname -a
>> Linux firelap 3.7.9-205.fc18.x86_64 #1 SMP Sun Feb 24 20:10:02 UTC 2013
>> x86_64 x86_64 x86_64 GNU/Linux
>>
>> [root at firelap ovirt]# ifconfig
>> bond0: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500
>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>> RX packets 0 bytes 0 (0.0 B)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 0 bytes 0 (0.0 B)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> bond1: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500
>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>> RX packets 0 bytes 0 (0.0 B)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 0 bytes 0 (0.0 B)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> bond2: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500
>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>> RX packets 0 bytes 0 (0.0 B)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 0 bytes 0 (0.0 B)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> bond3: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500
>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>> RX packets 0 bytes 0 (0.0 B)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 0 bytes 0 (0.0 B)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> bond4: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500
>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>> RX packets 0 bytes 0 (0.0 B)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 0 bytes 0 (0.0 B)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
>> inet 127.0.0.1 netmask 255.0.0.0
>> inet6 ::1 prefixlen 128 scopeid 0x10<host>
>> loop txqueuelen 0 (Local Loopback)
>> RX packets 136972 bytes 54834621 (52.2 MiB)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 136972 bytes 54834621 (52.2 MiB)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> p5p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
>> inet 172.16.255.43 netmask 255.255.255.192 broadcast
>> 172.16.255.63
>> inet6 fe80::7a45:c4ff:feb0:8995 prefixlen 64 scopeid 0x20<link>
>> ether 78:45:c4:b0:89:95 txqueuelen 1000 (Ethernet)
>> RX packets 480681 bytes 614801393 (586.3 MiB)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 323373 bytes 35479386 (33.8 MiB)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>> device interrupt 17
>>
>> [root at firelap ovirt]# rpm -qa | grep ovirt
>> ovirt-engine-cli-3.2.0.10-1.fc18.noarch
>> ovirt-engine-backend-3.2.0-4.fc18.noarch
>> ovirt-engine-config-3.2.0-4.fc18.noarch
>> ovirt-host-deploy-1.0.0-1.fc18.noarch
>> ovirt-engine-setup-plugin-allinone-3.2.0-4.fc18.noarch
>> ovirt-engine-restapi-3.2.0-4.fc18.noarch
>> ovirt-engine-dbscripts-3.2.0-4.fc18.noarch
>> ovirt-image-uploader-3.2.0-1.fc18.noarch
>> ovirt-host-deploy-offline-1.0.0-1.fc18.noarch
>> ovirt-engine-setup-3.2.0-4.fc18.noarch
>> ovirt-release-fedora-5-3.noarch
>> ovirt-engine-tools-common-3.2.0-4.fc18.noarch
>> ovirt-engine-3.2.0-4.fc18.noarch
>> ovirt-log-collector-3.2.0-1.fc18.noarch
>> ovirt-host-deploy-java-1.0.0-1.fc18.noarch
>> ovirt-engine-userportal-3.2.0-4.fc18.noarch
>> ovirt-engine-notification-service-3.2.0-4.fc18.noarch
>> ovirt-iso-uploader-3.2.0-1.fc18.noarch
>> ovirt-engine-webadmin-portal-3.2.0-4.fc18.noarch
>> ovirt-engine-sdk-3.2.0.9-1.fc18.noarch
>> ovirt-engine-genericapi-3.2.0-4.fc18.noarch
>>
>> [root at firelap ~]# host firelap.usc.unirede.net
>> firelap.usc.unirede.net has address 172.16.255.43
>>
>> [root at firelap ~]# ping firelap.usc.unirede.net
>> PING firelap.usc.unirede.net (172.16.255.43) 56(84) bytes of data.
>> 64 bytes from firelap (172.16.255.43): icmp_seq=1 ttl=64 time=0.055 ms
>>
>> [root at firelap ~]# engine-setup
>> Welcome to oVirt Engine setup utility
>> oVirt Engine uses httpd to proxy requests to the application server.
>> It looks like the httpd installed locally is being actively used.
>> The installer can override current configuration .
>> Alternatively you can use JBoss directly (on ports higher than 1024)
>> Do you wish to override current httpd configuration and restart the
>> service? ['yes'| 'no'] [yes] :
>> HTTP Port [80] :
>> HTTPS Port [443] :
>> Host fully qualified domain name. Note: this name should be fully
>> resolvable [firelap.no-ip.org] : localhost.localdomain
>> The IP (127.0.0.1) which was resolved from the FQDN localhost.localdomain
>> is not configured on any interface on this host
>> User input failed validation, do you still wish to use it? (yes|no): no
>> Host fully qualified domain name. Note: this name should be fully
>> resolvable [firelap.no-ip.org] :
>> firelap.no-ip.org did not resolve into an IP address
>> User input failed validation, do you still wish to use it? (yes|no): no
>> Host fully qualified domain name. Note: this name should be fully
>> resolvable [firelap.no-ip.org] : firelap.usc.unirede.net
>> Enter a password for an internal oVirt Engine administrator user
>> (admin at internal) :
>> Warning: Weak Password.
>> Confirm password :
>> Organization Name for the Certificate [no-ip.org] :
>> firelap.usc.unirede.net
>> The engine can be configured to present the UI in three different
>> application modes. virt [Manage virtualization only], gluster [Manage
>> gluster storage only], and both [Manage virtualization as well as gluster
>> storage] ['virt'| 'gluster'| 'both'] [both] :
>> The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'|
>> 'POSIXFS'] [NFS] :
>> Enter DB type for installation ['remote'| 'local'] [local] :
>> Enter a password for a local oVirt Engine DB admin user (engine) :
>> Warning: Weak Password.
>> Confirm password :
>> Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso
>> Error: directory /firebackup/ovirt/iso is not empty
>> Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso
>> Firewall ports need to be opened.
>> The installer can configure firewall automatically overriding the current
>> configuration. The old configuration will be backed up.
>> Alternately you can configure the firewall later using an example file.
>> Which firewall do you wish to configure? ['None'| 'Firewalld'|
>> 'IPTables']: IPTables
>> Configure VDSM on this host? ['yes'| 'no'] [yes] :
>> Local storage domain path [/var/lib/images] : /firebackup/ovirt/vms
>> Confirm root password :
>>
>> oVirt Engine will be installed using the following configuration:
>> =================================================================
>> override-httpd-config: yes
>> http-port: 80
>> https-port: 443
>> host-fqdn: firelap.usc.unirede.net
>> auth-pass: ********
>> org-name: firelap.usc.unirede.net
>> application-mode: both
>> default-dc-type: NFS
>> db-remote-install: local
>> db-local-pass: ********
>> nfs-mp: /firebackup/ovirt/iso
>> override-firewall: IPTables
>> config-allinone: yes
>> storage-path: /firebackup/ovirt/vms
>> superuser-pass: ********
>> Proceed with the configuration listed above? (yes|no): yes
>>
>> Installing:
>> AIO: Validating CPU Compatibility... [ DONE ]
>> AIO: Adding firewall rules... [ DONE ]
>> Configuring oVirt Engine... [ DONE ]
>> Configuring JVM... [ DONE ]
>> Creating CA... [ DONE ]
>> Updating ovirt-engine service... [ DONE ]
>> Setting Database Configuration... [ DONE ]
>> Setting Database Security... [ DONE ]
>> Creating Database... [ DONE ]
>> Updating the Default Data Center Storage Type... [ DONE ]
>> Editing oVirt Engine Configuration... [ DONE ]
>> Editing Postgresql Configuration... [ DONE ]
>> Configuring the Default ISO Domain... [ DONE ]
>> Configuring Firewall... [ DONE ]
>> Starting ovirt-engine Service... [ DONE ]
>> Configuring HTTPD... [ DONE ]
>> AIO: Creating storage directory... [ DONE ]
>> AIO: Adding Local Datacenter and cluster... [ DONE ]
>> AIO: Adding Local host (This may take several minutes)... [ ERROR ]
>> Error: Host was found in a 'Failed' state. Please check engine and
>> bootstrap installation logs.
>> Please check log file
>> /var/log/ovirt-engine/engine-setup_2013_03_06_14_30_51.log for more
>> information
>>
>> 2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 0
>> 2013-03-06 14:35:34::DEBUG::common_utils::1238::root:: stopping httpd
>> 2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action
>> httpd on service stop
>> 2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command
>> --> '/sbin/service httpd stop'
>> 2013-03-06 14:35:34::DEBUG::common_utils::472::root:: output =
>> 2013-03-06 14:35:34::DEBUG::common_utils::473::root:: stderr =
>> Redirecting to /bin/systemctl stop httpd.service
>>
>> 2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 0
>> 2013-03-06 14:35:34::DEBUG::common_utils::1228::root:: starting httpd
>> 2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action
>> httpd on service start
>> 2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command
>> --> '/sbin/service httpd start'
>> 2013-03-06 14:35:36::DEBUG::common_utils::472::root:: output =
>> 2013-03-06 14:35:36::DEBUG::common_utils::473::root:: stderr =
>> Redirecting to /bin/systemctl start httpd.service
>>
>> 2013-03-06 14:35:36::DEBUG::common_utils::474::root:: retcode = 0
>> 2013-03-06 14:35:36::DEBUG::setup_sequences::59::root:: running
>> makeStorageDir
>> 2013-03-06 14:35:36::DEBUG::all_in_one_100::368::root::
>> Creating/Verifying local domain path
>> 2013-03-06 14:35:36::DEBUG::all_in_one_100::374::root:: Setting selinux
>> context
>> 2013-03-06 14:35:36::DEBUG::nfsutils::36::root:: setting selinux context
>> for /firebackup/ovirt/vms
>> 2013-03-06 14:35:36::DEBUG::common_utils::434::root:: Executing command
>> --> '/usr/sbin/semanage fcontext -a -t public_content_rw_t
>> /firebackup/ovirt/vms(/.*)?'
>> 2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output =
>> 2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr =
>> 2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 0
>> 2013-03-06 14:35:39::DEBUG::common_utils::434::root:: Executing command
>> --> '/sbin/restorecon -r /firebackup/ovirt/vms'
>> 2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output =
>> 2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr =
>> 2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 0
>> 2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running
>> waitForJbossUp
>> 2013-03-06 14:35:39::DEBUG::all_in_one_100::445::root:: Checking JBoss
>> status.
>> 2013-03-06 14:35:39::INFO::all_in_one_100::448::root:: JBoss is up and
>> running.
>> 2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running initAPI
>> 2013-03-06 14:35:39::DEBUG::all_in_one_100::240::root:: Initiating the
>> API object
>> 2013-03-06 14:35:41::DEBUG::setup_sequences::59::root:: running createDC
>> 2013-03-06 14:35:41::DEBUG::all_in_one_100::256::root:: Creating the
>> local datacenter
>> 2013-03-06 14:35:42::DEBUG::setup_sequences::59::root:: running
>> createCluster
>> 2013-03-06 14:35:42::DEBUG::all_in_one_100::267::root:: Creating the
>> local cluster
>> 2013-03-06 14:35:43::DEBUG::setup_sequences::59::root:: running createHost
>> 2013-03-06 14:35:43::DEBUG::all_in_one_100::280::root:: Adding the local
>> host
>> 2013-03-06 14:35:44::DEBUG::setup_sequences::59::root:: running
>> waitForHostUp
>> 2013-03-06 14:35:44::DEBUG::all_in_one_100::297::root:: Waiting for host
>> to become operational
>> 2013-03-06 14:35:45::DEBUG::all_in_one_100::300::root:: current host
>> status is: installing
>> 2013-03-06 14:35:45::DEBUG::all_in_one_100::311::root:: Traceback (most
>> recent call last):
>> File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
>> 308, in isHostUp
>> raise Exception(INFO_CREATE_HOST_WAITING_UP)
>> Exception: Waiting for the host to start
>>
>> 2013-03-06 14:35:50::DEBUG::all_in_one_100::297::root:: Waiting for host
>> to become operational
>> 2013-03-06 14:35:50::DEBUG::all_in_one_100::300::root:: current host
>> status is: installing
>> 2013-03-06 14:35:50::DEBUG::all_in_one_100::311::root:: Traceback (most
>> recent call last):
>> File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
>> 308, in isHostUp
>> raise Exception(INFO_CREATE_HOST_WAITING_UP)
>> Exception: Waiting for the host to start
>>
>> 2013-03-06 14:35:55::DEBUG::all_in_one_100::297::root:: Waiting for host
>> to become operational
>> 2013-03-06 14:35:56::DEBUG::all_in_one_100::300::root:: current host
>> status is: install_failed
>> 2013-03-06 14:35:56::DEBUG::all_in_one_100::311::root:: Traceback (most
>> recent call last):
>> File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
>> 306, in isHostUp
>> raise utils.RetryFailException(ERROR_CREATE_HOST_FAILED)
>> RetryFailException: Error: Host was found in a 'Failed' state. Please
>> check engine and bootstrap installation logs.
>>
>> 2013-03-06 14:35:56::DEBUG::setup_sequences::62::root:: Traceback (most
>> recent call last):
>> File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in
>> run
>> function()
>> File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
>> 294, in waitForHostUp
>> utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>> File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in
>> retry
>> raise e
>> RetryFailException: Error: Host was found in a 'Failed' state. Please
>> check engine and bootstrap installation logs.
>>
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1948::root:: *** The following
>> params were used as user input:
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root::
>> override-httpd-config: yes
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: http-port: 80
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: https-port: 443
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: random-passwords:
>> no
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: mac-range:
>> 00:1A:4A:10:FF:00-00:1A:4A:10:FF:FF
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: host-fqdn:
>> firelap.usc.unirede.net
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: auth-pass: ********
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: org-name:
>> firelap.usc.unirede.net
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: application-mode:
>> both
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: default-dc-type:
>> NFS
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-remote-install:
>> local
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-host: localhost
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-local-pass:
>> ********
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: nfs-mp:
>> /firebackup/********/iso
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: iso-domain-name:
>> ISO_DOMAIN
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-nfs: yes
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: override-firewall:
>> IPTables
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-allinone:
>> yes
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: storage-path:
>> /firebackup/********/vms
>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: superuser-pass:
>> ********
>> 2013-03-06 14:35:56::ERROR::engine-setup::2369::root:: Traceback (most
>> recent call last):
>> File "/bin/engine-setup", line 2363, in <module>
>> main(confFile)
>> File "/bin/engine-setup", line 2146, in main
>> runSequences()
>> File "/bin/engine-setup", line 2068, in runSequences
>> controller.runAllSequences()
>> File "/usr/share/ovirt-engine/scripts/setup_controller.py", line 54, in
>> runAllSequences
>> sequence.run()
>> File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 154, in
>> run
>> step.run()
>> File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in
>> run
>> function()
>> File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
>> 294, in waitForHostUp
>> utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>> File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in
>> retry
>> raise e
>> RetryFailException: Error: Host was found in a 'Failed' state. Please
>> check engine and bootstrap installation logs.
>>
>> Thnkz for attention.
>>
>> Marcelo Barbosa
>> *mr.marcelo.barbosa at gmail.com*
>>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130306/2faf9b58/attachment-0001.html>
More information about the Users
mailing list