[Users] install a f18 host with ovirtmgmt vlan tagged

[Gianluca Cecchi]

Hello,
engine f18 3.2 stable.
I try to install a host in a new DC where I only configured ovirtmgmt
network as vlan tagged with vlan id 65

Install fails with this error in
/var/log/ovirt-engine/host-deploy/ovirt-20130307154915-10.4.4.57.log

...
2013-03-07 15:49:15 ERROR otopi.context context._executeMethod:139
Failed to execute stage 'Setup validation': Interface em3.65 is VLAN
interface However its configuration is unexpected
..

On fedora18 host I have NetworkManger disabled and network enabled.
At the moment the only adapter that starts on the system is em3 and
its vlan counterpart em3.65, with these conf files:

# cat ifcfg-em3
DEVICE=em3
HWADDR=00:1C:C4:AB:89:0F
TYPE=Ethernet
BOOTPROTO=none
IPV6INIT=no
UUID=0675d8c1-858e-4819-9c65-4ff5f63587b7
ONBOOT=yes
NM_CONTROLLED=no

# cat ifcfg-em3.65
DEVICE=em3.65
ONBOOT=yes
BOOTPROTO=none
VLAN=yes
IPADDR=10.4.4.57
NETMASK=255.255.255.0
GATEWAY=10.4.4.250
NM_CONTROLLED=no

How should I configure the host at the beginning to have ovirtmgmt
configured as VLAN tagged and host deploy with no complain?

Thanks in advance,
Gianluca