[Users] ovirt 3.2 all-in-one setup always fails

Alex Leonhardt alex.tuxx at gmail.com
Mon Mar 11 21:11:46 UTC 2013


Hi Alex / all -


Anyone experienced the same when installing 3.2 all-in-one on centos 6.3 
? I really need this working ...


Thanks
Alex


On 03/10/2013 02:26 PM, Alex Leonhardt wrote:
> Hi Alex,
>
> Regarding the dependencies - libvirtd would not start w/o having 
> messagebus / avahi-daemon installed & running, however, it doesnt seem 
> to come up as an dependency when installing libvirtd (otherwise it 
> would have been installed previously) ?
>
> I read this "solution" on some blog page, and based on that installed 
> avahi-daemon & messagebus + started them, only then libvirtd started 
> up. vdsmd wont tell you it's waiting for libvirtd to start on the 
> console, it'll mention in the log that "it's waiting for libvirtd" and 
> eventually will time out.
>
> Thanks,
> Alex
>
> On 03/10/2013 10:19 AM, Alex Lourie wrote:
>> On Fri 08 Mar 2013 04:33:53 PM IST, Alex Leonhardt wrote:
>>>
>>> Also, the there seem to be missing some dependencies for
>>>
>>> - messagebus (service not enabled/started/installed)
>>> - avahi-daemon (wasnt installed, had to install and start / enable)
>>>
>>> else
>>>
>>> libvirtd   will not start and the setup will fail.
>>>
>>>
>>>
>>>
>>> On 8 March 2013 14:30, Alex Leonhardt <alex.tuxx at gmail.com
>>> <mailto:alex.tuxx at gmail.com>> wrote:
>>>
>>>     And here from when I tried to use "localhost" as the host / fqdn :
>>>
>>>
>>>     Installing:
>>>     AIO: Validating CPU Compatibility...
>>>     [ DONE ]
>>>     AIO: Adding firewall rules...
>>>     [ DONE ]
>>>     Configuring oVirt Engine...
>>>     [ DONE ]
>>>     Configuring JVM...
>>>     [ DONE ]
>>>     Creating CA...
>>>     [ DONE ]
>>>     Updating ovirt-engine service...
>>>     [ DONE ]
>>>     Setting Database Configuration...
>>>     [ DONE ]
>>>     Setting Database Security...
>>>     [ DONE ]
>>>     Creating Database...
>>>     [ DONE ]
>>>     Updating the Default Data Center Storage Type...
>>>     [ DONE ]
>>>     Editing oVirt Engine Configuration...
>>>     [ DONE ]
>>>     Editing Postgresql Configuration...
>>>     [ DONE ]
>>>     Configuring the Default ISO Domain...
>>>     [ DONE ]
>>>     Configuring Firewall...
>>>     [ DONE ]
>>>     Starting ovirt-engine Service...
>>>     [ DONE ]
>>>     Configuring HTTPD...
>>>     [ DONE ]
>>>     AIO: Creating storage directory...
>>>     [ DONE ]
>>>     AIO: Adding Local Datacenter and cluster...
>>>     [ DONE ]
>>>     AIO: Adding Local host (This may take several minutes)...      [
>>>     ERROR ]
>>>     Error: Host was found in a 'Failed' state. Please check engine and
>>>     bootstrap installation logs.
>>>     Please check log file
>>>     /var/log/ovirt-engine/engine-setup_2013_03_08_14_10_56.log for
>>>     more information
>>>     Exception in thread libvirtEventLoop (most likely raised during
>>>     interpreter shutdown)
>>>
>>>     #########
>>>
>>>
>>>     2013-03-08 14:13:33::DEBUG::setup_sequences::59::root:: running
>>>     _loadFilesToIsoDomain
>>>     2013-03-08 14:13:33::ERROR::engine-setup::1838::root:: Traceback
>>>     (most recent call last):
>>>       File "/usr/bin/engine-setup", line 1835, in _loadFilesToIsoDomain
>>>         utils.copyFile(filename, targetPath, basedefs.CONST_VDSM_UID,
>>>     basedefs.CONST_KVM_GID)
>>>       File "/usr/share/ovirt-engine/scripts/common_utils.py", line
>>>     706, in copyFile
>>>         shutil.copy2(fileSrc, destination)
>>>       File "/usr/lib64/python2.6/shutil.py", line 95, in copy2
>>>         copyfile(src, dst)
>>>       File "/usr/lib64/python2.6/shutil.py", line 50, in copyfile
>>>         with open(src, 'rb') as fsrc:
>>>     IOError: [Errno 2] No such file or directory:
>>>     '/usr/share/virtio-win/virtio-win.vfd'
>>>
>>>     2013-03-08 14:13:33::ERROR::engine-setup::1839::root:: Failed to
>>>     copy files to iso domain
>>>
>>>
>>>     [snip]
>>>
>>>     2013-03-08 14:14:14::DEBUG::setup_sequences::59::root:: running
>>>     waitForHostUp
>>>     2013-03-08 14:14:14::DEBUG::all_in_one_100::303::root:: Waiting
>>>     for host to become operational
>>>     2013-03-08 14:14:14::DEBUG::all_in_one_100::306::root:: current
>>>     host status is: installing
>>>     2013-03-08 14:14:14::DEBUG::all_in_one_100::317::root:: Traceback
>>>     (most recent call last):
>>>
>>>       File
>>>     "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
>>>     314, in isHostUp
>>>         raise Exception(INFO_CREATE_HOST_WAITING_UP)
>>>     Exception: Waiting for the host to start
>>>
>>>     2013-03-08 14:14:19::DEBUG::all_in_one_100::303::root:: Waiting
>>>     for host to become operational
>>>     2013-03-08 14:14:19::DEBUG::all_in_one_100::306::root:: current
>>>     host status is: install_failed
>>>     2013-03-08 14:14:19::DEBUG::all_in_one_100::317::root:: Traceback
>>>     (most recent call last):
>>>
>>>       File
>>>     "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
>>>     312, in isHostUp
>>>         raise utils.RetryFailException(ERROR_CREATE_HOST_FAILED)
>>>     RetryFailException: Error: Host was found in a 'Failed' state.
>>>     Please check engine and bootstrap installation logs.
>>>
>>>     2013-03-08 14:14:19::DEBUG::setup_sequences::62::root:: Traceback
>>>     (most recent call last):
>>>
>>>       File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line
>>>     60, in run
>>>         function()
>>>       File
>>>     "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
>>>     300, in waitForHostUp
>>>         utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>>>       File "/usr/share/ovirt-engine/scripts/common_utils.py", line
>>>     1010, in retry
>>>         raise e
>>>     RetryFailException: Error: Host was found in a 'Failed' state.
>>>     Please check engine and bootstrap installation logs.
>>>
>>>
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1934::root:: *** The
>>>     following params were used as user input:
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     override-httpd-config: yes
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> http-port: 80
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> https-port: 443
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     random-passwords: no
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: mac-range:
>>>     00:1A:4A:A8:14:00-00:1A:4A:A8:14:FF
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: host-fqdn:
>>>     localhost
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: auth-pass:
>>>     ********
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: org-name:
>>>     BrightTALK
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     application-mode: both
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     default-dc-type: NFS
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     db-remote-install: local
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: db-host:
>>>     localhost
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     db-local-pass: ********
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: nfs-mp:
>>>     /exports/iso
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     iso-domain-name: ISO_DOMAIN
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> config-nfs: yes
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     override-firewall: None
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     config-allinone: yes
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     storage-path: /vmfs
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root::
>>>     superuser-pass: ********
>>>     2013-03-08 14:14:19::ERROR::engine-setup::2355::root:: Traceback
>>>     (most recent call last):
>>>       File "/usr/bin/engine-setup", line 2349, in <module>
>>>         main(confFile)
>>>       File "/usr/bin/engine-setup", line 2132, in main
>>>         runSequences()
>>>       File "/usr/bin/engine-setup", line 2054, in runSequences
>>>         controller.runAllSequences()
>>>       File "/usr/share/ovirt-engine/scripts/setup_controller.py", line
>>>     54, in runAllSequences
>>>         sequence.run()
>>>       File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line
>>>     154, in run
>>>         step.run()
>>>
>>>       File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line
>>>     60, in run
>>>         function()
>>>       File
>>>     "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line
>>>     300, in waitForHostUp
>>>         utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>>>       File "/usr/share/ovirt-engine/scripts/common_utils.py", line
>>>     1010, in retry
>>>         raise e
>>>     RetryFailException: Error: Host was found in a 'Failed' state.
>>>     Please check engine and bootstrap installation logs.
>>>
>>>
>>>
>>>     On 8 March 2013 14:27, Alex Leonhardt <alex.tuxx at gmail.com
>>> <mailto:alex.tuxx at gmail.com>> wrote:
>>>
>>>         Hi,
>>>
>>>         The setup keeps failing at "waitforhostup" with :
>>>
>>>
>>>         Installing:
>>>         AIO: Validating CPU
>>>         Compatibility...                              [ DONE ]
>>>         AIO: Adding firewall
>>>         rules...                                     [ DONE ]
>>>         Configuring oVirt
>>>         Engine...                                       [ DONE ]
>>>         Configuring
>>>         JVM...                                                [ DONE ]
>>>         Creating
>>>         CA...                                                    [ 
>>> DONE ]
>>>         Updating ovirt-engine
>>>         service...                                  [ DONE ]
>>>         Setting Database
>>>         Configuration...                                 [ DONE ]
>>>         Setting Database
>>>         Security...                                      [ DONE ]
>>>         Creating
>>>         Database...                                              [ 
>>> DONE ]
>>>         Updating the Default Data Center Storage
>>>         Type...                  [ DONE ]
>>>         Editing oVirt Engine
>>>         Configuration...                             [ DONE ]
>>>         Editing Postgresql
>>>         Configuration...                               [ DONE ]
>>>         Configuring the Default ISO
>>>         Domain...                             [ DONE ]
>>>         Configuring
>>>         Firewall...                                           [ DONE ]
>>>         Starting ovirt-engine
>>>         Service...                                  [ DONE ]
>>>         Configuring
>>>         HTTPD...                                              [ DONE ]
>>>         AIO: Creating storage
>>>         directory...                                [ DONE ]
>>>         AIO: Adding Local Datacenter and
>>>         cluster...                       [ DONE ]
>>>         AIO: Adding Local host (This may take several minutes)...
>>>         [ ERROR ]
>>>         Error: Host was found in a 'Failed' state. Please check engine
>>>         and bootstrap installation logs.
>>>         Please check log file
>>>         /var/log/ovirt-engine/engine-setup_2013_03_08_14_17_42.log for
>>>         more information
>>>
>>>         #####
>>>
>>>         2013-03-08 14:22:43::DEBUG::setup_sequences::59::root::
>>>         running waitForHostUp
>>>         2013-03-08 14:22:43::DEBUG::all_in_one_100::303::root::
>>>         Waiting for host to become operational
>>>         2013-03-08 14:22:43::DEBUG::all_in_one_100::306::root::
>>>         current host status is: installing
>>>         2013-03-08 14:22:43::DEBUG::all_in_one_100::317::root::
>>>         Traceback (most recent call last):
>>>           File
>>>         "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py",
>>>         line 314, in isHostUp
>>>             raise Exception(INFO_CREATE_HOST_WAITING_UP)
>>>         Exception: Waiting for the host to start
>>>
>>>         2013-03-08 14:22:48::DEBUG::all_in_one_100::303::root::
>>>         Waiting for host to become operational
>>>         2013-03-08 14:22:49::DEBUG::all_in_one_100::306::root::
>>>         current host status is: install_failed
>>>         2013-03-08 14:22:49::DEBUG::all_in_one_100::317::root::
>>>         Traceback (most recent call last):
>>>           File
>>>         "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py",
>>>         line 312, in isHostUp
>>>             raise utils.RetryFailException(ERROR_CREATE_HOST_FAILED)
>>>         RetryFailException: Error: Host was found in a 'Failed' state.
>>>         Please check engine and bootstrap installation logs.
>>>
>>>         2013-03-08 14:22:49::DEBUG::setup_sequences::62::root::
>>>         Traceback (most recent call last):
>>>           File "/usr/share/ovirt-engine/scripts/setup_sequences.py",
>>>         line 60, in run
>>>             function()
>>>           File
>>>         "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py",
>>>         line 300, in waitForHostUp
>>>             utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>>>           File "/usr/share/ovirt-engine/scripts/common_utils.py", line
>>>         1010, in retry
>>>             raise e
>>>         RetryFailException: Error: Host was found in a 'Failed' state.
>>>         Please check engine and bootstrap installation logs.
>>>
>>>         2013-03-08 14:22:49::DEBUG::engine-setup::1934::root:: *** The
>>>         following params were used as user input:
>>>
>>>
>>>         I have the full log if required ?? Any help would be 
>>> appreciated.
>>>
>>>         The options used were :
>>>
>>>         oVirt Engine will be installed using the following 
>>> configuration:
>>>         
>>> =================================================================
>>>         override-httpd-config:         yes
>>>         http-port:                     80
>>>         https-port:                    443
>>>         host-fqdn:                     stphv01
>>>         auth-pass:                     ********
>>>         org-name:                      LOCAL
>>>         application-mode:              both
>>>         default-dc-type:               NFS
>>>         db-remote-install:             local
>>>         db-local-pass:                 ********
>>>         nfs-mp:                        /exports/iso
>>>         override-firewall:             None
>>>         config-allinone:               yes
>>>         storage-path:                  /vmfs/ovirt
>>>         superuser-pass:                ********
>>>
>>>
>>>         Alex
>>>
>>>
>>>         --
>>>         | RHCE | Senior Systems Engineer | www.vcore.co
>>> <http://www.vcore.co> | www.vsearchcloud.com
>>> <http://www.vsearchcloud.com> |
>>>
>>>
>>>
>>>
>>>     --
>>>     | RHCE | Senior Systems Engineer | www.vcore.co
>>> <http://www.vcore.co> | www.vsearchcloud.com
>>> <http://www.vsearchcloud.com> |
>>>
>>>
>>>
>>>
>>> -- 
>>> | RHCE | Senior Systems Engineer | www.vcore.co <http://www.vcore.co>
>>> | www.vsearchcloud.com <http://www.vsearchcloud.com> |
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>> Hi Alex
>>
>> Could you please elaborate a bit on these dependencies? Do you have 
>> any logs that state the problem?
>>
>> Regarding the rest of the problem (that is adding the host), we're 
>> already looking into this.
>>
>> -- 
>>
>> Best regards,
>>
>> Alex Lourie
>> Software Developer in Integration
>> Red Hat
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130311/8e44ddc7/attachment-0001.html>


More information about the Users mailing list