[Users] ovirt 3.2 all-in-one setup always fails

Alex Lourie alourie at redhat.com
Tue Mar 12 17:39:47 UTC 2013


Hi Alex

On Sun, Mar 10, 2013 at 4:26 PM, Alex Leonhardt <alex.tuxx at gmail.com> 
wrote:
> Hi Alex,
> 
> Regarding the dependencies - libvirtd would not start w/o having 
> messagebus / avahi-daemon installed & running, however, it doesnt 
> seem to come up as an dependency when installing libvirtd (otherwise 
> it would have been installed previously) ? 
> 

wow, that's strange. I haven't seen this before. I suggest opening a 
bug on libvirt anyway.

> 
> I read this "solution" on some blog page, and based on that installed 
> avahi-daemon & messagebus + started them, only then libvirtd started 
> up. vdsmd wont tell you it's waiting for libvirtd to start on the 
> console, it'll mention in the log that "it's waiting for libvirtd" 
> and eventually will time out. 
> 

Granted, if these are the required dependencies, then definitely they 
should be installed.

I will look into this and try to understand what is it about.

> 
> Thanks,
> Alex
> 
> On 03/10/2013 10:19 AM, Alex Lourie wrote: On Fri 08 Mar 2013 
> 04:33:53 PM IST, Alex Leonhardt wrote: 
>>> 
>>> Also, the there seem to be missing some dependencies for 
>>> 
>>> - messagebus (service not enabled/started/installed) 
>>> - avahi-daemon (wasnt installed, had to install and start / enable) 
>>> 
>>> else 
>>> 
>>> libvirtd   will not start and the setup will fail. 
>>> 
>>> 
>>> 
>>> 
>>> On 8 March 2013 14:30, Alex Leonhardt <alex.tuxx at gmail.com 
>>> <mailto:alex.tuxx at gmail.com>> wrote: 
>>> 
>>>     And here from when I tried to use "localhost" as the host / 
>>> fqdn : 
>>> 
>>> 
>>>     Installing: 
>>>     AIO: Validating CPU Compatibility... 
>>>     [ DONE ] 
>>>     AIO: Adding firewall rules... 
>>>     [ DONE ] 
>>>     Configuring oVirt Engine... 
>>>     [ DONE ] 
>>>     Configuring JVM... 
>>>     [ DONE ] 
>>>     Creating CA... 
>>>     [ DONE ] 
>>>     Updating ovirt-engine service... 
>>>     [ DONE ] 
>>>     Setting Database Configuration... 
>>>     [ DONE ] 
>>>     Setting Database Security... 
>>>     [ DONE ] 
>>>     Creating Database... 
>>>     [ DONE ] 
>>>     Updating the Default Data Center Storage Type... 
>>>     [ DONE ] 
>>>     Editing oVirt Engine Configuration... 
>>>     [ DONE ] 
>>>     Editing Postgresql Configuration... 
>>>     [ DONE ] 
>>>     Configuring the Default ISO Domain... 
>>>     [ DONE ] 
>>>     Configuring Firewall... 
>>>     [ DONE ] 
>>>     Starting ovirt-engine Service... 
>>>     [ DONE ] 
>>>     Configuring HTTPD... 
>>>     [ DONE ] 
>>>     AIO: Creating storage directory... 
>>>     [ DONE ] 
>>>     AIO: Adding Local Datacenter and cluster... 
>>>     [ DONE ] 
>>>     AIO: Adding Local host (This may take several 
>>> minutes)...      [ 
>>>     ERROR ] 
>>>     Error: Host was found in a 'Failed' state. Please check 
>>> engine and 
>>>     bootstrap installation logs. 
>>>     Please check log file 
>>>     /var/log/ovirt-engine/engine-setup_2013_03_08_14_10_56.log 
>>> for 
>>>     more information 
>>>     Exception in thread libvirtEventLoop (most likely raised 
>>> during 
>>>     interpreter shutdown) 
>>> 
>>>     ######### 
>>> 
>>> 
>>>     2013-03-08 14:13:33::DEBUG::setup_sequences::59::root:: 
>>> running 
>>>     _loadFilesToIsoDomain 
>>>     2013-03-08 14:13:33::ERROR::engine-setup::1838::root:: 
>>> Traceback
>>>     (most recent call last): 
>>>       File "/usr/bin/engine-setup", line 1835, in 
>>> _loadFilesToIsoDomain 
>>>         utils.copyFile(filename, targetPath, 
>>> basedefs.CONST_VDSM_UID, 
>>>     basedefs.CONST_KVM_GID) 
>>>       File "/usr/share/ovirt-engine/scripts/common_utils.py", 
>>> line 
>>>     706, in copyFile 
>>>         shutil.copy2(fileSrc, destination) 
>>>       File "/usr/lib64/python2.6/shutil.py", line 95, in copy2 
>>>         copyfile(src, dst) 
>>>       File "/usr/lib64/python2.6/shutil.py", line 50, in 
>>> copyfile 
>>>         with open(src, 'rb') as fsrc: 
>>>     IOError: [Errno 2] No such file or directory: 
>>>     '/usr/share/virtio-win/virtio-win.vfd' 
>>> 
>>>     2013-03-08 14:13:33::ERROR::engine-setup::1839::root:: 
>>> Failed to 
>>>     copy files to iso domain 
>>> 
>>> 
>>>     [snip] 
>>> 
>>>     2013-03-08 14:14:14::DEBUG::setup_sequences::59::root:: 
>>> running 
>>>     waitForHostUp 
>>>     2013-03-08 14:14:14::DEBUG::all_in_one_100::303::root:: 
>>> Waiting 
>>>     for host to become operational 
>>>     2013-03-08 14:14:14::DEBUG::all_in_one_100::306::root:: 
>>> current 
>>>     host status is: installing 
>>>     2013-03-08 14:14:14::DEBUG::all_in_one_100::317::root:: 
>>> Traceback 
>>>     (most recent call last): 
>>> 
>>>       File 
>>>     "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>> line 
>>>     314, in isHostUp 
>>>         raise Exception(INFO_CREATE_HOST_WAITING_UP) 
>>>     Exception: Waiting for the host to start 
>>> 
>>>     2013-03-08 14:14:19::DEBUG::all_in_one_100::303::root:: 
>>> Waiting 
>>>     for host to become operational 
>>>     2013-03-08 14:14:19::DEBUG::all_in_one_100::306::root:: 
>>> current 
>>>     host status is: install_failed 
>>>     2013-03-08 14:14:19::DEBUG::all_in_one_100::317::root:: 
>>> Traceback 
>>>     (most recent call last): 
>>> 
>>>       File 
>>>     "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>> line 
>>>     312, in isHostUp 
>>>         raise 
>>> utils.RetryFailException(ERROR_CREATE_HOST_FAILED) 
>>>     RetryFailException: Error: Host was found in a 'Failed' 
>>> state. 
>>>     Please check engine and bootstrap installation logs. 
>>> 
>>>     2013-03-08 14:14:19::DEBUG::setup_sequences::62::root:: 
>>> Traceback 
>>>     (most recent call last): 
>>> 
>>>       File 
>>> "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 
>>>     60, in run 
>>>         function() 
>>>       File 
>>>     "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>> line 
>>>     300, in waitForHostUp 
>>>         utils.retry(isHostUp, tries=120, timeout=600, 
>>> sleep=5) 
>>>       File "/usr/share/ovirt-engine/scripts/common_utils.py", 
>>> line 
>>>     1010, in retry 
>>>         raise e 
>>>     RetryFailException: Error: Host was found in a 'Failed' 
>>> state. 
>>>     Please check engine and bootstrap installation logs. 
>>> 
>>> 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1934::root:: *** 
>>> The 
>>>     following params were used as user input: 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     override-httpd-config: yes 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> http-port: 80 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> https-port: 443 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     random-passwords: no 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> mac-range: 
>>>     00:1A:4A:A8:14:00-00:1A:4A:A8:14:FF 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> host-fqdn:
>>>     localhost 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> auth-pass:
>>>     ******** 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> org-name:
>>>     BrightTALK 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     application-mode: both 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     default-dc-type: NFS 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     db-remote-install: local 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> db-host: 
>>>     localhost 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     db-local-pass: ******** 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> nfs-mp: 
>>>     /exports/iso 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     iso-domain-name: ISO_DOMAIN 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>> config-nfs: yes 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     override-firewall: None 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     config-allinone: yes 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     storage-path: /vmfs 
>>>     2013-03-08 14:14:19::DEBUG::engine-setup::1939::root:: 
>>>     superuser-pass: ******** 
>>>     2013-03-08 14:14:19::ERROR::engine-setup::2355::root:: 
>>> Traceback
>>>     (most recent call last): 
>>>       File "/usr/bin/engine-setup", line 2349, in <module> 
>>>         main(confFile) 
>>>       File "/usr/bin/engine-setup", line 2132, in main 
>>>         runSequences() 
>>>       File "/usr/bin/engine-setup", line 2054, in runSequences 
>>>         controller.runAllSequences() 
>>>       File 
>>> "/usr/share/ovirt-engine/scripts/setup_controller.py", line 
>>>     54, in runAllSequences 
>>>         sequence.run() 
>>>       File 
>>> "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 
>>>     154, in run 
>>>         step.run() 
>>> 
>>>       File 
>>> "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 
>>>     60, in run 
>>>         function() 
>>>       File 
>>>     "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>> line 
>>>     300, in waitForHostUp 
>>>         utils.retry(isHostUp, tries=120, timeout=600, 
>>> sleep=5) 
>>>       File "/usr/share/ovirt-engine/scripts/common_utils.py", 
>>> line 
>>>     1010, in retry 
>>>         raise e 
>>>     RetryFailException: Error: Host was found in a 'Failed' 
>>> state. 
>>>     Please check engine and bootstrap installation logs. 
>>> 
>>> 
>>> 
>>>     On 8 March 2013 14:27, Alex Leonhardt <alex.tuxx at gmail.com 
>>>     <mailto:alex.tuxx at gmail.com>> wrote: 
>>> 
>>>         Hi, 
>>> 
>>>         The setup keeps failing at "waitforhostup" with : 
>>> 
>>> 
>>>         Installing: 
>>>         AIO: Validating CPU 
>>>         
>>> Compatibility...                              
>>> [ DONE ] 
>>>         AIO: Adding firewall 
>>>         
>>> rules...                                     
>>> [ DONE ] 
>>>         Configuring oVirt 
>>>         
>>> Engine...                                       
>>> [ DONE ] 
>>>         Configuring 
>>>         
>>> JVM...                                                
>>> [ DONE ] 
>>>         Creating 
>>>         
>>> CA...                                                    
>>> [ DONE ] 
>>>         Updating ovirt-engine 
>>>         
>>> service...                                  
>>> [ DONE ] 
>>>         Setting Database 
>>>         
>>> Configuration...                                 
>>> [ DONE ] 
>>>         Setting Database 
>>>         
>>> Security...                                      
>>> [ DONE ] 
>>>         Creating 
>>>         
>>> Database...                                              
>>> [ DONE ] 
>>>         Updating the Default Data Center Storage 
>>>         Type...                  [ DONE ] 
>>>         Editing oVirt Engine 
>>>         
>>> Configuration...                             
>>> [ DONE ] 
>>>         Editing Postgresql 
>>>         
>>> Configuration...                               
>>> [ DONE ] 
>>>         Configuring the Default ISO 
>>>         
>>> Domain...                             [ 
>>> DONE ] 
>>>         Configuring 
>>>         
>>> Firewall...                                           
>>> [ DONE ] 
>>>         Starting ovirt-engine 
>>>         
>>> Service...                                  
>>> [ DONE ] 
>>>         Configuring 
>>>         
>>> HTTPD...                                              
>>> [ DONE ] 
>>>         AIO: Creating storage 
>>>         
>>> directory...                                
>>> [ DONE ] 
>>>         AIO: Adding Local Datacenter and 
>>>         
>>> cluster...                       [ DONE ] 
>>>         AIO: Adding Local host (This may take several 
>>> minutes)... 
>>>         [ ERROR ] 
>>>         Error: Host was found in a 'Failed' state. Please 
>>> check engine 
>>>         and bootstrap installation logs. 
>>>         Please check log file 
>>>         
>>> /var/log/ovirt-engine/engine-setup_2013_03_08_14_17_42.log for 
>>>         more information 
>>> 
>>>         ##### 
>>> 
>>>         2013-03-08 
>>> 14:22:43::DEBUG::setup_sequences::59::root:: 
>>>         running waitForHostUp 
>>>         2013-03-08 
>>> 14:22:43::DEBUG::all_in_one_100::303::root:: 
>>>         Waiting for host to become operational 
>>>         2013-03-08 
>>> 14:22:43::DEBUG::all_in_one_100::306::root:: 
>>>         current host status is: installing 
>>>         2013-03-08 
>>> 14:22:43::DEBUG::all_in_one_100::317::root:: 
>>>         Traceback (most recent call last): 
>>>           File 
>>>         
>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>>         line 314, in isHostUp 
>>>             raise Exception(INFO_CREATE_HOST_WAITING_UP) 
>>>         Exception: Waiting for the host to start 
>>> 
>>>         2013-03-08 
>>> 14:22:48::DEBUG::all_in_one_100::303::root:: 
>>>         Waiting for host to become operational 
>>>         2013-03-08 
>>> 14:22:49::DEBUG::all_in_one_100::306::root:: 
>>>         current host status is: install_failed 
>>>         2013-03-08 
>>> 14:22:49::DEBUG::all_in_one_100::317::root:: 
>>>         Traceback (most recent call last): 
>>>           File 
>>>         
>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>>         line 312, in isHostUp 
>>>             raise 
>>> utils.RetryFailException(ERROR_CREATE_HOST_FAILED) 
>>>         RetryFailException: Error: Host was found in a 
>>> 'Failed' state. 
>>>         Please check engine and bootstrap installation logs. 
>>> 
>>>         2013-03-08 
>>> 14:22:49::DEBUG::setup_sequences::62::root:: 
>>>         Traceback (most recent call last): 
>>>           File 
>>> "/usr/share/ovirt-engine/scripts/setup_sequences.py", 
>>>         line 60, in run 
>>>             function() 
>>>           File 
>>>         
>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>>         line 300, in waitForHostUp 
>>>             utils.retry(isHostUp, tries=120, 
>>> timeout=600, sleep=5) 
>>>           File 
>>> "/usr/share/ovirt-engine/scripts/common_utils.py", line 
>>>         1010, in retry 
>>>             raise e 
>>>         RetryFailException: Error: Host was found in a 
>>> 'Failed' state. 
>>>         Please check engine and bootstrap installation logs. 
>>> 
>>>         2013-03-08 
>>> 14:22:49::DEBUG::engine-setup::1934::root:: *** The 
>>>         following params were used as user input: 
>>> 
>>> 
>>>         I have the full log if required ?? Any help would be 
>>> appreciated. 
>>> 
>>>         The options used were : 
>>> 
>>>         oVirt Engine will be installed using the following 
>>> configuration: 
>>>         
>>> =================================================================
>>>         override-httpd-config:         yes 
>>>         http-port:                     
>>> 80 
>>>         https-port:                    
>>> 443 
>>>         host-fqdn:                     
>>> stphv01 
>>>         auth-pass:                     
>>> ******** 
>>>         org-name:                      
>>> LOCAL 
>>>         application-mode:              both 
>>>         default-dc-type:               NFS 
>>>         db-remote-install:             local 
>>>         db-local-pass:                 
>>> ******** 
>>>         
>>> nfs-mp:                        /exports/iso 
>>>         override-firewall:             None 
>>>         config-allinone:               yes 
>>>         storage-path:                  
>>> /vmfs/ovirt 
>>>         superuser-pass:                
>>> ******** 
>>> 
>>> 
>>>         Alex 
>>> 
>>> 
>>>         -- 
>>>         | RHCE | Senior Systems Engineer | www.vcore.co 
>>>         <http://www.vcore.co> | www.vsearchcloud.com 
>>>         <http://www.vsearchcloud.com> | 
>>> 
>>> 
>>> 
>>> 
>>>     -- 
>>>     | RHCE | Senior Systems Engineer | www.vcore.co 
>>>     <http://www.vcore.co> | www.vsearchcloud.com 
>>>     <http://www.vsearchcloud.com> | 
>>> 
>>> 
>>> 
>>> 
>>> -- 
>>> | RHCE | Senior Systems Engineer | www.vcore.co 
>>> <http://www.vcore.co> 
>>> | www.vsearchcloud.com <http://www.vsearchcloud.com> | 
>>> 
>>> 
>>> _______________________________________________ 
>>> Users mailing list 
>>> Users at ovirt.org 
>>> http://lists.ovirt.org/mailman/listinfo/users 
>>> 
>>  
>> Hi Alex 
>> 
>> Could you please elaborate a bit on these dependencies? Do you have 
>> any logs that state the problem? 
>> 
>> Regarding the rest of the problem (that is adding the host), we're 
>> already looking into this. 
>> 
>> -- 
>> 
>> Best regards, 
>> 
>> Alex Lourie 
>> Software Developer in Integration 
>> Red Hat 
>> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130312/68ab9e77/attachment-0001.html>


More information about the Users mailing list