[Users] Host installation problems. Brigde

Wed Mar 13 08:57:04 UTC 2013

I have solved it :)

The problem was due to eth0 static IP not beeing set and misconfigured
/etc/hosts

I have it up and running and all is good :D

Kind regards
Christer

On Tue, Mar 12, 2013 at 6:19 PM, Christer Olsen
<christer.r.olsen at gmail.com>wrote:

> Ok. one last go at it.
>
> But I do not have the possibility to access it at the moment after testing
> the changes, as it kicked me out (even remote locally only gets host
> unreachable) so it will have to wait until I can go to the location at
> hand.
>
> I will send you the specified cfg's and logs as soon as possible.
>
> Thanks.
>
>
>
>
> On Tue, Mar 12, 2013 at 6:07 PM, Alon Bar-Lev <alonbl at redhat.com> wrote:
>
>> Please attach:
>> 1. /etc/sysconfig/network-scripts/ifcfg-*
>> 2. /tmp/vdsm-bootstrap-*.log
>> 3. On engine: rpm -q ovirt-engine
>> 4. On engine: rpm -q vdsm-bootstrap
>>
>> Thanks.
>>
>> ----- Original Message -----
>> > From: "Christer Olsen" <christer.r.olsen at gmail.com>
>> > To: "Alex Leonhardt" <alex.tuxx at gmail.com>
>> > Cc: "oVirt Mailing List" <users at ovirt.org>
>> > Sent: Tuesday, March 12, 2013 7:05:35 PM
>> > Subject: Re: [Users] Host installation problems. Brigde
>> >
>> >
>> >
>> >
>> > I've tried dhcp, static and so forth.
>> >
>> > I've tried with two nics (eth0 and eth1)
>> >
>> >
>> > I'm now done trying to find a solution. This is not worth the time
>> > I'm afraid. (been trying for 8 days)
>> >
>> >
>> > Please see this topic as ended. I will find other solutions.
>> >
>> >
>> > Thank you for your time.
>> >
>> >
>> >
>> >
>> > Kind regards
>> > Christer
>> >
>> >
>> >
>> >
>> > On Tue, Mar 12, 2013 at 4:30 PM, Alex Leonhardt < alex.tuxx at gmail.com
>> > > wrote:
>> >
>> >
>> >
>> >
>> > did you try to just setting the ovirtmgmt interface to DHCP ?
>> >
>> >
>> > alex
>> >
>> >
>> >
>> >
>> >
>> >
>> > On 12 March 2013 15:28, Alex Leonhardt < alex.tuxx at gmail.com > wrote:
>> >
>> >
>> >
>> >
>> > in the log:
>> >
>> >
>> > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1037 makeBridge Failed to
>> > add ovirtmgmt bridge out=Specified netmask or gateway but not ip
>> >
>> >
>> > check you have
>> >
>> > DEVICE=
>> > IPADDR=
>> > NETMAKS=
>> > TYPE=
>> >
>> > as a minimum in ifcfg-ovirtmgmt
>> >
>> >
>> >
>> > and that ifcfg-eth0 has
>> >
>> >
>> > BRIDGE=ovirtmgmt
>> >
>> >
>> >
>> >
>> > Alex
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > On 12 March 2013 15:25, Antoni Segura Puimedon < asegurap at redhat.com
>> > > wrote:
>> >
>> >
>> > Could you attach the /etc/sysconfig/network-scripts/ifcfg-*
>> > files?
>> >
>> >
>> >
>> > ----- Original Message -----
>> > > From: "Christer Olsen" < christer.r.olsen at gmail.com >
>> > > To: users at ovirt.org
>> > > Sent: Tuesday, March 12, 2013 4:14:05 PM
>> > > Subject: Re: [Users] Host installation problems. Brigde
>> > >
>> > >
>> > >
>> > > It seems i sent the log file to only one person.
>> > > Here is the complete log file.
>> > > http://pastebin.com/5VYg4DFs
>> > >
>> > >
>> > >
>> > > On Tue, Mar 12, 2013 at 4:13 PM, Christer Olsen <
>> > > christer.r.olsen at gmail.com > wrote:
>> > >
>> > >
>> > >
>> > >
>> > > Does anyone have a clue what i might need to do ?
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > On Tue, Mar 12, 2013 at 4:12 PM, Christer Olsen <
>> > > christer.r.olsen at gmail.com > wrote:
>> > >
>> > >
>> > >
>> > > Does anyone have a clue what i might need to do ?
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > On Mon, Mar 11, 2013 at 4:55 PM, Christer Olsen <
>> > > christer.r.olsen at gmail.com > wrote:
>> > >
>> > >
>> > >
>> > > Here is the complete log file.
>> > >
>> > > http://pastebin.com/5VYg4DFs
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > On Mon, Mar 11, 2013 at 10:31 AM, Antoni Segura Puimedon <
>> > > asegurap at redhat.com > wrote:
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > ----- Original Message -----
>> > > > From: "Dan Kenigsberg" < danken at redhat.com >
>> > > > To: "Christer Olsen" < christer.r.olsen at gmail.com >
>> > > > Cc: users at ovirt.org
>> > > > Sent: Monday, March 11, 2013 10:18:13 AM
>> > > > Subject: Re: [Users] Host installation problems. Brigde
>> > > >
>> > > > On Sun, Mar 10, 2013 at 07:30:15PM +0100, Christer Olsen wrote:
>> > > > > I'm having issues with installing host in oVirt.
>> > > > >
>> > > > >
>> > > > > Manager reports:
>> > > > > Failed to install Host localhost. Step: SetNetworking; Details:
>> > > > > addNetwork
>> > > > > error trying to add management bridge.
>> > > >
>> > > > Which version of ovirt are you using? ovirt-3.2 should be using
>> > > > ovirt-host-deploy, which has differently-looking logs, and
>> > > > hopefully
>> > > > less bugs.
>> > >
>> > > According to the repo he listed, ovirt-3.1, as seen in:
>> > >
>> > > http://dev.centos.org/centos/6/ovirt/x86_64/RPMS/
>> > >
>> > >
>> > >
>> > > >
>> > > > >
>> > > > >
>> > > > > *** LOG ***
>> > > > >
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 517 getAddress
>> > > > > Entry.
>> > > > > url=
>> > > > > http://10.1.1.30:22020/Components/vds/
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 539 getAddress
>> > > > > return.
>> > > > > address=10.1.1.30 port=22020
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 957 makeBridge
>> > > > > begin.
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 424 _getMGTIface:
>> > > > > read host
>> > > > > name: 10.1.1.30
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 431 _getMGTIface:
>> > > > > using host
>> > > > > name 10.1.1.30 strIP= 10.1.1.30
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 437 _getMGTIface
>> > > > > IP=10.1.1.30
>> > > > > strIface=eth0
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 997 makeBridge found
>> > > > > the
>> > > > > following bridge paramaters: ['NAME=', 'BOOTPROTO=dhcp', $
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 135
>> > > > > ['/usr/share/vdsm/addNetwork', 'ovirtmgmt', '', '', 'eth0',
>> > > > > 'NAME=',
>> > > > > 'BOOTPROT$
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 143 Specified
>> > > > > netmask
>> > > > > or
>> > > > > gateway but not ip
>> > > > >
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 144
>> > > > > WARNING:root:options
>> > > > > IPADDR is deprecated. Use ipaddr instead
>> > > > > WARNING:root:options NETMASK is deprecated. Use netmask instead
>> > > > > WARNING:root:options BOOTPROTO is deprecated. Use bootproto
>> > > > > instead
>> > > > > WARNING:root:options ONBOOT is deprecated. Use onboot instead
>> > > > > Traceback (most recent call last):
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 1458, in <module>
>> > > > > main()
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 1427, in main
>> > > > > addNetwork(bridge, **kwargs)
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 890, in
>> > > > > addNetwork
>> > > > > bridged=bridged, **options)
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 823, in
>> > > > > _addNetworkValidation
>> > > > > "Specified netmask or gateway but not ip")
>> > > > > ConfigNetworkError: (22, 'Specified netmask or gateway but not
>> > > > > ip')
>> > > > >
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1037 makeBridge
>> > > > > Failed to add
>> > > > > ovirtmgmt bridge out=Specified netmask or gateway bu$
>> > > > >
>> > > > > err=WARNING:root:options IPADDR is deprecated. Use ipaddr
>> > > > > instead
>> > > > > WARNING:root:options NETMASK is deprecated. Use netmask instead
>> > > > > WARNING:root:options BOOTPROTO is deprecated. Use bootproto
>> > > > > instead
>> > > > > WARNING:root:options ONBOOT is deprecated. Use onboot instead
>> > > > > Traceback (most recent call last):
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 1458, in <module>
>> > > > > main()
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 1427, in main
>> > > > > addNetwork(bridge, **kwargs)
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 890, in
>> > > > > addNetwork
>> > > > > bridged=bridged, **options)
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 823, in
>> > > > > _addNetworkValidation
>> > > > > "Specified netmask or gateway but not ip")
>> > > > > ConfigNetworkError: (22, 'Specified netmask or gateway but not
>> > > > > ip')
>> > > > >
>> > > > > ret=22
>> > > > > Sun, 10 Mar 2013 19:19:30 ERROR deployUtil 1052 makeBridge
>> > > > > errored:
>> > > > > out=Specified netmask or gateway but not ip
>> > > > >
>> > > > > err=WARNING:root:options IPADDR is deprecated. Use ipaddr
>> > > > > instead
>> > > > > WARNING:root:options NETMASK is deprecated. Use netmask instead
>> > > > > WARNING:root:options BOOTPROTO is deprecated. Use bootproto
>> > > > > instead
>> > > > > WARNING:root:options ONBOOT is deprecated. Use onboot instead
>> > > > > Traceback (most recent call last):
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 1458, in <module>
>> > > > > main()
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 1427, in main
>> > > > > addNetwork(bridge, **kwargs)
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 890, in
>> > > > > addNetwork
>> > > > > bridged=bridged, **options)
>> > > > > File "/usr/share/vdsm/configNetwork.py", line 823, in
>> > > > > _addNetworkValidation
>> > > > > "Specified netmask or gateway but not ip")
>> > > > > ConfigNetworkError: (22, 'Specified netmask or gateway but not
>> > > > > ip')
>> > > > >
>> > > > > ret=22
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1055 makeBridge
>> > > > > return.
>> > > > > Sun, 10 Mar 2013 19:19:30 ERROR vds_bootstrap 729 addNetwork
>> > > > > error
>> > > > > trying to add management bridge
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 278 <BSTRAP
>> > > > > component='SetNetworking' status='FAIL' message='addNetwork
>> > > > > error
>> > > > > t$
>> > > > > Sun, 10 Mar 2013 19:19:30 ERROR vds_bootstrap 1023
>> > > > > setNetworking
>> > > > > test
>> > > > > failed
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 1140 <BSTRAP
>> > > > > component='RHEV_INSTALL' status='FAIL'/>
>> > > > > Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 1142 **** End VDS
>> > > > > Validation ****
>> > > > >
>> > > > >
>> > > > > *** END LOG ***
>> > > > >
>> > > > >
>> > > > >
>> > > > > I have tried googling myself to an answer, and i have tried
>> > > > > finding
>> > > > > it out
>> > > > > myself but with no luck.
>> > > > >
>> > > > >
>> > > > > (the host is the same one as the engine is running on)
>> > > > >
>> > > > > Please, any help would be appreciated.
>> > > > >
>> > > > >
>> > > > > Kind regards
>> > > >
>> > > > > _______________________________________________
>> > > > > Users mailing list
>> > > > > Users at ovirt.org
>> > > > > http://lists.ovirt.org/mailman/listinfo/users
>> > > >
>> > > > _______________________________________________
>> > > > Users mailing list
>> > > > Users at ovirt.org
>> > > > http://lists.ovirt.org/mailman/listinfo/users
>> > > >
>> > > _______________________________________________
>> > > Users mailing list
>> > > Users at ovirt.org
>> > > http://lists.ovirt.org/mailman/listinfo/users
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > _______________________________________________
>> > > Users mailing list
>> > > Users at ovirt.org
>> > > http://lists.ovirt.org/mailman/listinfo/users
>> > >
>> > _______________________________________________
>> > Users mailing list
>> > Users at ovirt.org
>> > http://lists.ovirt.org/mailman/listinfo/users
>> >
>> >
>> >
>> > --
>> >
>> >
>> > | RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co |
>> > | www.vsearchcloud.com |
>> >
>> >
>> >
>> > --
>> >
>> >
>> > | RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co |
>> > | www.vsearchcloud.com |
>> >
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users at ovirt.org
>> > http://lists.ovirt.org/mailman/listinfo/users
>> >
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130313/b8ef06d1/attachment-0001.html>