[Users] Problem install

Alex Lourie alourie at redhat.com
Tue Mar 19 14:39:55 UTC 2013


Hi Marcelo

Let's try something else.

Run

sed -i 's/\#WDMDOPTS/WDMDOPTS/g' /etc/sysconfig/wdmd

And try running the setup again.

On Tue, Mar 19, 2013 at 4:26 PM, Marcelo Barbosa 
<mr.marcelo.barbosa at gmail.com> wrote:
> Alex,
> 
>    Follows the file:
>    
> [root at firelap marcelo.barbosa]# cat /etc/sysconfig/wdmd
> # WDMDOPTS -- set the command line options for the wdmd daemon
> # See wdmd man page for full list of command line options.
> #
> # Include "-G sanlock" in the option string.
> #
> # To enable use of test scripts
> #WDMDOPTS="-G sanlock -S 1"
> #
> # To select a specific watchdog device
> #WDMDOPTS="-G sanlock -w /dev/watchdog1"
> 
>    I tried again, but error:
> 
> 2013-03-19 11:05:33::ERROR::engine-setup::2385::root:: Traceback 
> (most recent call last):
>   File "/bin/engine-setup", line 2379, in <module>
>     main(confFile)
>   File "/bin/engine-setup", line 2162, in main
>     runSequences()
>   File "/bin/engine-setup", line 2085, in runSequences
>     controller.runAllSequences()
>   File "/usr/share/ovirt-engine/scripts/setup_controller.py", line 
> 54, in runAllSequences
>     sequence.run()
>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 
> 154, in run
>     step.run()
>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 
> 60, in run
>     function()
>   File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
> line 300, in waitForHostUp
>     utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>   File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, 
> in retry
>     raise e
> RetryFailException: Error: Host was found in a 'Failed' state. Please 
> check engine and bootstrap installation logs.
> 
>    Full ERROR/LOG in attached.
> 
>    More informations about my enviroment:
> 
> [root at firelap marcelo.barbosa]# rpm -qa | grep -i ovirt-engine
> ovirt-engine-setup-plugin-allinone-3.2.1-1.fc18.noarch
> ovirt-engine-backend-3.2.1-1.fc18.noarch
> ovirt-engine-restapi-3.2.1-1.fc18.noarch
> ovirt-engine-genericapi-3.2.1-1.fc18.noarch
> ovirt-engine-cli-3.2.0.11-1.fc18.noarch
> ovirt-engine-3.2.1-1.fc18.noarch
> ovirt-engine-setup-3.2.1-1.fc18.noarch
> ovirt-engine-dbscripts-3.2.1-1.fc18.noarch
> ovirt-engine-sdk-3.2.0.10-1.fc18.noarch
> ovirt-engine-userportal-3.2.1-1.fc18.noarch
> ovirt-engine-webadmin-portal-3.2.1-1.fc18.noarch
> ovirt-engine-tools-3.2.1-1.fc18.noarch
> 
> [root at firelap marcelo.barbosa]# cat /etc/hosts
> 127.0.0.1   localhost localhost.localdomain localhost4 
> localhost4.localdomain4
> ::1         localhost localhost.localdomain localhost6 
> localhost6.localdomain6
> 172.16.255.54	firelap	firelap.local
> 
> [root at firelap marcelo.barbosa]# ifconfig 
> bond0: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0 
>  collisions 0
> 
> bond1: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0 
>  collisions 0
> 
> bond2: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0 
>  collisions 0
> 
> bond3: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0 
>  collisions 0
> 
> bond4: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>         RX packets 0  bytes 0 (0.0 B)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 0  bytes 0 (0.0 B)
>         TX errors 0  dropped 0 overruns 0  carrier 0 
>  collisions 0
> 
> lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
>         inet 127.0.0.1  netmask 255.0.0.0
>         inet6 ::1  prefixlen 128  scopeid 0x10<host>
>         loop  txqueuelen 0  (Local Loopback)
>         RX packets 115968  bytes 34730071 (33.1 MiB)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 115968  bytes 34730071 (33.1 MiB)
>         TX errors 0  dropped 0 overruns 0  carrier 0 
>  collisions 0
> 
> p5p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>         inet 172.16.255.54  netmask 255.255.255.192  broadcast 
> 172.16.255.63
>         inet6 fe80::7a45:c4ff:feb0:8995  prefixlen 64  scopeid 
> 0x20<link>
>         ether 78:45:c4:b0:89:95  txqueuelen 1000  (Ethernet)
>         RX packets 1785531  bytes 2623497125 (2.4 GiB)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 975613  bytes 76733377 (73.1 MiB)
>         TX errors 0  dropped 0 overruns 0  carrier 0 
>  collisions 0
>         device interrupt 17  
> 
>    Forever run engine-cleanup before engine-setup
> 
> [root at localhost ~]# engine-setup 
> Welcome to oVirt Engine setup utility
> oVirt Engine uses httpd to proxy requests to the application server.
> It looks like the httpd installed locally is being actively used.
> The installer can override current configuration .
> Alternatively you can use JBoss directly (on ports higher than 1024)
> Do you wish to override current httpd configuration and restart the 
> service? ['yes'| 'no']  [yes] : 
> HTTP Port  [80] : 
> HTTPS Port  [443] : 
> Host fully qualified domain name. Note: this name should be fully 
> resolvable  [firelap.local] : 
> firelap.local did not resolve into an IP address
> User input failed validation, do you still wish to use it? (yes|no): 
> yes
> Enter a password for an internal oVirt Engine administrator user 
> (admin at internal) :
> Warning: Weak Password.
> Confirm password :
> Organization Name for the Certificate  [local] : 
> The engine can be configured to present the UI in three different 
> application modes. virt [Manage virtualization only], gluster [Manage 
> gluster storage only], and both [Manage virtualization as well as 
> gluster storage] ['virt'| 'gluster'| 'both']  [both] : 
> The default storage type you will be using  ['NFS'| 'FC'| 'ISCSI'| 
> 'POSIXFS']  [NFS] : 
> Enter DB type for installation ['remote'| 'local']  [local] : 
> Enter a password for a local oVirt Engine DB admin user (engine) :
> Warning: Weak Password.
> Confirm password :
> Error: passwords don't match
> Enter a password for a local oVirt Engine DB admin user (engine) :
> Warning: Weak Password.
> Confirm password :
> Local ISO domain path  [/var/lib/exports/iso] : /firebackup/ovirt/iso
> Error: mount point already exists in /etc/exports
> Local ISO domain path  [/var/lib/exports/iso] : /firebackup/ovirt/iso
> Firewall ports need to be opened.
> The installer can configure firewall automatically overriding the 
> current configuration. The old configuration will be backed up.
> Alternately you can configure the firewall later using an example 
> file. 
> Which firewall do you wish to configure? ['None'| 'Firewalld'| 
> 'IPTables']: IPTables
> Configure VDSM on this host? ['yes'| 'no']  [yes] : 
> Local storage domain path  [/var/lib/images] : /firebackup/ovirt/vms
> Confirm root password :
> 
> oVirt Engine will be installed using the following configuration:
> =================================================================
> override-httpd-config:         yes
> http-port:                     80
> https-port:                    443
> host-fqdn:                     firelap.local
> auth-pass:                     ********
> org-name:                      local
> application-mode:              both
> default-dc-type:               NFS
> db-remote-install:             local
> db-local-pass:                 ********
> nfs-mp:                        /firebackup/ovirt/iso
> override-firewall:             IPTables
> config-allinone:               yes
> storage-path:                  /firebackup/ovirt/vms
> superuser-pass:                ********
> Proceed with the configuration listed above? (yes|no): yes
> 
> Installing:
> AIO: Validating CPU Compatibility...                       
>        [ DONE ]
> AIO: Adding firewall rules...                           
>           [ DONE ]
> Configuring oVirt Engine...                             
>           [ DONE ]
> Configuring JVM...                                   
>              [ DONE ]
> Creating CA...                                     
>                [ DONE ]
> Updating ovirt-engine service...                         
>          [ DONE ]
> Setting Database Configuration...                         
>         [ DONE ]
> Setting Database Security...                           
>            [ DONE ]
> Creating Database...                                 
>              [ DONE ]
> Updating the Default Data Center Storage Type...               
>    [ DONE ]
> Editing oVirt Engine Configuration...                     
>         [ DONE ]
> Editing Postgresql Configuration...                       
>         [ DONE ]
> Configuring the Default ISO Domain...                     
>         [ DONE ]
> Configuring Firewall...                               
>             [ DONE ]
> Starting ovirt-engine Service...                         
>          [ DONE ]
> Configuring HTTPD...                                 
>              [ DONE ]
> AIO: Creating storage directory...                       
>          [ DONE ]
> AIO: Adding Local Datacenter and cluster...                 
>       [ DONE ]
> AIO: Adding Local host (This may take several minutes)...      [ 
> ERROR ]
> Error: Host was found in a 'Failed' state. Please check engine and 
> bootstrap installation logs.
> Please check log file 
> /var/log/ovirt-engine/engine-setup_2013_03_19_11_00_51.log for more 
> information
> 
>    Let me know if you need any additional tests, thank you for 
> attention. 
> 
> Marcelo Barbosa
> mr.marcelo.barbosa at gmail.com
> 
> 
> On Tue, Mar 19, 2013 at 10:51 AM, Marcelo Barbosa 
> <mr.marcelo.barbosa at gmail.com> wrote:
>> Alex,
>> 
>>    i am check:
>> 
>> # rpm -qa | grep sanlock
>> sanlock-2.6-7.fc18.x86_64
>> libvirt-lock-sanlock-0.10.2.3-1.fc18.x86_64
>> sanlock-lib-2.6-7.fc18.x86_64
>> sanlock-python-2.6-7.fc18.x86_64
>> 
>>    you would like make reinstall ? I can try again...
>> 
>> Marcelo Barbosa
>> mr.marcelo.barbosa at gmail.com
>> 
>> 
>> On Tue, Mar 19, 2013 at 10:30 AM, Alex Lourie <alourie at redhat.com> 
>> wrote:
>>> Hi Marcelo
>>> 
>>> Can you please check that you have sanlock-2.6-7 installed?
>>> 
>>> Thanks.
>>> 
>>> On Wed, Mar 6, 2013 at 10:51 PM, Marcelo Barbosa 
>>> <mr.marcelo.barbosa at gmail.com> wrote:
>>>> Alex,
>>>> 
>>>>    Thankyou for attention. This return should not happen, 
>>>> because I have my hostname registered and running on my DNS 
>>>> servers, but i'm inserted in /etc/hosts my hostname and retry 
>>>> setup, but return new error:
>>>> 
>>>> 
>>>> 2013-03-06 17:35:14::DEBUG::all_in_one_100::297::root:: Waiting 
>>>> for host to become operational
>>>> 2013-03-06 17:35:14::DEBUG::all_in_one_100::300::root:: current 
>>>> host status is: up
>>>> 2013-03-06 17:35:14::DEBUG::all_in_one_100::302::root:: The host 
>>>> is up.
>>>> 2013-03-06 17:35:14::DEBUG::setup_sequences::59::root:: running 
>>>> addStorageDomain
>>>> 2013-03-06 17:35:14::DEBUG::all_in_one_100::317::root:: Adding 
>>>> local storage domain
>>>> 2013-03-06 17:35:14::INFO::all_in_one_100::322::root:: Creating 
>>>> local storage
>>>> 2013-03-06 17:35:14::INFO::all_in_one_100::326::root:: Creating 
>>>> local storage domain
>>>> 2013-03-06 17:35:14::INFO::all_in_one_100::334::root:: Adding 
>>>> local storage domain
>>>> 2013-03-06 17:35:15::ERROR::all_in_one_100::337::root:: Traceback 
>>>> (most recent call last):
>>>>   File 
>>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 
>>>> 335, in addStorageDomain
>>>>     controller.CONF["API_OBJECT"].storagedomains.add(sdParams)
>>>>   File 
>>>> "/usr/lib/python2.7/site-packages/ovirtsdk/infrastructure/brokers.py", 
>>>> line 5151, in add
>>>>     headers={"Expect":expect, "Correlation-Id":correlation_id})
>>>>   File 
>>>> "/usr/lib/python2.7/site-packages/ovirtsdk/infrastructure/proxy.py", 
>>>> line 118, in add
>>>>     return self.request('POST', url, body, headers)
>>>>   File 
>>>> "/usr/lib/python2.7/site-packages/ovirtsdk/infrastructure/proxy.py", 
>>>> line 129, in request
>>>>     last=last)
>>>>   File 
>>>> "/usr/lib/python2.7/site-packages/ovirtsdk/infrastructure/proxy.py", 
>>>> line 159, in __doRequest
>>>>     raise RequestError, response
>>>> RequestError: 
>>>> status: 400
>>>> reason: Bad Request
>>>> detail: Cannot add Storage. Internal error, Storage Connection 
>>>> doesn't exist.
>>>> 
>>>> 2013-03-06 17:35:15::DEBUG::setup_sequences::62::root:: Traceback 
>>>> (most recent call last):
>>>>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 
>>>> 60, in run
>>>>     function()
>>>>   File 
>>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 
>>>> 338, in addStorageDomain
>>>>     raise Exception(ERROR_ADD_LOCAL_DOMAIN)
>>>> Exception: Error: could not add local storage domain
>>>> 
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1948::root:: *** The 
>>>> following params were used as user input:
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> override-httpd-config: yes
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: http-port: 
>>>> 80
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: https-port: 
>>>> 443
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> random-passwords: no
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: mac-range: 
>>>> 00:1A:4A:10:FF:00-00:1A:4A:10:FF:FF
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: host-fqdn: 
>>>> firelap.usc.unirede.net
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: auth-pass: 
>>>> ********
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: org-name: 
>>>> firelap
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> application-mode: both
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> default-dc-type: NFS
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> db-remote-install: local
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: db-host: 
>>>> localhost
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> db-local-pass: ********
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: nfs-mp: 
>>>> /firebackup/********/iso
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> iso-domain-name: ISO_DOMAIN
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: config-nfs: 
>>>> yes
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> override-firewall: IPTables
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> config-allinone: yes
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> storage-path: /firebackup/********/vms
>>>> 2013-03-06 17:35:15::DEBUG::engine-setup::1953::root:: 
>>>> superuser-pass: ********
>>>> 2013-03-06 17:35:15::ERROR::engine-setup::2369::root:: Traceback 
>>>> (most recent call last):
>>>>   File "/bin/engine-setup", line 2363, in <module>
>>>>     main(confFile)
>>>>   File "/bin/engine-setup", line 2146, in main
>>>>     runSequences()
>>>>   File "/bin/engine-setup", line 2068, in runSequences
>>>>     controller.runAllSequences()
>>>>   File "/usr/share/ovirt-engine/scripts/setup_controller.py", 
>>>> line 54, in runAllSequences
>>>>     sequence.run()
>>>>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 
>>>> 154, in run
>>>>     step.run()
>>>>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 
>>>> 60, in run
>>>>     function()
>>>>   File 
>>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line 
>>>> 338, in addStorageDomain
>>>>     raise Exception(ERROR_ADD_LOCAL_DOMAIN)
>>>> Exception: Error: could not add local storage domain
>>>> 
>>>>    Any ideas to solve this problem?
>>>> 
>>>> Marcelo Barbosa
>>>> mr.marcelo.barbosa at gmail.com
>>>> 
>>>> 
>>>> On Wed, Mar 6, 2013 at 4:23 PM, Alexandre Santos 
>>>> <santosam72 at gmail.com> wrote:
>>>>> Hi. Have you tried solving the hostnames resolving issues that 
>>>>> are described on your email? Add the hosts to /etc/hosts
>>>>> 
>>>>> Alex
>>>>> 
>>>>> No dia 06/03/2013 18:02, "Marcelo Barbosa" 
>>>>> <mr.marcelo.barbosa at gmail.com> escreveu:
>>>>>> Attached my log file. 
>>>>>> 
>>>>>> Marcelo Barbosa
>>>>>> mr.marcelo.barbosa at gmail.com
>>>>>> 
>>>>>> 
>>>>>> On Wed, Mar 6, 2013 at 2:48 PM, Marcelo Barbosa 
>>>>>> <mr.marcelo.barbosa at gmail.com> wrote:
>>>>>>> hi guys,
>>>>>>> 
>>>>>>>    I'am tryed install Ovirt 3.2 all-in-one in my Fedora 18, 
>>>>>>> but this version not finish for sucessful install, information 
>>>>>>> my enviroment:
>>>>>>> 
>>>>>>> [root at firelap ovirt]# cat /etc/redhat-release 
>>>>>>> Fedora release 18 (Spherical Cow)
>>>>>>> 
>>>>>>> [root at firelap ovirt]# uname -a
>>>>>>> Linux firelap 3.7.9-205.fc18.x86_64 #1 SMP Sun Feb 24 20:10:02 
>>>>>>> UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
>>>>>>> 
>>>>>>> [root at firelap ovirt]# ifconfig 
>>>>>>> bond0: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>>>>>>>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>>>>>>>         RX packets 0  bytes 0 (0.0 B)
>>>>>>>         RX errors 0  dropped 0  overruns 0  frame 0
>>>>>>>         TX packets 0  bytes 0 (0.0 B)
>>>>>>>         TX errors 0  dropped 0 overruns 0  carrier 0 
>>>>>>>  collisions 0
>>>>>>> 
>>>>>>> bond1: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>>>>>>>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>>>>>>>         RX packets 0  bytes 0 (0.0 B)
>>>>>>>         RX errors 0  dropped 0  overruns 0  frame 0
>>>>>>>         TX packets 0  bytes 0 (0.0 B)
>>>>>>>         TX errors 0  dropped 0 overruns 0  carrier 0 
>>>>>>>  collisions 0
>>>>>>> 
>>>>>>> bond2: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>>>>>>>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>>>>>>>         RX packets 0  bytes 0 (0.0 B)
>>>>>>>         RX errors 0  dropped 0  overruns 0  frame 0
>>>>>>>         TX packets 0  bytes 0 (0.0 B)
>>>>>>>         TX errors 0  dropped 0 overruns 0  carrier 0 
>>>>>>>  collisions 0
>>>>>>> 
>>>>>>> bond3: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>>>>>>>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>>>>>>>         RX packets 0  bytes 0 (0.0 B)
>>>>>>>         RX errors 0  dropped 0  overruns 0  frame 0
>>>>>>>         TX packets 0  bytes 0 (0.0 B)
>>>>>>>         TX errors 0  dropped 0 overruns 0  carrier 0 
>>>>>>>  collisions 0
>>>>>>> 
>>>>>>> bond4: flags=5123<UP,BROADCAST,MASTER,MULTICAST>  mtu 1500
>>>>>>>         ether 00:00:00:00:00:00  txqueuelen 0  (Ethernet)
>>>>>>>         RX packets 0  bytes 0 (0.0 B)
>>>>>>>         RX errors 0  dropped 0  overruns 0  frame 0
>>>>>>>         TX packets 0  bytes 0 (0.0 B)
>>>>>>>         TX errors 0  dropped 0 overruns 0  carrier 0 
>>>>>>>  collisions 0
>>>>>>> 
>>>>>>> lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
>>>>>>>         inet 127.0.0.1  netmask 255.0.0.0
>>>>>>>         inet6 ::1  prefixlen 128  scopeid 0x10<host>
>>>>>>>         loop  txqueuelen 0  (Local Loopback)
>>>>>>>         RX packets 136972  bytes 54834621 (52.2 MiB)
>>>>>>>         RX errors 0  dropped 0  overruns 0  frame 0
>>>>>>>         TX packets 136972  bytes 54834621 (52.2 MiB)
>>>>>>>         TX errors 0  dropped 0 overruns 0  carrier 0 
>>>>>>>  collisions 0
>>>>>>> 
>>>>>>> p5p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>>>>>>>         inet 172.16.255.43  netmask 255.255.255.192 
>>>>>>>  broadcast 172.16.255.63
>>>>>>>         inet6 fe80::7a45:c4ff:feb0:8995  prefixlen 64 
>>>>>>>  scopeid 0x20<link>
>>>>>>>         ether 78:45:c4:b0:89:95  txqueuelen 1000 
>>>>>>>  (Ethernet)
>>>>>>>         RX packets 480681  bytes 614801393 (586.3 MiB)
>>>>>>>         RX errors 0  dropped 0  overruns 0  frame 0
>>>>>>>         TX packets 323373  bytes 35479386 (33.8 MiB)
>>>>>>>         TX errors 0  dropped 0 overruns 0  carrier 0 
>>>>>>>  collisions 0
>>>>>>>         device interrupt 17  
>>>>>>> 
>>>>>>> [root at firelap ovirt]# rpm -qa | grep ovirt
>>>>>>> ovirt-engine-cli-3.2.0.10-1.fc18.noarch
>>>>>>> ovirt-engine-backend-3.2.0-4.fc18.noarch
>>>>>>> ovirt-engine-config-3.2.0-4.fc18.noarch
>>>>>>> ovirt-host-deploy-1.0.0-1.fc18.noarch
>>>>>>> ovirt-engine-setup-plugin-allinone-3.2.0-4.fc18.noarch
>>>>>>> ovirt-engine-restapi-3.2.0-4.fc18.noarch
>>>>>>> ovirt-engine-dbscripts-3.2.0-4.fc18.noarch
>>>>>>> ovirt-image-uploader-3.2.0-1.fc18.noarch
>>>>>>> ovirt-host-deploy-offline-1.0.0-1.fc18.noarch
>>>>>>> ovirt-engine-setup-3.2.0-4.fc18.noarch
>>>>>>> ovirt-release-fedora-5-3.noarch
>>>>>>> ovirt-engine-tools-common-3.2.0-4.fc18.noarch
>>>>>>> ovirt-engine-3.2.0-4.fc18.noarch
>>>>>>> ovirt-log-collector-3.2.0-1.fc18.noarch
>>>>>>> ovirt-host-deploy-java-1.0.0-1.fc18.noarch
>>>>>>> ovirt-engine-userportal-3.2.0-4.fc18.noarch
>>>>>>> ovirt-engine-notification-service-3.2.0-4.fc18.noarch
>>>>>>> ovirt-iso-uploader-3.2.0-1.fc18.noarch
>>>>>>> ovirt-engine-webadmin-portal-3.2.0-4.fc18.noarch
>>>>>>> ovirt-engine-sdk-3.2.0.9-1.fc18.noarch
>>>>>>> ovirt-engine-genericapi-3.2.0-4.fc18.noarch
>>>>>>> 
>>>>>>> [root at firelap ~]# host firelap.usc.unirede.net
>>>>>>> firelap.usc.unirede.net has address 172.16.255.43
>>>>>>> 
>>>>>>> [root at firelap ~]# ping firelap.usc.unirede.net
>>>>>>> PING firelap.usc.unirede.net (172.16.255.43) 56(84) bytes of 
>>>>>>> data.
>>>>>>> 64 bytes from firelap (172.16.255.43): icmp_seq=1 ttl=64 
>>>>>>> time=0.055 ms
>>>>>>> 
>>>>>>> [root at firelap ~]# engine-setup 
>>>>>>> Welcome to oVirt Engine setup utility
>>>>>>> oVirt Engine uses httpd to proxy requests to the application 
>>>>>>> server.
>>>>>>> It looks like the httpd installed locally is being actively 
>>>>>>> used.
>>>>>>> The installer can override current configuration .
>>>>>>> Alternatively you can use JBoss directly (on ports higher than 
>>>>>>> 1024)
>>>>>>> Do you wish to override current httpd configuration and restart 
>>>>>>> the service? ['yes'| 'no']  [yes] : 
>>>>>>> HTTP Port  [80] : 
>>>>>>> HTTPS Port  [443] : 
>>>>>>> Host fully qualified domain name. Note: this name should be 
>>>>>>> fully resolvable  [firelap.no-ip.org] : localhost.localdomain
>>>>>>> The IP (127.0.0.1) which was resolved from the FQDN 
>>>>>>> localhost.localdomain is not configured on any interface on 
>>>>>>> this host
>>>>>>> User input failed validation, do you still wish to use it? 
>>>>>>> (yes|no): no
>>>>>>> Host fully qualified domain name. Note: this name should be 
>>>>>>> fully resolvable  [firelap.no-ip.org] : 
>>>>>>> firelap.no-ip.org did not resolve into an IP address
>>>>>>> User input failed validation, do you still wish to use it? 
>>>>>>> (yes|no): no
>>>>>>> Host fully qualified domain name. Note: this name should be 
>>>>>>> fully resolvable  [firelap.no-ip.org] : 
>>>>>>> firelap.usc.unirede.net 
>>>>>>> Enter a password for an internal oVirt Engine administrator 
>>>>>>> user (admin at internal) :
>>>>>>> Warning: Weak Password.
>>>>>>> Confirm password :
>>>>>>> Organization Name for the Certificate  [no-ip.org] : 
>>>>>>> firelap.usc.unirede.net 
>>>>>>> The engine can be configured to present the UI in three 
>>>>>>> different application modes. virt [Manage virtualization only], 
>>>>>>> gluster [Manage gluster storage only], and both [Manage 
>>>>>>> virtualization as well as gluster storage] ['virt'| 'gluster'| 
>>>>>>> 'both']  [both] : 
>>>>>>> The default storage type you will be using  ['NFS'| 'FC'| 
>>>>>>> 'ISCSI'| 'POSIXFS']  [NFS] : 
>>>>>>> Enter DB type for installation ['remote'| 'local']  [local] : 
>>>>>>> Enter a password for a local oVirt Engine DB admin user 
>>>>>>> (engine) :
>>>>>>> Warning: Weak Password.
>>>>>>> Confirm password :
>>>>>>> Local ISO domain path  [/var/lib/exports/iso] : 
>>>>>>> /firebackup/ovirt/iso
>>>>>>> Error: directory /firebackup/ovirt/iso is not empty
>>>>>>> Local ISO domain path  [/var/lib/exports/iso] : 
>>>>>>> /firebackup/ovirt/iso
>>>>>>> Firewall ports need to be opened.
>>>>>>> The installer can configure firewall automatically overriding 
>>>>>>> the current configuration. The old configuration will be backed 
>>>>>>> up.
>>>>>>> Alternately you can configure the firewall later using an 
>>>>>>> example file. 
>>>>>>> Which firewall do you wish to configure? ['None'| 'Firewalld'| 
>>>>>>> 'IPTables']: IPTables
>>>>>>> Configure VDSM on this host? ['yes'| 'no']  [yes] : 
>>>>>>> Local storage domain path  [/var/lib/images] : 
>>>>>>> /firebackup/ovirt/vms
>>>>>>> Confirm root password :
>>>>>>> 
>>>>>>> oVirt Engine will be installed using the following 
>>>>>>> configuration:
>>>>>>> =================================================================
>>>>>>> override-httpd-config:         yes
>>>>>>> http-port:                     80
>>>>>>> https-port:                    443
>>>>>>> host-fqdn:                     firelap.usc.unirede.net
>>>>>>> auth-pass:                     ********
>>>>>>> org-name:                     
>>>>>>>  firelap.usc.unirede.net
>>>>>>> application-mode:              both
>>>>>>> default-dc-type:               NFS
>>>>>>> db-remote-install:             local
>>>>>>> db-local-pass:                 ********
>>>>>>> nfs-mp:                        /firebackup/ovirt/iso
>>>>>>> override-firewall:             IPTables
>>>>>>> config-allinone:               yes
>>>>>>> storage-path:                  /firebackup/ovirt/vms
>>>>>>> superuser-pass:                ********
>>>>>>> Proceed with the configuration listed above? (yes|no): yes
>>>>>>> 
>>>>>>> Installing:
>>>>>>> AIO: Validating CPU Compatibility...                   
>>>>>>>            [ DONE ]
>>>>>>> AIO: Adding firewall rules...                       
>>>>>>>               [ DONE ]
>>>>>>> Configuring oVirt Engine...                         
>>>>>>>               [ DONE ]
>>>>>>> Configuring JVM...                               
>>>>>>>                  [ DONE ]
>>>>>>> Creating CA...                                 
>>>>>>>                    [ DONE ]
>>>>>>> Updating ovirt-engine service...                     
>>>>>>>              [ DONE ]
>>>>>>> Setting Database Configuration...                     
>>>>>>>             [ DONE ]
>>>>>>> Setting Database Security...                       
>>>>>>>                [ DONE ]
>>>>>>> Creating Database...                             
>>>>>>>                  [ DONE ]
>>>>>>> Updating the Default Data Center Storage Type...           
>>>>>>>        [ DONE ]
>>>>>>> Editing oVirt Engine Configuration...                 
>>>>>>>             [ DONE ]
>>>>>>> Editing Postgresql Configuration...                   
>>>>>>>             [ DONE ]
>>>>>>> Configuring the Default ISO Domain...                 
>>>>>>>             [ DONE ]
>>>>>>> Configuring Firewall...                           
>>>>>>>                 [ DONE ]
>>>>>>> Starting ovirt-engine Service...                     
>>>>>>>              [ DONE ]
>>>>>>> Configuring HTTPD...                             
>>>>>>>                  [ DONE ]
>>>>>>> AIO: Creating storage directory...                   
>>>>>>>              [ DONE ]
>>>>>>> AIO: Adding Local Datacenter and cluster...             
>>>>>>>           [ DONE ]
>>>>>>> AIO: Adding Local host (This may take several minutes)...     
>>>>>>>  [ ERROR ]
>>>>>>> Error: Host was found in a 'Failed' state. Please check engine 
>>>>>>> and bootstrap installation logs.
>>>>>>> Please check log file 
>>>>>>> /var/log/ovirt-engine/engine-setup_2013_03_06_14_30_51.log for 
>>>>>>> more information
>>>>>>> 
>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 
>>>>>>> 0
>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils::1238::root:: stopping 
>>>>>>> httpd
>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: 
>>>>>>> executing action httpd on service stop
>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing 
>>>>>>> command --> '/sbin/service httpd stop'
>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils::472::root:: output = 
>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils::473::root:: stderr = 
>>>>>>> Redirecting to /bin/systemctl stop  httpd.service
>>>>>>> 
>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 
>>>>>>> 0
>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils::1228::root:: starting 
>>>>>>> httpd
>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: 
>>>>>>> executing action httpd on service start
>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing 
>>>>>>> command --> '/sbin/service httpd start'
>>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils::472::root:: output = 
>>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils::473::root:: stderr = 
>>>>>>> Redirecting to /bin/systemctl start  httpd.service
>>>>>>> 
>>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils::474::root:: retcode = 
>>>>>>> 0
>>>>>>> 2013-03-06 14:35:36::DEBUG::setup_sequences::59::root:: running 
>>>>>>> makeStorageDir
>>>>>>> 2013-03-06 14:35:36::DEBUG::all_in_one_100::368::root:: 
>>>>>>> Creating/Verifying local domain path
>>>>>>> 2013-03-06 14:35:36::DEBUG::all_in_one_100::374::root:: Setting 
>>>>>>> selinux context
>>>>>>> 2013-03-06 14:35:36::DEBUG::nfsutils::36::root:: setting 
>>>>>>> selinux context for /firebackup/ovirt/vms
>>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils::434::root:: Executing 
>>>>>>> command --> '/usr/sbin/semanage fcontext -a -t 
>>>>>>> public_content_rw_t /firebackup/ovirt/vms(/.*)?'
>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output = 
>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr = 
>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 
>>>>>>> 0
>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils::434::root:: Executing 
>>>>>>> command --> '/sbin/restorecon -r /firebackup/ovirt/vms'
>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output = 
>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr = 
>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 
>>>>>>> 0
>>>>>>> 2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running 
>>>>>>> waitForJbossUp
>>>>>>> 2013-03-06 14:35:39::DEBUG::all_in_one_100::445::root:: 
>>>>>>> Checking JBoss status.
>>>>>>> 2013-03-06 14:35:39::INFO::all_in_one_100::448::root:: JBoss is 
>>>>>>> up and running.
>>>>>>> 2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running 
>>>>>>> initAPI
>>>>>>> 2013-03-06 14:35:39::DEBUG::all_in_one_100::240::root:: 
>>>>>>> Initiating the API object
>>>>>>> 2013-03-06 14:35:41::DEBUG::setup_sequences::59::root:: running 
>>>>>>> createDC
>>>>>>> 2013-03-06 14:35:41::DEBUG::all_in_one_100::256::root:: 
>>>>>>> Creating the local datacenter
>>>>>>> 2013-03-06 14:35:42::DEBUG::setup_sequences::59::root:: running 
>>>>>>> createCluster
>>>>>>> 2013-03-06 14:35:42::DEBUG::all_in_one_100::267::root:: 
>>>>>>> Creating the local cluster
>>>>>>> 2013-03-06 14:35:43::DEBUG::setup_sequences::59::root:: running 
>>>>>>> createHost
>>>>>>> 2013-03-06 14:35:43::DEBUG::all_in_one_100::280::root:: Adding 
>>>>>>> the local host
>>>>>>> 2013-03-06 14:35:44::DEBUG::setup_sequences::59::root:: running 
>>>>>>> waitForHostUp
>>>>>>> 2013-03-06 14:35:44::DEBUG::all_in_one_100::297::root:: Waiting 
>>>>>>> for host to become operational
>>>>>>> 2013-03-06 14:35:45::DEBUG::all_in_one_100::300::root:: current 
>>>>>>> host status is: installing
>>>>>>> 2013-03-06 14:35:45::DEBUG::all_in_one_100::311::root:: 
>>>>>>> Traceback (most recent call last):
>>>>>>>   File 
>>>>>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>>>>>> line 308, in isHostUp
>>>>>>>     raise Exception(INFO_CREATE_HOST_WAITING_UP)
>>>>>>> Exception: Waiting for the host to start
>>>>>>> 
>>>>>>> 2013-03-06 14:35:50::DEBUG::all_in_one_100::297::root:: Waiting 
>>>>>>> for host to become operational
>>>>>>> 2013-03-06 14:35:50::DEBUG::all_in_one_100::300::root:: current 
>>>>>>> host status is: installing
>>>>>>> 2013-03-06 14:35:50::DEBUG::all_in_one_100::311::root:: 
>>>>>>> Traceback (most recent call last):
>>>>>>>   File 
>>>>>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>>>>>> line 308, in isHostUp
>>>>>>>     raise Exception(INFO_CREATE_HOST_WAITING_UP)
>>>>>>> Exception: Waiting for the host to start
>>>>>>> 
>>>>>>> 2013-03-06 14:35:55::DEBUG::all_in_one_100::297::root:: Waiting 
>>>>>>> for host to become operational
>>>>>>> 2013-03-06 14:35:56::DEBUG::all_in_one_100::300::root:: current 
>>>>>>> host status is: install_failed
>>>>>>> 2013-03-06 14:35:56::DEBUG::all_in_one_100::311::root:: 
>>>>>>> Traceback (most recent call last):
>>>>>>>   File 
>>>>>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>>>>>> line 306, in isHostUp
>>>>>>>     raise utils.RetryFailException(ERROR_CREATE_HOST_FAILED)
>>>>>>> RetryFailException: Error: Host was found in a 'Failed' state. 
>>>>>>> Please check engine and bootstrap installation logs.
>>>>>>> 
>>>>>>> 2013-03-06 14:35:56::DEBUG::setup_sequences::62::root:: 
>>>>>>> Traceback (most recent call last):
>>>>>>>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", 
>>>>>>> line 60, in run
>>>>>>>     function()
>>>>>>>   File 
>>>>>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>>>>>> line 294, in waitForHostUp
>>>>>>>     utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>>>>>>>   File "/usr/share/ovirt-engine/scripts/common_utils.py", line 
>>>>>>> 1009, in retry
>>>>>>>     raise e
>>>>>>> RetryFailException: Error: Host was found in a 'Failed' state. 
>>>>>>> Please check engine and bootstrap installation logs.
>>>>>>> 
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1948::root:: *** The 
>>>>>>> following params were used as user input:
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> override-httpd-config: yes
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> http-port: 80
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> https-port: 443
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> random-passwords: no
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> mac-range: 00:1A:4A:10:FF:00-00:1A:4A:10:FF:FF
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> host-fqdn: firelap.usc.unirede.net
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> auth-pass: ********
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> org-name: firelap.usc.unirede.net
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> application-mode: both
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> default-dc-type: NFS
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> db-remote-install: local
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-host: 
>>>>>>> localhost
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> db-local-pass: ********
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: nfs-mp: 
>>>>>>> /firebackup/********/iso
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> iso-domain-name: ISO_DOMAIN
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> config-nfs: yes
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> override-firewall: IPTables
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> config-allinone: yes
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> storage-path: /firebackup/********/vms
>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: 
>>>>>>> superuser-pass: ********
>>>>>>> 2013-03-06 14:35:56::ERROR::engine-setup::2369::root:: 
>>>>>>> Traceback (most recent call last):
>>>>>>>   File "/bin/engine-setup", line 2363, in <module>
>>>>>>>     main(confFile)
>>>>>>>   File "/bin/engine-setup", line 2146, in main
>>>>>>>     runSequences()
>>>>>>>   File "/bin/engine-setup", line 2068, in runSequences
>>>>>>>     controller.runAllSequences()
>>>>>>>   File "/usr/share/ovirt-engine/scripts/setup_controller.py", 
>>>>>>> line 54, in runAllSequences
>>>>>>>     sequence.run()
>>>>>>>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", 
>>>>>>> line 154, in run
>>>>>>>     step.run()
>>>>>>>   File "/usr/share/ovirt-engine/scripts/setup_sequences.py", 
>>>>>>> line 60, in run
>>>>>>>     function()
>>>>>>>   File 
>>>>>>> "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", 
>>>>>>> line 294, in waitForHostUp
>>>>>>>     utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>>>>>>>   File "/usr/share/ovirt-engine/scripts/common_utils.py", line 
>>>>>>> 1009, in retry
>>>>>>>     raise e
>>>>>>> RetryFailException: Error: Host was found in a 'Failed' state. 
>>>>>>> Please check engine and bootstrap installation logs.
>>>>>>> 
>>>>>>>    Thnkz for attention. 
>>>>>>> 
>>>>>>> Marcelo Barbosa
>>>>>>> mr.marcelo.barbosa at gmail.com
>>>>>>> 
>>>>>>> 
>>>>>>  
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>  
>>>>> 
>>>>  
>>>> 
>>>> 
>>>  
>>> 
>> 
>> 
> 
> 




More information about the Users mailing list