[Users] Problem install
Marcelo Barbosa
mr.marcelo.barbosa at gmail.com
Tue Mar 19 14:52:13 UTC 2013
Alex,
I run again, but error persist:
[root at firelap marcelo.barbosa]# engine-setup
Welcome to oVirt Engine setup utility
oVirt Engine uses httpd to proxy requests to the application server.
It looks like the httpd installed locally is being actively used.
The installer can override current configuration .
Alternatively you can use JBoss directly (on ports higher than 1024)
Do you wish to override current httpd configuration and restart the
service? ['yes'| 'no'] [yes] : yees
Error: response is not part of the following accepted answers: yes, no
oVirt Engine uses httpd to proxy requests to the application server.
It looks like the httpd installed locally is being actively used.
The installer can override current configuration .
Alternatively you can use JBoss directly (on ports higher than 1024)
Do you wish to override current httpd configuration and restart the
service? ['yes'| 'no'] [yes] :
HTTP Port [80] :
HTTPS Port [443] :
Host fully qualified domain name. Note: this name should be fully
resolvable [firelap.local] :
firelap.local did not resolve into an IP address
User input failed validation, do you still wish to use it? (yes|no): yes
Enter a password for an internal oVirt Engine administrator user
(admin at internal) :
Warning: Weak Password.
Confirm password :
Organization Name for the Certificate [local] :
The engine can be configured to present the UI in three different
application modes. virt [Manage virtualization only], gluster [Manage
gluster storage only], and both [Manage virtualization as well as gluster
storage] ['virt'| 'gluster'| 'both'] [both] :
The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'|
'POSIXFS'] [NFS] :
Enter DB type for installation ['remote'| 'local'] [local] :
Enter a password for a local oVirt Engine DB admin user (engine) :
Warning: Weak Password.
Confirm password :
Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso
Firewall ports need to be opened.
The installer can configure firewall automatically overriding the current
configuration. The old configuration will be backed up.
Alternately you can configure the firewall later using an example file.
Which firewall do you wish to configure? ['None'| 'Firewalld'| 'IPTables']:
IPTables
Configure VDSM on this host? ['yes'| 'no'] [yes] :
Local storage domain path [/var/lib/images] : /firebackup/ovirt/vms
Confirm root password :
oVirt Engine will be installed using the following configuration:
=================================================================
override-httpd-config: yes
http-port: 80
https-port: 443
host-fqdn: firelap.local
auth-pass: ********
org-name: local
application-mode: both
default-dc-type: NFS
db-remote-install: local
db-local-pass: ********
nfs-mp: /firebackup/ovirt/iso
override-firewall: IPTables
config-allinone: yes
storage-path: /firebackup/ovirt/vms
superuser-pass: ********
Proceed with the configuration listed above? (yes|no): yes
Installing:
AIO: Validating CPU Compatibility... [ DONE ]
AIO: Adding firewall rules... [ DONE ]
Configuring oVirt Engine... [ DONE ]
Configuring JVM... [ DONE ]
Creating CA... [ DONE ]
Updating ovirt-engine service... [ DONE ]
Setting Database Configuration... [ DONE ]
Setting Database Security... [ DONE ]
Creating Database... [ DONE ]
Updating the Default Data Center Storage Type... [ DONE ]
Editing oVirt Engine Configuration... [ DONE ]
Editing Postgresql Configuration... [ DONE ]
Configuring the Default ISO Domain... [ DONE ]
Configuring Firewall... [ DONE ]
Starting ovirt-engine Service... [ DONE ]
Configuring HTTPD... [ DONE ]
AIO: Creating storage directory... [ DONE ]
AIO: Adding Local Datacenter and cluster... [ DONE ]
AIO: Adding Local host (This may take several minutes)... [ ERROR ]
Error: Host was found in a 'Failed' state. Please check engine and
bootstrap installation logs.
Please check log file
/var/log/ovirt-engine/engine-setup_2013_03_19_11_45_12.log for more
information
Log in attached.
View config modified:
[root at firelap marcelo.barbosa]# cat /etc/sysconfig/wdmd
# WDMDOPTS -- set the command line options for the wdmd daemon
# See wdmd man page for full list of command line options.
#
# Include "-G sanlock" in the option string.
#
# To enable use of test scripts
WDMDOPTS="-G sanlock -S 1"
#
# To select a specific watchdog device
WDMDOPTS="-G sanlock -w /dev/watchdog1"
Marcelo Barbosa
*mr.marcelo.barbosa at gmail.com*
On Tue, Mar 19, 2013 at 11:39 AM, Alex Lourie <alourie at redhat.com> wrote:
> Hi Marcelo
>
> Let's try something else.
>
> Run
>
> sed -i 's/\#WDMDOPTS/WDMDOPTS/g' /etc/sysconfig/wdmd
>
> And try running the setup again.
>
>
> On Tue, Mar 19, 2013 at 4:26 PM, Marcelo Barbosa <
> mr.marcelo.barbosa at gmail.com> wrote:
>
>> Alex,
>>
>> Follows the file:
>>
>> [root at firelap marcelo.barbosa]# cat /etc/sysconfig/wdmd
>> # WDMDOPTS -- set the command line options for the wdmd daemon
>> # See wdmd man page for full list of command line options.
>> #
>> # Include "-G sanlock" in the option string.
>> #
>> # To enable use of test scripts
>> #WDMDOPTS="-G sanlock -S 1"
>> #
>> # To select a specific watchdog device
>> #WDMDOPTS="-G sanlock -w /dev/watchdog1"
>>
>> I tried again, but error:
>>
>> 2013-03-19 11:05:33::ERROR::engine-setup:**:2385::root:: Traceback (most
>> recent call last):
>> File "/bin/engine-setup", line 2379, in <module>
>> main(confFile)
>> File "/bin/engine-setup", line 2162, in main
>> runSequences()
>> File "/bin/engine-setup", line 2085, in runSequences
>> controller.runAllSequences()
>> File "/usr/share/ovirt-engine/**scripts/setup_controller.py", line 54,
>> in runAllSequences
>> sequence.run()
>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", line 154,
>> in run
>> step.run()
>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", line 60,
>> in run
>> function()
>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py",
>> line 300, in waitForHostUp
>> utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>> File "/usr/share/ovirt-engine/**scripts/common_utils.py", line 1009,
>> in retry
>> raise e
>> RetryFailException: Error: Host was found in a 'Failed' state. Please
>> check engine and bootstrap installation logs.
>>
>> Full ERROR/LOG in attached.
>>
>> More informations about my enviroment:
>>
>> [root at firelap marcelo.barbosa]# rpm -qa | grep -i ovirt-engine
>> ovirt-engine-setup-plugin-**allinone-3.2.1-1.fc18.noarch
>> ovirt-engine-backend-3.2.1-1.**fc18.noarch
>> ovirt-engine-restapi-3.2.1-1.**fc18.noarch
>> ovirt-engine-genericapi-3.2.1-**1.fc18.noarch
>> ovirt-engine-cli-3.2.0.11-1.**fc18.noarch
>> ovirt-engine-3.2.1-1.fc18.**noarch
>> ovirt-engine-setup-3.2.1-1.**fc18.noarch
>> ovirt-engine-dbscripts-3.2.1-**1.fc18.noarch
>> ovirt-engine-sdk-3.2.0.10-1.**fc18.noarch
>> ovirt-engine-userportal-3.2.1-**1.fc18.noarch
>> ovirt-engine-webadmin-portal-**3.2.1-1.fc18.noarch
>> ovirt-engine-tools-3.2.1-1.**fc18.noarch
>>
>> [root at firelap marcelo.barbosa]# cat /etc/hosts
>> 127.0.0.1 localhost localhost.localdomain localhost4
>> localhost4.localdomain4
>> ::1 localhost localhost.localdomain localhost6
>> localhost6.localdomain6
>> 172.16.255.54 firelap firelap.local
>>
>> [root at firelap marcelo.barbosa]# ifconfig
>> bond0: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500
>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>> RX packets 0 bytes 0 (0.0 B)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 0 bytes 0 (0.0 B)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> bond1: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500
>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>> RX packets 0 bytes 0 (0.0 B)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 0 bytes 0 (0.0 B)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> bond2: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500
>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>> RX packets 0 bytes 0 (0.0 B)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 0 bytes 0 (0.0 B)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> bond3: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500
>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>> RX packets 0 bytes 0 (0.0 B)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 0 bytes 0 (0.0 B)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> bond4: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500
>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>> RX packets 0 bytes 0 (0.0 B)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 0 bytes 0 (0.0 B)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
>> inet 127.0.0.1 netmask 255.0.0.0
>> inet6 ::1 prefixlen 128 scopeid 0x10<host>
>> loop txqueuelen 0 (Local Loopback)
>> RX packets 115968 bytes 34730071 (33.1 MiB)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 115968 bytes 34730071 (33.1 MiB)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>
>> p5p1: flags=4163<UP,BROADCAST,**RUNNING,MULTICAST> mtu 1500
>> inet 172.16.255.54 netmask 255.255.255.192 broadcast
>> 172.16.255.63
>> inet6 fe80::7a45:c4ff:feb0:8995 prefixlen 64 scopeid 0x20<link>
>> ether 78:45:c4:b0:89:95 txqueuelen 1000 (Ethernet)
>> RX packets 1785531 bytes 2623497125 (2.4 GiB)
>> RX errors 0 dropped 0 overruns 0 frame 0
>> TX packets 975613 bytes 76733377 (73.1 MiB)
>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>> device interrupt 17
>>
>> Forever run engine-cleanup before engine-setup
>>
>> [root at localhost ~]# engine-setup
>> Welcome to oVirt Engine setup utility
>> oVirt Engine uses httpd to proxy requests to the application server.
>> It looks like the httpd installed locally is being actively used.
>> The installer can override current configuration .
>> Alternatively you can use JBoss directly (on ports higher than 1024)
>> Do you wish to override current httpd configuration and restart the
>> service? ['yes'| 'no'] [yes] :
>> HTTP Port [80] :
>> HTTPS Port [443] :
>> Host fully qualified domain name. Note: this name should be fully
>> resolvable [firelap.local] :
>> firelap.local did not resolve into an IP address
>> User input failed validation, do you still wish to use it? (yes|no): yes
>> Enter a password for an internal oVirt Engine administrator user
>> (admin at internal) :
>> Warning: Weak Password.
>> Confirm password :
>> Organization Name for the Certificate [local] :
>> The engine can be configured to present the UI in three different
>> application modes. virt [Manage virtualization only], gluster [Manage
>> gluster storage only], and both [Manage virtualization as well as gluster
>> storage] ['virt'| 'gluster'| 'both'] [both] :
>> The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'|
>> 'POSIXFS'] [NFS] :
>> Enter DB type for installation ['remote'| 'local'] [local] :
>> Enter a password for a local oVirt Engine DB admin user (engine) :
>> Warning: Weak Password.
>> Confirm password :
>> Error: passwords don't match
>> Enter a password for a local oVirt Engine DB admin user (engine) :
>> Warning: Weak Password.
>> Confirm password :
>> Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso
>> Error: mount point already exists in /etc/exports
>> Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso
>> Firewall ports need to be opened.
>> The installer can configure firewall automatically overriding the current
>> configuration. The old configuration will be backed up.
>> Alternately you can configure the firewall later using an example file.
>> Which firewall do you wish to configure? ['None'| 'Firewalld'|
>> 'IPTables']: IPTables
>> Configure VDSM on this host? ['yes'| 'no'] [yes] :
>> Local storage domain path [/var/lib/images] : /firebackup/ovirt/vms
>> Confirm root password :
>>
>> oVirt Engine will be installed using the following configuration:
>> ==============================**==============================**=====
>> override-httpd-config: yes
>> http-port: 80
>> https-port: 443
>> host-fqdn: firelap.local
>> auth-pass: ********
>> org-name: local
>> application-mode: both
>> default-dc-type: NFS
>> db-remote-install: local
>> db-local-pass: ********
>> nfs-mp: /firebackup/ovirt/iso
>> override-firewall: IPTables
>> config-allinone: yes
>> storage-path: /firebackup/ovirt/vms
>> superuser-pass: ********
>> Proceed with the configuration listed above? (yes|no): yes
>>
>> Installing:
>> AIO: Validating CPU Compatibility... [ DONE ]
>> AIO: Adding firewall rules... [ DONE ]
>> Configuring oVirt Engine... [ DONE ]
>> Configuring JVM... [ DONE ]
>> Creating CA... [ DONE ]
>> Updating ovirt-engine service... [ DONE ]
>> Setting Database Configuration... [ DONE ]
>> Setting Database Security... [ DONE ]
>> Creating Database... [ DONE ]
>> Updating the Default Data Center Storage Type... [ DONE ]
>> Editing oVirt Engine Configuration... [ DONE ]
>> Editing Postgresql Configuration... [ DONE ]
>> Configuring the Default ISO Domain... [ DONE ]
>> Configuring Firewall... [ DONE ]
>> Starting ovirt-engine Service... [ DONE ]
>> Configuring HTTPD... [ DONE ]
>> AIO: Creating storage directory... [ DONE ]
>> AIO: Adding Local Datacenter and cluster... [ DONE ]
>> AIO: Adding Local host (This may take several minutes)... [ ERROR ]
>> Error: Host was found in a 'Failed' state. Please check engine and
>> bootstrap installation logs.
>> Please check log file /var/log/ovirt-engine/engine-**setup_2013_03_19_11_00_51.log
>> for more information
>>
>> Let me know if you need any additional tests, thank you for attention.
>>
>> Marcelo Barbosa
>> mr.marcelo.barbosa at gmail.com
>>
>>
>> On Tue, Mar 19, 2013 at 10:51 AM, Marcelo Barbosa <
>> mr.marcelo.barbosa at gmail.com> wrote:
>>
>>> Alex,
>>>
>>> i am check:
>>>
>>> # rpm -qa | grep sanlock
>>> sanlock-2.6-7.fc18.x86_64
>>> libvirt-lock-sanlock-0.10.2.3-**1.fc18.x86_64
>>> sanlock-lib-2.6-7.fc18.x86_64
>>> sanlock-python-2.6-7.fc18.x86_**64
>>>
>>> you would like make reinstall ? I can try again...
>>>
>>> Marcelo Barbosa
>>> mr.marcelo.barbosa at gmail.com
>>>
>>>
>>> On Tue, Mar 19, 2013 at 10:30 AM, Alex Lourie <alourie at redhat.com>
>>> wrote:
>>>
>>>> Hi Marcelo
>>>>
>>>> Can you please check that you have sanlock-2.6-7 installed?
>>>>
>>>> Thanks.
>>>>
>>>> On Wed, Mar 6, 2013 at 10:51 PM, Marcelo Barbosa <
>>>> mr.marcelo.barbosa at gmail.com> wrote:
>>>>
>>>>> Alex,
>>>>>
>>>>> Thankyou for attention. This return should not happen, because I
>>>>> have my hostname registered and running on my DNS servers, but i'm inserted
>>>>> in /etc/hosts my hostname and retry setup, but return new error:
>>>>>
>>>>>
>>>>> 2013-03-06 17:35:14::DEBUG::all_in_one_**100::297::root:: Waiting for
>>>>> host to become operational
>>>>> 2013-03-06 17:35:14::DEBUG::all_in_one_**100::300::root:: current
>>>>> host status is: up
>>>>> 2013-03-06 17:35:14::DEBUG::all_in_one_**100::302::root:: The host is
>>>>> up.
>>>>> 2013-03-06 17:35:14::DEBUG::setup_**sequences::59::root:: running
>>>>> addStorageDomain
>>>>> 2013-03-06 17:35:14::DEBUG::all_in_one_**100::317::root:: Adding
>>>>> local storage domain
>>>>> 2013-03-06 17:35:14::INFO::all_in_one_**100::322::root:: Creating
>>>>> local storage
>>>>> 2013-03-06 17:35:14::INFO::all_in_one_**100::326::root:: Creating
>>>>> local storage domain
>>>>> 2013-03-06 17:35:14::INFO::all_in_one_**100::334::root:: Adding local
>>>>> storage domain
>>>>> 2013-03-06 17:35:15::ERROR::all_in_one_**100::337::root:: Traceback
>>>>> (most recent call last):
>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py",
>>>>> line 335, in addStorageDomain
>>>>> controller.CONF["API_OBJECT"].**storagedomains.add(sdParams)
>>>>> File "/usr/lib/python2.7/site-**packages/ovirtsdk/**infrastructure/brokers.py",
>>>>> line 5151, in add
>>>>> headers={"Expect":expect, "Correlation-Id":correlation_**id})
>>>>> File "/usr/lib/python2.7/site-**packages/ovirtsdk/**infrastructure/proxy.py",
>>>>> line 118, in add
>>>>> return self.request('POST', url, body, headers)
>>>>> File "/usr/lib/python2.7/site-**packages/ovirtsdk/**infrastructure/proxy.py",
>>>>> line 129, in request
>>>>> last=last)
>>>>> File "/usr/lib/python2.7/site-**packages/ovirtsdk/**infrastructure/proxy.py",
>>>>> line 159, in __doRequest
>>>>> raise RequestError, response
>>>>> RequestError:
>>>>> status: 400
>>>>> reason: Bad Request
>>>>> detail: Cannot add Storage. Internal error, Storage Connection doesn't
>>>>> exist.
>>>>>
>>>>> 2013-03-06 17:35:15::DEBUG::setup_**sequences::62::root:: Traceback
>>>>> (most recent call last):
>>>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", line
>>>>> 60, in run
>>>>> function()
>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py",
>>>>> line 338, in addStorageDomain
>>>>> raise Exception(ERROR_ADD_LOCAL_**DOMAIN)
>>>>> Exception: Error: could not add local storage domain
>>>>>
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1948::root:: *** The
>>>>> following params were used as user input:
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> override-httpd-config: yes
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: http-port: 80
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: https-port:
>>>>> 443
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> random-passwords: no
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: mac-range:
>>>>> 00:1A:4A:10:FF:00-00:1A:4A:10:**FF:FF
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: host-fqdn:
>>>>> firelap.usc.unirede.net
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: auth-pass:
>>>>> ********
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: org-name:
>>>>> firelap
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> application-mode: both
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> default-dc-type: NFS
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> db-remote-install: local
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: db-host:
>>>>> localhost
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> db-local-pass: ********
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: nfs-mp:
>>>>> /firebackup/********/iso
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> iso-domain-name: ISO_DOMAIN
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root:: config-nfs:
>>>>> yes
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> override-firewall: IPTables
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> config-allinone: yes
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> storage-path: /firebackup/********/vms
>>>>> 2013-03-06 17:35:15::DEBUG::engine-setup:**:1953::root::
>>>>> superuser-pass: ********
>>>>> 2013-03-06 17:35:15::ERROR::engine-setup:**:2369::root:: Traceback
>>>>> (most recent call last):
>>>>> File "/bin/engine-setup", line 2363, in <module>
>>>>> main(confFile)
>>>>> File "/bin/engine-setup", line 2146, in main
>>>>> runSequences()
>>>>> File "/bin/engine-setup", line 2068, in runSequences
>>>>> controller.runAllSequences()
>>>>> File "/usr/share/ovirt-engine/**scripts/setup_controller.py", line
>>>>> 54, in runAllSequences
>>>>> sequence.run()
>>>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", line
>>>>> 154, in run
>>>>> step.run()
>>>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py", line
>>>>> 60, in run
>>>>> function()
>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py",
>>>>> line 338, in addStorageDomain
>>>>> raise Exception(ERROR_ADD_LOCAL_**DOMAIN)
>>>>> Exception: Error: could not add local storage domain
>>>>>
>>>>> Any ideas to solve this problem?
>>>>>
>>>>> Marcelo Barbosa
>>>>> mr.marcelo.barbosa at gmail.com
>>>>>
>>>>>
>>>>> On Wed, Mar 6, 2013 at 4:23 PM, Alexandre Santos <santosam72 at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi. Have you tried solving the hostnames resolving issues that are
>>>>>> described on your email? Add the hosts to /etc/hosts
>>>>>>
>>>>>> Alex
>>>>>>
>>>>>> No dia 06/03/2013 18:02, "Marcelo Barbosa" <
>>>>>> mr.marcelo.barbosa at gmail.com> escreveu:
>>>>>>
>>>>>>> Attached my log file.
>>>>>>>
>>>>>>> Marcelo Barbosa
>>>>>>> mr.marcelo.barbosa at gmail.com
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Mar 6, 2013 at 2:48 PM, Marcelo Barbosa <
>>>>>>> mr.marcelo.barbosa at gmail.com> wrote:
>>>>>>>
>>>>>>>> hi guys,
>>>>>>>>
>>>>>>>> I'am tryed install Ovirt 3.2 all-in-one in my Fedora 18, but
>>>>>>>> this version not finish for sucessful install, information my enviroment:
>>>>>>>>
>>>>>>>> [root at firelap ovirt]# cat /etc/redhat-release
>>>>>>>> Fedora release 18 (Spherical Cow)
>>>>>>>>
>>>>>>>> [root at firelap ovirt]# uname -a
>>>>>>>> Linux firelap 3.7.9-205.fc18.x86_64 #1 SMP Sun Feb 24 20:10:02 UTC
>>>>>>>> 2013 x86_64 x86_64 x86_64 GNU/Linux
>>>>>>>>
>>>>>>>> [root at firelap ovirt]# ifconfig
>>>>>>>> bond0: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500
>>>>>>>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>>>>>>>> RX packets 0 bytes 0 (0.0 B)
>>>>>>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>>>>>> TX packets 0 bytes 0 (0.0 B)
>>>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>>>>>>
>>>>>>>> bond1: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500
>>>>>>>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>>>>>>>> RX packets 0 bytes 0 (0.0 B)
>>>>>>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>>>>>> TX packets 0 bytes 0 (0.0 B)
>>>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>>>>>>
>>>>>>>> bond2: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500
>>>>>>>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>>>>>>>> RX packets 0 bytes 0 (0.0 B)
>>>>>>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>>>>>> TX packets 0 bytes 0 (0.0 B)
>>>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>>>>>>
>>>>>>>> bond3: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500
>>>>>>>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>>>>>>>> RX packets 0 bytes 0 (0.0 B)
>>>>>>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>>>>>> TX packets 0 bytes 0 (0.0 B)
>>>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>>>>>>
>>>>>>>> bond4: flags=5123<UP,BROADCAST,**MASTER,MULTICAST> mtu 1500
>>>>>>>> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet)
>>>>>>>> RX packets 0 bytes 0 (0.0 B)
>>>>>>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>>>>>> TX packets 0 bytes 0 (0.0 B)
>>>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>>>>>>
>>>>>>>> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
>>>>>>>> inet 127.0.0.1 netmask 255.0.0.0
>>>>>>>> inet6 ::1 prefixlen 128 scopeid 0x10<host>
>>>>>>>> loop txqueuelen 0 (Local Loopback)
>>>>>>>> RX packets 136972 bytes 54834621 (52.2 MiB)
>>>>>>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>>>>>> TX packets 136972 bytes 54834621 (52.2 MiB)
>>>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>>>>>>
>>>>>>>> p5p1: flags=4163<UP,BROADCAST,**RUNNING,MULTICAST> mtu 1500
>>>>>>>> inet 172.16.255.43 netmask 255.255.255.192 broadcast
>>>>>>>> 172.16.255.63
>>>>>>>> inet6 fe80::7a45:c4ff:feb0:8995 prefixlen 64 scopeid
>>>>>>>> 0x20<link>
>>>>>>>> ether 78:45:c4:b0:89:95 txqueuelen 1000 (Ethernet)
>>>>>>>> RX packets 480681 bytes 614801393 (586.3 MiB)
>>>>>>>> RX errors 0 dropped 0 overruns 0 frame 0
>>>>>>>> TX packets 323373 bytes 35479386 (33.8 MiB)
>>>>>>>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>>>>>>>> device interrupt 17
>>>>>>>>
>>>>>>>> [root at firelap ovirt]# rpm -qa | grep ovirt
>>>>>>>> ovirt-engine-cli-3.2.0.10-1.**fc18.noarch
>>>>>>>> ovirt-engine-backend-3.2.0-4.**fc18.noarch
>>>>>>>> ovirt-engine-config-3.2.0-4.**fc18.noarch
>>>>>>>> ovirt-host-deploy-1.0.0-1.**fc18.noarch
>>>>>>>> ovirt-engine-setup-plugin-**allinone-3.2.0-4.fc18.noarch
>>>>>>>> ovirt-engine-restapi-3.2.0-4.**fc18.noarch
>>>>>>>> ovirt-engine-dbscripts-3.2.0-**4.fc18.noarch
>>>>>>>> ovirt-image-uploader-3.2.0-1.**fc18.noarch
>>>>>>>> ovirt-host-deploy-offline-1.0.**0-1.fc18.noarch
>>>>>>>> ovirt-engine-setup-3.2.0-4.**fc18.noarch
>>>>>>>> ovirt-release-fedora-5-3.**noarch
>>>>>>>> ovirt-engine-tools-common-3.2.**0-4.fc18.noarch
>>>>>>>> ovirt-engine-3.2.0-4.fc18.**noarch
>>>>>>>> ovirt-log-collector-3.2.0-1.**fc18.noarch
>>>>>>>> ovirt-host-deploy-java-1.0.0-**1.fc18.noarch
>>>>>>>> ovirt-engine-userportal-3.2.0-**4.fc18.noarch
>>>>>>>> ovirt-engine-notification-**service-3.2.0-4.fc18.noarch
>>>>>>>> ovirt-iso-uploader-3.2.0-1.**fc18.noarch
>>>>>>>> ovirt-engine-webadmin-portal-**3.2.0-4.fc18.noarch
>>>>>>>> ovirt-engine-sdk-3.2.0.9-1.**fc18.noarch
>>>>>>>> ovirt-engine-genericapi-3.2.0-**4.fc18.noarch
>>>>>>>>
>>>>>>>> [root at firelap ~]# host firelap.usc.unirede.net
>>>>>>>> firelap.usc.unirede.net has address 172.16.255.43
>>>>>>>>
>>>>>>>> [root at firelap ~]# ping firelap.usc.unirede.net
>>>>>>>> PING firelap.usc.unirede.net (172.16.255.43) 56(84) bytes of data.
>>>>>>>> 64 bytes from firelap (172.16.255.43): icmp_seq=1 ttl=64
>>>>>>>> time=0.055 ms
>>>>>>>>
>>>>>>>> [root at firelap ~]# engine-setup
>>>>>>>> Welcome to oVirt Engine setup utility
>>>>>>>> oVirt Engine uses httpd to proxy requests to the application server.
>>>>>>>> It looks like the httpd installed locally is being actively used.
>>>>>>>> The installer can override current configuration .
>>>>>>>> Alternatively you can use JBoss directly (on ports higher than 1024)
>>>>>>>> Do you wish to override current httpd configuration and restart the
>>>>>>>> service? ['yes'| 'no'] [yes] :
>>>>>>>> HTTP Port [80] :
>>>>>>>> HTTPS Port [443] :
>>>>>>>> Host fully qualified domain name. Note: this name should be fully
>>>>>>>> resolvable [firelap.no-ip.org] : localhost.localdomain
>>>>>>>> The IP (127.0.0.1) which was resolved from the FQDN
>>>>>>>> localhost.localdomain is not configured on any interface on this host
>>>>>>>> User input failed validation, do you still wish to use it?
>>>>>>>> (yes|no): no
>>>>>>>> Host fully qualified domain name. Note: this name should be fully
>>>>>>>> resolvable [firelap.no-ip.org] :
>>>>>>>> firelap.no-ip.org did not resolve into an IP address
>>>>>>>> User input failed validation, do you still wish to use it?
>>>>>>>> (yes|no): no
>>>>>>>> Host fully qualified domain name. Note: this name should be fully
>>>>>>>> resolvable [firelap.no-ip.org] : firelap.usc.unirede.net
>>>>>>>> Enter a password for an internal oVirt Engine administrator user
>>>>>>>> (admin at internal) :
>>>>>>>> Warning: Weak Password.
>>>>>>>> Confirm password :
>>>>>>>> Organization Name for the Certificate [no-ip.org] :
>>>>>>>> firelap.usc.unirede.net
>>>>>>>> The engine can be configured to present the UI in three different
>>>>>>>> application modes. virt [Manage virtualization only], gluster [Manage
>>>>>>>> gluster storage only], and both [Manage virtualization as well as gluster
>>>>>>>> storage] ['virt'| 'gluster'| 'both'] [both] :
>>>>>>>> The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'|
>>>>>>>> 'POSIXFS'] [NFS] :
>>>>>>>> Enter DB type for installation ['remote'| 'local'] [local] :
>>>>>>>> Enter a password for a local oVirt Engine DB admin user (engine) :
>>>>>>>> Warning: Weak Password.
>>>>>>>> Confirm password :
>>>>>>>> Local ISO domain path [/var/lib/exports/iso] :
>>>>>>>> /firebackup/ovirt/iso
>>>>>>>> Error: directory /firebackup/ovirt/iso is not empty
>>>>>>>> Local ISO domain path [/var/lib/exports/iso] :
>>>>>>>> /firebackup/ovirt/iso
>>>>>>>> Firewall ports need to be opened.
>>>>>>>> The installer can configure firewall automatically overriding the
>>>>>>>> current configuration. The old configuration will be backed up.
>>>>>>>> Alternately you can configure the firewall later using an example
>>>>>>>> file.
>>>>>>>> Which firewall do you wish to configure? ['None'| 'Firewalld'|
>>>>>>>> 'IPTables']: IPTables
>>>>>>>> Configure VDSM on this host? ['yes'| 'no'] [yes] :
>>>>>>>> Local storage domain path [/var/lib/images] : /firebackup/ovirt/vms
>>>>>>>> Confirm root password :
>>>>>>>>
>>>>>>>> oVirt Engine will be installed using the following configuration:
>>>>>>>> ==============================**==============================**
>>>>>>>> =====
>>>>>>>> override-httpd-config: yes
>>>>>>>> http-port: 80
>>>>>>>> https-port: 443
>>>>>>>> host-fqdn: firelap.usc.unirede.net
>>>>>>>> auth-pass: ********
>>>>>>>> org-name: firelap.usc.unirede.net
>>>>>>>> application-mode: both
>>>>>>>> default-dc-type: NFS
>>>>>>>> db-remote-install: local
>>>>>>>> db-local-pass: ********
>>>>>>>> nfs-mp: /firebackup/ovirt/iso
>>>>>>>> override-firewall: IPTables
>>>>>>>> config-allinone: yes
>>>>>>>> storage-path: /firebackup/ovirt/vms
>>>>>>>> superuser-pass: ********
>>>>>>>> Proceed with the configuration listed above? (yes|no): yes
>>>>>>>>
>>>>>>>> Installing:
>>>>>>>> AIO: Validating CPU Compatibility... [
>>>>>>>> DONE ]
>>>>>>>> AIO: Adding firewall rules... [
>>>>>>>> DONE ]
>>>>>>>> Configuring oVirt Engine... [
>>>>>>>> DONE ]
>>>>>>>> Configuring JVM... [
>>>>>>>> DONE ]
>>>>>>>> Creating CA... [
>>>>>>>> DONE ]
>>>>>>>> Updating ovirt-engine service... [
>>>>>>>> DONE ]
>>>>>>>> Setting Database Configuration... [
>>>>>>>> DONE ]
>>>>>>>> Setting Database Security... [
>>>>>>>> DONE ]
>>>>>>>> Creating Database... [
>>>>>>>> DONE ]
>>>>>>>> Updating the Default Data Center Storage Type... [
>>>>>>>> DONE ]
>>>>>>>> Editing oVirt Engine Configuration... [
>>>>>>>> DONE ]
>>>>>>>> Editing Postgresql Configuration... [
>>>>>>>> DONE ]
>>>>>>>> Configuring the Default ISO Domain... [
>>>>>>>> DONE ]
>>>>>>>> Configuring Firewall... [
>>>>>>>> DONE ]
>>>>>>>> Starting ovirt-engine Service... [
>>>>>>>> DONE ]
>>>>>>>> Configuring HTTPD... [
>>>>>>>> DONE ]
>>>>>>>> AIO: Creating storage directory... [
>>>>>>>> DONE ]
>>>>>>>> AIO: Adding Local Datacenter and cluster... [
>>>>>>>> DONE ]
>>>>>>>> AIO: Adding Local host (This may take several minutes)... [
>>>>>>>> ERROR ]
>>>>>>>> Error: Host was found in a 'Failed' state. Please check engine and
>>>>>>>> bootstrap installation logs.
>>>>>>>> Please check log file /var/log/ovirt-engine/engine-**setup_2013_03_06_14_30_51.log
>>>>>>>> for more information
>>>>>>>>
>>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:474::root:: retcode = 0
>>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:1238::root:: stopping
>>>>>>>> httpd
>>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:1275::root:: executing
>>>>>>>> action httpd on service stop
>>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:434::root:: Executing
>>>>>>>> command --> '/sbin/service httpd stop'
>>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:472::root:: output =
>>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:473::root:: stderr =
>>>>>>>> Redirecting to /bin/systemctl stop httpd.service
>>>>>>>>
>>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:474::root:: retcode = 0
>>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:1228::root:: starting
>>>>>>>> httpd
>>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:1275::root:: executing
>>>>>>>> action httpd on service start
>>>>>>>> 2013-03-06 14:35:34::DEBUG::common_utils:**:434::root:: Executing
>>>>>>>> command --> '/sbin/service httpd start'
>>>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils:**:472::root:: output =
>>>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils:**:473::root:: stderr =
>>>>>>>> Redirecting to /bin/systemctl start httpd.service
>>>>>>>>
>>>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils:**:474::root:: retcode = 0
>>>>>>>> 2013-03-06 14:35:36::DEBUG::setup_**sequences::59::root:: running
>>>>>>>> makeStorageDir
>>>>>>>> 2013-03-06 14:35:36::DEBUG::all_in_one_**100::368::root::
>>>>>>>> Creating/Verifying local domain path
>>>>>>>> 2013-03-06 14:35:36::DEBUG::all_in_one_**100::374::root:: Setting
>>>>>>>> selinux context
>>>>>>>> 2013-03-06 14:35:36::DEBUG::nfsutils::36:**:root:: setting selinux
>>>>>>>> context for /firebackup/ovirt/vms
>>>>>>>> 2013-03-06 14:35:36::DEBUG::common_utils:**:434::root:: Executing
>>>>>>>> command --> '/usr/sbin/semanage fcontext -a -t public_content_rw_t
>>>>>>>> /firebackup/ovirt/vms(/.*)?'
>>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:472::root:: output =
>>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:473::root:: stderr =
>>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:474::root:: retcode = 0
>>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:434::root:: Executing
>>>>>>>> command --> '/sbin/restorecon -r /firebackup/ovirt/vms'
>>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:472::root:: output =
>>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:473::root:: stderr =
>>>>>>>> 2013-03-06 14:35:39::DEBUG::common_utils:**:474::root:: retcode = 0
>>>>>>>> 2013-03-06 14:35:39::DEBUG::setup_**sequences::59::root:: running
>>>>>>>> waitForJbossUp
>>>>>>>> 2013-03-06 14:35:39::DEBUG::all_in_one_**100::445::root:: Checking
>>>>>>>> JBoss status.
>>>>>>>> 2013-03-06 14:35:39::INFO::all_in_one_**100::448::root:: JBoss is
>>>>>>>> up and running.
>>>>>>>> 2013-03-06 14:35:39::DEBUG::setup_**sequences::59::root:: running
>>>>>>>> initAPI
>>>>>>>> 2013-03-06 14:35:39::DEBUG::all_in_one_**100::240::root::
>>>>>>>> Initiating the API object
>>>>>>>> 2013-03-06 14:35:41::DEBUG::setup_**sequences::59::root:: running
>>>>>>>> createDC
>>>>>>>> 2013-03-06 14:35:41::DEBUG::all_in_one_**100::256::root:: Creating
>>>>>>>> the local datacenter
>>>>>>>> 2013-03-06 14:35:42::DEBUG::setup_**sequences::59::root:: running
>>>>>>>> createCluster
>>>>>>>> 2013-03-06 14:35:42::DEBUG::all_in_one_**100::267::root:: Creating
>>>>>>>> the local cluster
>>>>>>>> 2013-03-06 14:35:43::DEBUG::setup_**sequences::59::root:: running
>>>>>>>> createHost
>>>>>>>> 2013-03-06 14:35:43::DEBUG::all_in_one_**100::280::root:: Adding
>>>>>>>> the local host
>>>>>>>> 2013-03-06 14:35:44::DEBUG::setup_**sequences::59::root:: running
>>>>>>>> waitForHostUp
>>>>>>>> 2013-03-06 14:35:44::DEBUG::all_in_one_**100::297::root:: Waiting
>>>>>>>> for host to become operational
>>>>>>>> 2013-03-06 14:35:45::DEBUG::all_in_one_**100::300::root:: current
>>>>>>>> host status is: installing
>>>>>>>> 2013-03-06 14:35:45::DEBUG::all_in_one_**100::311::root::
>>>>>>>> Traceback (most recent call last):
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py",
>>>>>>>> line 308, in isHostUp
>>>>>>>> raise Exception(INFO_CREATE_HOST_**WAITING_UP)
>>>>>>>> Exception: Waiting for the host to start
>>>>>>>>
>>>>>>>> 2013-03-06 14:35:50::DEBUG::all_in_one_**100::297::root:: Waiting
>>>>>>>> for host to become operational
>>>>>>>> 2013-03-06 14:35:50::DEBUG::all_in_one_**100::300::root:: current
>>>>>>>> host status is: installing
>>>>>>>> 2013-03-06 14:35:50::DEBUG::all_in_one_**100::311::root::
>>>>>>>> Traceback (most recent call last):
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py",
>>>>>>>> line 308, in isHostUp
>>>>>>>> raise Exception(INFO_CREATE_HOST_**WAITING_UP)
>>>>>>>> Exception: Waiting for the host to start
>>>>>>>>
>>>>>>>> 2013-03-06 14:35:55::DEBUG::all_in_one_**100::297::root:: Waiting
>>>>>>>> for host to become operational
>>>>>>>> 2013-03-06 14:35:56::DEBUG::all_in_one_**100::300::root:: current
>>>>>>>> host status is: install_failed
>>>>>>>> 2013-03-06 14:35:56::DEBUG::all_in_one_**100::311::root::
>>>>>>>> Traceback (most recent call last):
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py",
>>>>>>>> line 306, in isHostUp
>>>>>>>> raise utils.RetryFailException(**ERROR_CREATE_HOST_FAILED)
>>>>>>>> RetryFailException: Error: Host was found in a 'Failed' state.
>>>>>>>> Please check engine and bootstrap installation logs.
>>>>>>>>
>>>>>>>> 2013-03-06 14:35:56::DEBUG::setup_**sequences::62::root::
>>>>>>>> Traceback (most recent call last):
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py",
>>>>>>>> line 60, in run
>>>>>>>> function()
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py",
>>>>>>>> line 294, in waitForHostUp
>>>>>>>> utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/common_utils.py", line
>>>>>>>> 1009, in retry
>>>>>>>> raise e
>>>>>>>> RetryFailException: Error: Host was found in a 'Failed' state.
>>>>>>>> Please check engine and bootstrap installation logs.
>>>>>>>>
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1948::root:: *** The
>>>>>>>> following params were used as user input:
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> override-httpd-config: yes
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> http-port: 80
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> https-port: 443
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> random-passwords: no
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> mac-range: 00:1A:4A:10:FF:00-00:1A:4A:10:**FF:FF
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> host-fqdn: firelap.usc.unirede.net
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> auth-pass: ********
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: org-name:
>>>>>>>> firelap.usc.unirede.net
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> application-mode: both
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> default-dc-type: NFS
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> db-remote-install: local
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: db-host:
>>>>>>>> localhost
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> db-local-pass: ********
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root:: nfs-mp:
>>>>>>>> /firebackup/********/iso
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> iso-domain-name: ISO_DOMAIN
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> config-nfs: yes
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> override-firewall: IPTables
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> config-allinone: yes
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> storage-path: /firebackup/********/vms
>>>>>>>> 2013-03-06 14:35:56::DEBUG::engine-setup:**:1953::root::
>>>>>>>> superuser-pass: ********
>>>>>>>> 2013-03-06 14:35:56::ERROR::engine-setup:**:2369::root:: Traceback
>>>>>>>> (most recent call last):
>>>>>>>> File "/bin/engine-setup", line 2363, in <module>
>>>>>>>> main(confFile)
>>>>>>>> File "/bin/engine-setup", line 2146, in main
>>>>>>>> runSequences()
>>>>>>>> File "/bin/engine-setup", line 2068, in runSequences
>>>>>>>> controller.runAllSequences()
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/setup_controller.py",
>>>>>>>> line 54, in runAllSequences
>>>>>>>> sequence.run()
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py",
>>>>>>>> line 154, in run
>>>>>>>> step.run()
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/setup_sequences.py",
>>>>>>>> line 60, in run
>>>>>>>> function()
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/plugins/all_in_one_**100.py",
>>>>>>>> line 294, in waitForHostUp
>>>>>>>> utils.retry(isHostUp, tries=120, timeout=600, sleep=5)
>>>>>>>> File "/usr/share/ovirt-engine/**scripts/common_utils.py", line
>>>>>>>> 1009, in retry
>>>>>>>> raise e
>>>>>>>> RetryFailException: Error: Host was found in a 'Failed' state.
>>>>>>>> Please check engine and bootstrap installation logs.
>>>>>>>>
>>>>>>>> Thnkz for attention.
>>>>>>>>
>>>>>>>> Marcelo Barbosa
>>>>>>>> mr.marcelo.barbosa at gmail.com
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> ______________________________**_________________
>>>>>>> Users mailing list
>>>>>>> Users at ovirt.org
>>>>>>> http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org/mailman/listinfo/users>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130319/8350ee0d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: engine-setup_2013_03_19_11_45_12.log
Type: application/octet-stream
Size: 142954 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20130319/8350ee0d/attachment-0001.obj>
More information about the Users
mailing list