[Users] otopi needed on oVirt node?

Alon Bar-Lev alonbl at redhat.com
Tue Mar 19 14:52:50 UTC 2013


I don't follow.

If these are not ovirt-nodes, then no otopi and no ovirt-host-deploy should exist, unless these are all-in-one.

----- Original Message -----
> From: "Gianluca Cecchi" <gianluca.cecchi at gmail.com>
> To: "Alon Bar-Lev" <alonbl at redhat.com>
> Cc: "users" <users at ovirt.org>, "Mike Burns" <mburns at redhat.com>
> Sent: Tuesday, March 19, 2013 4:45:57 PM
> Subject: Re: [Users] otopi needed on oVirt node?
> 
> On Tue, Mar 19, 2013 at 3:23 PM, Alon Bar-Lev <alonbl at redhat.com>
> wrote:
> >
> >
> > ----- Original Message -----
> >> From: "Gianluca Cecchi" <gianluca.cecchi at gmail.com>
> >> To: "users" <users at ovirt.org>
> >> Sent: Tuesday, March 19, 2013 4:20:58 PM
> >> Subject: [Users] otopi needed on oVirt node?
> >>
> >> Hello,
> >> comparing rpm packages installed on two f18 systems that are nodes
> >> of
> >> a 3.2 cluster, I notice this difference:
> >>
> >> > otopi-1.0.0-1.fc18.noarch
> >> > ovirt-host-deploy-1.0.1-1.fc18.noarch
> >
> > This is strange! are you sure the host is ovirt-node?
> >
> >> I think ovirt-host-deploy is not necessary and that I can remove
> >> from
> >> the only node where it is installed.
> >> What about otopi?
> >
> > You need ovirt-host-deploy-offline, a single package, on
> > ovirt-node.
> >
> > Alon
> 
> 
> Based on yum.log f18ovn01 was the second node deployed when engine
> and
> first node were in version 3.2.
> Installed and updated fedora18
> enabled ovirt-stable repo
> installed node from webadmin gui (3.2 engine).
> what I see in yum.log at the date of deploy is only for 4 packages:
> Mar 11 14:34:18 Installed: python-ethtool-0.7-4.fc18.x86_64
> Mar 11 14:34:19 Installed: strace-4.7-2.fc18.x86_64
> Mar 11 14:34:19 Installed: atop-1.26-8.fc18.x86_64
> Mar 11 14:34:20 Installed: 2:libcacard-1.2.2-6.fc18.x86_64
> Mar 11 14:34:21 Installed: m2crypto-0.21.1-9.fc18.x86_64
> Mar 11 14:34:21 Installed: 2:qemu-kvm-tools-1.2.2-6.fc18.x86_64
> Mar 11 14:34:21 Installed:
> yum-plugin-fastestmirror-1.1.31-10.fc18.noarch
> 
> Mar 11 15:46:22 Installed: vdsm-python-4.10.3-9.fc18.x86_64
> Mar 11 15:46:22 Installed: vdsm-xmlrpc-4.10.3-9.fc18.noarch
> Mar 11 15:46:55 Installed: vdsm-4.10.3-9.fc18.x86_64
> Mar 11 15:46:55 Installed: vdsm-cli-4.10.3-9.fc18.noarch
> 
> Mar 11 17:22:13 Erased: kernel-3.8.2-206.fc18.x86_64
> Mar 11 17:22:28 Installed: kernel-3.7.8-202.fc18.x86_64
> Mar 19 14:06:40 Updated: bash-4.2.45-1.fc18.x86_64
> 
> 
> 
> 
> [g.cecchi at f18ovn01 ~]$ rpm -qa | egrep "ovirt|vdsm|host-|libvirt|kvm"
> | sort
> libvirt-0.10.2.3-1.fc18.x86_64
> libvirt-client-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-config-network-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-config-nwfilter-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-interface-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-libxl-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-lxc-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-network-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-nodedev-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-nwfilter-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-qemu-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-secret-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-storage-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-uml-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-xen-0.10.2.3-1.fc18.x86_64
> libvirt-lock-sanlock-0.10.2.3-1.fc18.x86_64
> libvirt-python-0.10.2.3-1.fc18.x86_64
> qemu-kvm-1.2.2-6.fc18.x86_64
> qemu-kvm-tools-1.2.2-6.fc18.x86_64
> vdsm-4.10.3-10.fc18.x86_64
> vdsm-cli-4.10.3-10.fc18.noarch
> vdsm-python-4.10.3-10.fc18.x86_64
> vdsm-xmlrpc-4.10.3-10.fc18.noarch
> 
> 
> [g.cecchi at f18ovn03 ~]$ rpm -qa | egrep "ovirt|vdsm|host-|libvirt|kvm"
> | sort
> libvirt-0.10.2.3-1.fc18.x86_64
> libvirt-client-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-config-network-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-config-nwfilter-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-interface-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-libxl-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-lxc-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-network-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-nodedev-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-nwfilter-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-qemu-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-secret-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-storage-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-uml-0.10.2.3-1.fc18.x86_64
> libvirt-daemon-driver-xen-0.10.2.3-1.fc18.x86_64
> libvirt-lock-sanlock-0.10.2.3-1.fc18.x86_64
> libvirt-python-0.10.2.3-1.fc18.x86_64
> ovirt-host-deploy-1.0.1-1.fc18.noarch
> qemu-kvm-1.2.2-6.fc18.x86_64
> qemu-kvm-tools-1.2.2-6.fc18.x86_64
> vdsm-4.10.3-10.fc18.x86_64
> vdsm-cli-4.10.3-10.fc18.noarch
> vdsm-python-4.10.3-10.fc18.x86_64
> vdsm-xmlrpc-4.10.3-10.fc18.noarch
> 
> If it could be of any help, for a short time f18ovn03 has been an
> all-in-one server. Then I purged all ovirt repo installed packages
> and
> then I deployed it as a node from another engine....
> Possibly I forgot to remove the ovirt-host-deploy
> But f18ovn01 was born from scratch as a fedora 18 server and before
> enabling on it the ovirt repo I ran an "rpm -qa" on both and then :
> 
> yum install $(diff /tmp/f18ovn0*|grep -v ovirt |grep -v vdsm| grep
> "^>" |cut -d ">" -f2 )
> 
> to align the packages not relatd to ovirt itself
> then I deployed the node from webadmin gui
> 
> BTW: both nodes work ok and both has been SPM during update to 3.2.1
> and both sustained live migration of linux and windows vm in both
> directions....
> 
> Gianluca
> 



More information about the Users mailing list