[Users] How to add internal networks

"René Koch (ovido)" r.koch at ovido.at
Mon May 13 03:56:31 EDT 2013


Hi,

You have to define logical networks (in datacenter and assign to 
cluster) and configure these logical networks on your host (using hosts 
- network interfaces subtab).

When using multiple logical networks on 1 physical nic you will need 
most likely VLAN tagging, as all vm networks are configured as a bridge 
in oVirt.

See the following 2 links on how to tag your ovirtmgmt interface:
http://lists.ovirt.org/pipermail/users/2013-May/014286.html
http://lists.ovirt.org/pipermail/users/2013-May/014297.html

Hope this helps.


-- 
Best Regards

René Koch
Senior Solution Architect

============================================
ovido gmbh - "Das Linux Systemhaus"
Brünner Stra03 163, A-1210 Wien

Phone:   +43 720 / 530 670
Mobile:  +43 660 / 512 21 31
E-Mail:  r.koch at ovido.at
============================================


On 05/13/2013 08:36 AM, Frank Wall wrote:
> Hi,
>
> I'm using oVirt 3.2 on a single hosts with only one NIC. Currently
> there is only the ovirtmgmt network configured. But I need to add
> more networks, especially some internal networks like 192.168.x.y/24
> need to be usable for VMs.
>
>  From the oVirt Admin Portal this does not seem to be possible. It
> seems I cannot reuse the ovirtmgmt interface for any other network.
> Is this true? How am I supposed to add several networks in oVirt if
> I have just one NIC?
>
>
> Thanks
> - Frank
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


More information about the Users mailing list