[Users] oVirt 3.0 - VM shows paused status only

Sven Knohsalla s.knohsalla at netbiscuits.com
Wed May 8 09:01:23 UTC 2013


Hi Roy!

Update:
Ok, need to use param -s (SSL) to get proper output:
vdsClient -s 0 getAllVmStats | grep Paused


5a34c59f-a860-4e55-b1b0-2a96ce875a86
        Status = Paused
        kvmEnable = true
        network = {}
        acpiEnable = true
        monitorResponse = 0
        vmType = kvm
        pid = 0
        disks = {}
        displayIp = 172.16.101.103
        elapsedTime = 19426
        timeOffset = 889311
        displaySecurePort = -1
        boot = c
        displayPort = -1
        clientIp =
        displayType = qxl
        nice =

So the VM is shown on the destination hypervisor as paused ( exactly what I see in oVirt GUI :) )

Is there a possibility to use the ID to fake/change the current status?

Thanks,
Sven



-----Ursprüngliche Nachricht-----
Von: Roy Golan [mailto:rgolan at redhat.com] 
Gesendet: Mittwoch, 8. Mai 2013 10:51
An: Sven Knohsalla
Betreff: Re: AW: [Users] oVirt 3.0 - VM shows paused status only

vdsClient 0 getAllVmStats

On Wed 08 May 2013 11:45:30 AM IDT, Sven Knohsalla wrote:
> Hi Roy,
>
> I think there is a difference between shell commands oVirt 3.0 and > 3.1:
>
> Output:
>
> "
> [root at deovn-a03 ~]# vdsClient 0 list
> Traceback (most recent call last):
>    File "/usr/share/vdsm/vdsClient.py", line 1972, in <module>
>    File "/usr/share/vdsm/vdsClient.py", line 229, in do_list
>    File "/usr/lib64/python2.7/xmlrpclib.py", line 1224, in __call__
>    File "/usr/lib64/python2.7/xmlrpclib.py", line 1575, in __request
>    File "/usr/lib64/python2.7/xmlrpclib.py", line 1264, in request
>    File "/usr/lib64/python2.7/xmlrpclib.py", line 1294, in single_request
>    File "/usr/lib64/python2.7/httplib.py", line 1027, in getresponse
>    File "/usr/lib64/python2.7/httplib.py", line 407, in begin
>    File "/usr/lib64/python2.7/httplib.py", line 371, in _read_status
> BadStatusLine: '
>
>
> Unfortunately I'm not common with the command syntax, although the help for vdsClient shows the same command..
>
> Thanks for any further help here!
>
> Best, Sven.
>
> -----Ursprüngliche Nachricht-----
> Von: Roy Golan [mailto:rgolan at redhat.com]
> Gesendet: Mittwoch, 8. Mai 2013 10:29
> An: Sven Knohsalla
> Betreff: Re: [Users] oVirt 3.0 - VM shows paused status only
>
> On Wed 08 May 2013 10:14:03 AM IDT, Sven Knohsalla wrote:
>> Hi,
>>
>> thanks for the fast response.
>>
>> All three hosts are up, had to reboot the host which the VM should 
>> normally run,
>>
>> so the VM is marked to run on the 3^rd HV (WebGUI).
>>
>> virsh –r list just shows the actual running VMs on the marked 
>> hypervisor, but the paused VM is missing.
>>
>> Would it help to reboot the 3^rd HV to change the state of this VM?
>>
> whats the output of "vdsClient 0 list" on that HV?
>
>> How is it possible to force a VM status?
>>
>> Thanks in advance!
>>
>> Best, Sven.
>>
>> *Von:*Omer Frenkel [mailto:ofrenkel at redhat.com]
>> *Gesendet:* Mittwoch, 8. Mai 2013 08:26
>> *An:* Sven Knohsalla
>> *Cc:* users at ovirt.org
>> *Betreff:* Re: [Users] oVirt 3.0 - VM shows paused status only
>>
>> ---------------------------------------------------------------------
>> -
>> --
>>
>>      *From: *"Sven Knohsalla" <s.knohsalla at netbiscuits.com
>>      <mailto:s.knohsalla at netbiscuits.com>>
>>      *To: *users at ovirt.org <mailto:users at ovirt.org>
>>      *Sent: *Wednesday, May 8, 2013 8:24:12 AM
>>      *Subject: *[Users] oVirt 3.0 - VM shows paused status only
>>
>>      Hi,
>>
>>      it seems I didn’t give enough time for one VM to shutdown ( on
>>      2.3.0 HV) properly, so it ended up as “paused”.
>>
>>      Unfortunately I don’t have the option to unpause , the commands
>>      shutdown/power off/start are all failing.
>>
>>      Makes sense as the VM isn’t running on any hypervisor anymore,
>>
>>      so it must be a DB entry which has been set by the engine?
>>
>>      Is there a workaround/command to reset a paused VM on the
>>      engine/DB to set the status to powered off?
>>
>> well there is, but i would suggest to try the safer way first,
>>
>> what is the status of your hosts?
>>
>> what is reorted (in the ui) as the host this vm is running on?
>>
>>      Thanks in advance for your help!
>>
>>      Best,
>>
>>      Sven.
>>
>>      Sven Knohsalla |System Administration
>>
>>      Office +49 631 68036 433 | Fax +49 631 68036 111
>>      |E-Mails.knohsalla at netbiscuits.com
>>      <mailto:s.knohsalla at netbiscuits.com>| Skype: netbiscuits.admin
>>
>>      Netbiscuits GmbH | Europaallee 10 | 67657 | GERMANY
>>
>>      https://my.netbiscuits.com/image/image_gallery?uuid=3a1a9d19-c305-4032-8cef-00b03c3d4c79&groupId=10211&t=1361534926402
>>      <http://www.netbiscuits.com/>
>>
>>      https://my.netbiscuits.com/image/image_gallery?uuid=3031deca-7e56-4417-9822-3d6d72f71ef0&groupId=10211&t=1347280983812
>>      <https://www.netbiscuits.com/news>
>>      https://my.netbiscuits.com/image/image_gallery?uuid=1d1a5e29-ceda-4ab1-9353-67a1e838364d&groupId=10211&t=1347281040591
>>      <https://twitter.com/netbiscuits>
>>      https://my.netbiscuits.com/image/image_gallery?uuid=c99bf866-be25-4236-a0ee-dca68ec828a5&groupId=10211&t=1347280983848
>>      <http://www.linkedin.com/company/netbiscuits>
>>      https://my.netbiscuits.com/image/image_gallery?uuid=d62ba951-14dc-450d-b5f1-be33884225e3&groupId=10211&t=1347280983872
>>      <http://www.xing.com/companies/netbiscuitsgmbh>
>>      https://my.netbiscuits.com/image/image_gallery?uuid=7b28f500-f415-40bb-851f-0cd55beeaf45&groupId=10211&t=1347280983791
>>      <https://www.facebook.com/Netbiscuits>
>>      https://my.netbiscuits.com/image/image_gallery?uuid=cc8764d0-a5ac-4623-bb63-da3ca7c97f94&groupId=10211&t=1347280983836
>>      <https://plus.google.com/u/0/112410769451962733032>
>>      https://my.netbiscuits.com/image/image_gallery?uuid=a15e871c-a11b-419c-acca-da5a0ebd5856&groupId=10211&t=1347281040599
>>      <http://www.youtube.com/user/netbiscuits>
>>
>>      *Register Court:*Local Court Kaiserslautern | *Commercial Register
>>      ID:* HR B 3604
>>      *Management Board*: Guido Moggert, Michael Neidhöfer, Christian
>>      Reitz, Martin Süß
>>
>>      This message and any files transmitted with it are confidential
>>      and intended solely for the use of the individual or entity to
>>      whom they are addressed. It may also be privileged or otherwise
>>      protected by work product immunity or other legal rules. Please
>>      notify the sender immediately by e-mail if you have received this
>>      e-mail by mistake and delete this e-mail from your system. If you
>>      are not the intended recipient you are notified that disclosing,
>>      copying, distributing or taking any action in reliance on the
>>      contents of this information is strictly prohibited.
>>
>>      Warning: Although Netbiscuits has taken reasonable precautions to
>>      ensure no viruses are present in this email, the company cannot
>>      accept responsibility for any loss or damage arising from the use
>>      of this email or attachments.
>>
>>      Beschreibung: Beschreibung:
>>      http://www.netbiscuits.com/image/image_gallery?uuid=0ba7711a-a277-4ea0-acb0-17fe13c3089d&groupId=10211&t=1348560850164Please
>>      consider the environment before printing
>>
>>
>>      _______________________________________________
>>      Users mailing list
>>      Users at ovirt.org <mailto:Users at ovirt.org>
>>      http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
>




More information about the Users mailing list