[Users] Problems with first time oVirt installation

[Itamar Heim]

On 11/14/2013 11:01 PM, Lindsay Mathieson wrote:
> I ran that, large number of logs collected - any ones in particualr you
> want to see?
>
> the sos.log consists of this:
>
> 2013-11-15 13:49:51,373 INFO: could not run command: /usr/bin/systool -v
> -c -b scsi
> 2013-11-15 13:49:53,699 INFO: error copying file /sys/bus/scsi/uevent
> (IOError)
> 2013-11-15 13:49:53,701 INFO: error copying file
> /sys/bus/scsi/drivers/sr/uevent (IOError)
> 2013-11-15 13:49:53,701 INFO: error copying file
> /sys/bus/scsi/drivers/sr/unbind (IOError)
> 2013-11-15 13:49:53,702 INFO: error copying file
> /sys/bus/scsi/drivers/sr/bind (IOError)
> 2013-11-15 13:49:53,702 INFO: error copying file
> /sys/bus/scsi/drivers_probe (IOError)
> 2013-11-15 13:49:54,113 INFO: could not run command: /usr/bin/cpufreq-info
> 2013-11-15 13:49:55,203 INFO: could not run command: /usr/bin/systool -c
> fc_host -v
> 2013-11-15 13:49:55,203 INFO: could not run command: /usr/bin/systool -c
> scsi_host -v
> 2013-11-15 13:49:55,215 INFO: error copying file
> /sys/module/ipmi_si/parameters/hotmod (IOError)
> 2013-11-15 13:49:55,232 INFO: error copying file
> /sys/module/md_mod/parameters/new_array (IOError)
> 2013-11-15 13:49:55,239 INFO: error copying file
> /sys/module/libfcoe/parameters/disable (IOError)
> 2013-11-15 13:49:55,239 INFO: error copying file
> /sys/module/libfcoe/parameters/enable (IOError)
> 2013-11-15 13:49:55,240 INFO: error copying file
> /sys/module/libfcoe/parameters/destroy (IOError)
> 2013-11-15 13:49:55,240 INFO: error copying file
> /sys/module/libfcoe/parameters/create_vn2vn (IOError)
> 2013-11-15 13:49:55,240 INFO: error copying file
> /sys/module/libfcoe/parameters/create (IOError)
> 2013-11-15 13:49:55,241 INFO: error copying file
> /sys/module/fcoe/parameters/disable (IOError)
> 2013-11-15 13:49:55,241 INFO: error copying file
> /sys/module/fcoe/parameters/enable (IOError)
> 2013-11-15 13:49:55,241 INFO: error copying file
> /sys/module/fcoe/parameters/destroy (IOError)
> 2013-11-15 13:49:55,241 INFO: error copying file
> /sys/module/fcoe/parameters/create (IOError)
> 2013-11-15 13:49:56,085 INFO: could not run command: /usr/sbin/dkms status
>
>
> NB:This was run in a XenServer VM so Host virtulisation and the
> all-in-one plugine weren't possible.
>
>
> On 15 November 2013 10:40, Itamar Heim <iheim at redhat.com
> <mailto:iheim at redhat.com>> wrote:
>
>     On 11/14/2013 07:17 PM, Lindsay Mathieson wrote:
>
>         On 15 November 2013 09:44, Itamar Heim <iheim at redhat.com
>         <mailto:iheim at redhat.com>
>         <mailto:iheim at redhat.com <mailto:iheim at redhat.com>>> wrote:
>
>              On 11/14/2013 03:51 PM, Lindsay Mathieson wrote:
>
>                  Hi all - trying to evaluate ovirt and having real
>         problems with
>                  getting a self
>                  contained install running.
>
>                  I've followed the Quickstart guide at:
>
>              any errors in the setup logs? in engine logs?
>
>
>
>         Could you point me to the log locations?
>
>         thanks
>
>         --
>         Lindsay
>
>
>     i don't remember them of the top of my head, but you can run the
>     engine-log-collector and it will collec them for you.
>     sandro - any wiki on troubleshooting/log locations?
>
>
>
>
> --
> Lindsay

oh, was nested virt enabled? this is an all in one deployment, right? it 
needs VT extensions to work.
you pasted the errors of the sos.log, not the content of the zip