[Users] Host installation failed ovirt 3.2

Sven Kieske S.Kieske at mittwald.de
Fri Oct 18 08:44:57 UTC 2013


Hi,

this config was already in /etc/sysconfig/iptables (you forget some
empty lines, but the rest is identical), here is the outcome:

 service iptables stop
iptables: Flushing firewall rules:                         [  OK  ]
iptables: Setting chains to policy ACCEPT: nat filter mangl[  OK  ]
iptables: Unloading modules:                               [  OK  ]
[root at vroot4 ~]# service iptables start
iptables: Applying firewall rules:                         [  OK  ]
[root at vroot4 ~]# service iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num  target     prot opt source               destination
1    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state
RELATED,ESTABLISHED
2    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
3    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:54321
4    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:22
5    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp
dpt:161
6    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:16514
7    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0
multiport dports 5634:6166
8    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0
multiport dports 49152:49216
9    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:24007
10   ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp
dpt:111
11   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:38465
12   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:38466
13   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:38467
14   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:39543
15   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:55863
16   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:38468
17   ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp
dpt:963
18   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:965
19   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:4379
20   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:139
21   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpt:445
22   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
dpts:24009:24108
23   REJECT     all  --  0.0.0.0/0            0.0.0.0/0
reject-with icmp-host-prohibited

Chain FORWARD (policy ACCEPT)
num  target     prot opt source               destination
1    REJECT     all  --  0.0.0.0/0            0.0.0.0/0
PHYSDEV match ! --physdev-is-bridged reject-with icmp-host-prohibited

Chain OUTPUT (policy ACCEPT)
num  target     prot opt source               destination


So there is no error, reloading it by hand.

I tried to then add the host again via webadmin, and it succeeds.

So I really don't know what the problem was :(


On 17.10.2013 17:52, Alon Bar-Lev wrote:
> 
> 
> ----- Original Message -----
>>
>> On 17.10.2013 16:15, Alon Bar-Lev wrote:
>>> Please send the entire host-deploy log so I can see what iptables rules are
>>> there.
>>>
>>


More information about the Users mailing list