[Users] Host installation failed ovirt 3.2

Sven Kieske S.Kieske at mittwald.de
Fri Oct 18 14:43:39 UTC 2013


This problem occured again, this time, deploying an centOS netinstall.

Steps to reproduce:

1. install CentOS 6.4. x64 netinstall, use the target "minimal
installation".
2. add repos for epel and ovirt.
3. install vdsm on host through webadmin

actual result:

In Webadmin:

"Failed to install Host server4 Failed to execute stage 'Closing up':
Command '/sbin/service' failed to execute."

I attached the complete host-deploy log. it fails at reloading iptables
however, the default ovirt-iptables config is present in
/etc/sysconfig/iptables and is loaded (this was checked by
 "service iptables status" command)
also manual restarting the service works fine:

service iptables restart
iptables: Flushing firewall rules:                         [  OK  ]
iptables: Setting chains to policy ACCEPT: mangle filter na[  OK  ]
iptables: Unloading modules:                               [  OK  ]
iptables: Applying firewall rules:                         [  OK  ]

next step was "reinstall" host through webadmin, which worked fine,
the host rebooted.

any hints?


On 18.10.2013 10:44, Sven Kieske wrote:
> Hi,
> 
> this config was already in /etc/sysconfig/iptables (you forget some
> empty lines, but the rest is identical), here is the outcome:
> 
>  service iptables stop
> iptables: Flushing firewall rules:                         [  OK  ]
> iptables: Setting chains to policy ACCEPT: nat filter mangl[  OK  ]
> iptables: Unloading modules:                               [  OK  ]
> [root at vroot4 ~]# service iptables start
> iptables: Applying firewall rules:                         [  OK  ]
> [root at vroot4 ~]# service iptables status
> Table: filter
> Chain INPUT (policy ACCEPT)
> num  target     prot opt source               destination
> 1    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state
> RELATED,ESTABLISHED
> 2    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
> 3    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:54321
> 4    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:22
> 5    ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp
> dpt:161
> 6    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:16514
> 7    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0
> multiport dports 5634:6166
> 8    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0
> multiport dports 49152:49216
> 9    ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:24007
> 10   ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp
> dpt:111
> 11   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:38465
> 12   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:38466
> 13   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:38467
> 14   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:39543
> 15   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:55863
> 16   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:38468
> 17   ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp
> dpt:963
> 18   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:965
> 19   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:4379
> 20   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:139
> 21   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpt:445
> 22   ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp
> dpts:24009:24108
> 23   REJECT     all  --  0.0.0.0/0            0.0.0.0/0
> reject-with icmp-host-prohibited
> 
> Chain FORWARD (policy ACCEPT)
> num  target     prot opt source               destination
> 1    REJECT     all  --  0.0.0.0/0            0.0.0.0/0
> PHYSDEV match ! --physdev-is-bridged reject-with icmp-host-prohibited
> 
> Chain OUTPUT (policy ACCEPT)
> num  target     prot opt source               destination
> 
> 
> So there is no error, reloading it by hand.
> 
> I tried to then add the host again via webadmin, and it succeeds.
> 
> So I really don't know what the problem was :(
> 
> 
> On 17.10.2013 17:52, Alon Bar-Lev wrote:
>>
>>
>> ----- Original Message -----
>>>
>>> On 17.10.2013 16:15, Alon Bar-Lev wrote:
>>>> Please send the entire host-deploy log so I can see what iptables rules are
>>>> there.
>>>>
>>>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
> 
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ovirt-20131018162911-server4.log
Type: text/x-log
Size: 411953 bytes
Desc: ovirt-20131018162911-server4.log
URL: <http://lists.ovirt.org/pipermail/users/attachments/20131018/1aadebe0/attachment-0001.bin>


More information about the Users mailing list