[Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?

[Alon Bar-Lev]

----- Original Message -----
> From: "Gianluca Cecchi" <gianluca.cecchi at gmail.com>
> To: "Alon Bar-Lev" <alonbl at redhat.com>
> Cc: "users" <users at ovirt.org>
> Sent: Sunday, April 6, 2014 12:45:51 AM
> Subject: Re: [Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
> 
> On Sat, Apr 5, 2014 at 10:43 PM, Alon Bar-Lev <alonbl at redhat.com> wrote:
> 
> >>
> >> If I try to run engine-setup again I get
> >>
> >> [root at tekkaman ~]# engine-setup
> >> [ INFO  ] Stage: Initializing
> >> [ INFO  ] Stage: Environment setup
> >>           Configuration files:
> >> ['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf',
> >> '/etc/ovirt-engine-setup.conf.d/10-packaging.conf',
> >> '/etc/ovirt-engine-setup.conf.d/20-setup-aio.conf',
> >> '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
> >>           Log file:
> >> /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log
> >>           Version: otopi-1.2.0 (otopi-1.2.0-1.fc19)
> >> [ ERROR ] Failed to execute stage 'Environment setup': initial_value
> >> must be unicode or None, not str
> >> [ INFO  ] Stage: Clean up
> >>           Log file is located at
> >> /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log
> >> [ INFO  ] Stage: Pre-termination
> >> [ INFO  ] Stage: Termination
> >> [ ERROR ] Execution of setup failed
> >
> > Please attach setup log, need to see where it comes from.
> 
> here it is:
> https://drive.google.com/file/d/0BwoPbcrMv8mvMnRMSm5oTF9NRUU/edit?usp=sharing

This was solved in[1], be available in next z-stream.

You can manually modify it, one letter... :)

[1] http://gerrit.ovirt.org/#/c/26118/

> 
> 
> >
> >>
> >>  If I patch as in
> >> http://gerrit.ovirt.org/#/c/26005/
> >
> > You should not patch unless we find an issue, but this error is strange, as
> > patch does contains this variable[1]
> >
> > [1]
> > http://gerrit.ovirt.org/#/c/26005/4/packaging/setup/ovirt_engine_setup/reportsconstants.py,cm
> >
> >>
> >> I get
> >> # engine-setup
> >> [ INFO  ] Stage: Initializing
> >> [ ERROR ] Failed to execute stage 'Initializing': type object
> >> 'ConfigEnv' has no attribute 'LEGACY_REPORTS_WAR'
> >> [ INFO  ] Stage: Clean up
> >>           Log file is located at
> >> /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405190842.log
> >> [ INFO  ] Stage: Pre-termination
> >> [ INFO  ] Stage: Termination
> >> [ ERROR ] Execution of setup failed
> >>
> >> any hint?
> >
> > Thanks!
> 
> I tried that patch because actually I also found this thread some days
> ago with the same error and it was suggested to do so...
> http://lists.ovirt.org/pipermail/users/2014-April/023083.html
> 
> the setup log about the run after patching is here:
> https://drive.google.com/file/d/0BwoPbcrMv8mvWEc5UVV4a1BuNlk/edit?usp=sharing
> 
> Gianluca
>