[Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?

Gianluca Cecchi gianluca.cecchi at gmail.com
Sat Apr 5 23:50:24 UTC 2014


On Sun, Apr 6, 2014 at 1:25 AM, Alon Bar-Lev <alonbl at redhat.com> wrote:

>
> """
> Target "gen-config-ce" does not exist in the project "buildomatic".
> """
>
> Hmm... it should have been gen-config without the -ce.
>
> The tags of ovirt-engine-dwh/ovirt-engine-reports are incorrect or correct but the release misses fixes as far as I can see, so I do not know what exactly do you have... But I think this[1] is the fix.
>
> [1] http://gerrit.ovirt.org/#/c/25998/

My packages should be the official ones at the moment:

rpm -q ovirt-engine-dwh ovirt-engine-reports ovirt-engine-dwh-setup
ovirt-engine-reports-setup
ovirt-engine-dwh-3.4.0-2.fc19.noarch
ovirt-engine-reports-3.4.0-2.fc19.noarch
ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch
ovirt-engine-reports-setup-3.4.0-2.fc19.noarch

hum...
tried also approach of reinstall, as I saw that some .pyc files
resulted modified after my first tried patch when I edited
reportsconstants.py and deploy.py
don't know if expected that also .pyc files are modified after
changing .py files but I had now:

# rpm -qV ovirt-engine-dwh ovirt-engine-reports ovirt-engine-dwh-setup
ovirt-engine-reports-setup
S.5....T.    /usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-dwh/legacy/config.py
--> the only one I expected
S.5....T.    /usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-dwh/legacy/config.pyc
.......T.    /usr/share/ovirt-engine/setup/ovirt_engine_setup/reportsconstants.pyc
S.5....T.    /usr/share/ovirt-engine/setup/plugins/ovirt-engine-setup/ovirt-engine-reports/jasper/deploy.pyc

So
# yum reinstall ovirt-engine-dwh ovirt-engine-reports
ovirt-engine-dwh-setup ovirt-engine-reports-setup

Reinstalling:
 ovirt-engine-dwh                              noarch
  3.4.0-2.fc19                    ovirt-stable                    1.2
M
 ovirt-engine-dwh-setup                        noarch
  3.4.0-2.fc19                    ovirt-stable                     48
k
 ovirt-engine-reports                          noarch
  3.4.0-2.fc19                    ovirt-stable                    1.0
M
 ovirt-engine-reports-setup                    noarch
  3.4.0-2.fc19                    ovirt-stable                     49
k

[root at tekkaman ~]# rpm -qV ovirt-engine-dwh ovirt-engine-reports
ovirt-engine-dwh-setup ovirt-engine-reports-setup
[root at tekkaman ~]#

then applied
http://gerrit.ovirt.org/#/c/26118/
for config.py

But now I see that if I run engine-setup again it tries a fresh
install and doesn't recognize it is an already configured anvironment
(I pressed Ctrl-C at RDBMS question to avoid further problems...)

[root at tekkaman ~]# engine-setup
[ INFO  ] Stage: Initializing
[ INFO  ] Stage: Environment setup
          Configuration files:
['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf',
'/etc/ovirt-engine-setup.conf.d/10-packaging.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-aio.conf',
'/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
          Log file:
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406013743.log
          Version: otopi-1.2.0 (otopi-1.2.0-1.fc19)
[ INFO  ] Stage: Environment packages setup
[ INFO  ] Stage: Programs detection
[ INFO  ] Stage: Environment setup
[ INFO  ] Stage: Environment customization

          --== PRODUCT OPTIONS ==--

          Configure Reports on this host (Yes, No) [Yes]:

          --== PACKAGES ==--

[ INFO  ] Checking for product updates...
[ INFO  ] No product updates found

          --== NETWORK CONFIGURATION ==--

[WARNING] Failed to resolve tekkaman.localdomain.local using DNS, it
can be resolved only locally
          Setup can automatically configure the firewall on this system.
          Note: automatic configuration of the firewall may overwrite
current settings.
          Do you want Setup to configure the firewall? (Yes, No) [Yes]:
[ INFO  ] iptables will be configured as firewall manager.

          --== DATABASE CONFIGURATION ==--

          Where is the Reports database located? (Local, Remote)
[Local]: ^C[ ERROR ] Failed to execute stage 'Environment
customization': SIG2
[ INFO  ] Stage: Clean up
          Log file is located at
/var/log/ovirt-engine/setup/ovirt-engine-setup-20140406013743.log
[ INFO  ] Stage: Pre-termination
[ INFO  ] Stage: Termination
[ ERROR ] Execution of setup failed

setup log here:
https://drive.google.com/file/d/0BwoPbcrMv8mvQnd4WGxuOENzZTg/edit?usp=sharing


Now it is time to go to sleep to be sure not to do worse... ;-)
But if you have any hint about this problem tomorrow (today actually.. ;-)
I can dig more.

Thanks again
Gianluca



More information about the Users mailing list