[ovirt-users] Proper way to change and persist vdsm configuration options
Trey Dockendorf
treydock at gmail.com
Tue Aug 5 15:45:12 EDT 2014
Excellent, so installing 'ovirt-host-deploy' on each node then
configuring the /etc/ovirt-host-deploy.conf.d files seems very
automate-able, will see how it works in practice.
Regarding the actual host registration and getting the host added to
ovirt-engine, are there other methods besides the API and the sdk?
Would it be possible to configure the necessary
ovirt-host-deploy.conf.d files then execute "ovirt-host-deploy"? I
notice that running 'ovirt-host-deploy' wants to make whatever host
executes it a ovir hypervisor but haven't yet run it all the way
through as no server to test with at this time. There seems to be no
"--help" or similar command line argument.
I'm sure this will all be more clear once I attempt the steps and run
through the motions. Will try to find a system to test on so I'm
ready once our new servers arrive.
Thanks,
- Trey
On Tue, Aug 5, 2014 at 2:23 PM, Alon Bar-Lev <alonbl at redhat.com> wrote:
>
>
> ----- Original Message -----
>> From: "Trey Dockendorf" <treydock at gmail.com>
>> To: "Alon Bar-Lev" <alonbl at redhat.com>
>> Cc: "ybronhei" <ybronhei at redhat.com>, "users" <users at ovirt.org>, "Fabian Deutsch" <fabiand at redhat.com>, "Dan
>> Kenigsberg" <danken at redhat.com>, "Itamar Heim" <iheim at redhat.com>, "Douglas Landgraf" <dougsland at redhat.com>
>> Sent: Tuesday, August 5, 2014 10:01:14 PM
>> Subject: Re: [ovirt-users] Proper way to change and persist vdsm configuration options
>>
>> Ah, thank you for the input! Just so I'm not spending time
>> implementing the wrong changes, let me confirm I understand your
>> comments.
>>
>> 1) Deploy host with Foreman
>> 2) Apply Puppet catalog including ovirt Puppet module
>> 3) Initiate host-deploy via rest API
>>
>> In the ovirt module the following takes place:
>>
>> 2a) Add yum repos
>> 2b) Manage /etc/ovirt-host-deploy.conf.d/40-xxx.conf
>>
>
> you can have any # of files with any prefix :))
>
>> For #2b I have a few questions
>>
>> * The name of the ".conf" file is simply for sorting and
>> labeling/organization, it has not functional impact on what those
>> overrides apply to?
>
> right.
>
>> * That file is managed on the ovirt-engine server, not the actual nodes?
>
> currently on the host, in future we will provide a method to add this to engine database[1]
>
> [1] http://gerrit.ovirt.org/#/c/27064/
>
>> * Is there any way to apply overrides to specific hosts? For example
>> if I have some hosts that require a config and others that don't, how
>> would I separate those *.conf files? This is more theoretical as
>> right now my setup is common across all nodes.
>
> the poppet module can put whatever required on each host.
>
>> For #3...the implementation of API calls from within Puppet is a
>> challenge and one I can't tackle yet, but definitely will make it a
>> goal for the future. In the mean time, what's the "manual" way to
>> initiate host-deploy? Is there a CLI command that would have the same
>> result as an API call or is the recommended way to perform the API
>> call manually (ie curl)?
>
> well, you can register host using the following protocol[1], but it is difficult to do this securely, what you actually need is to establish ssh trust for root with engine key then register.
>
> you can also use the register command using curl by something like (I have not checked):
> https://admin%40internal:password@engine/ovirt-engine/api/hosts
> ---
> <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
> <host>
> <name>host1</name>
> <address>dns</address>
> <ssh>
> <authentication_method>publickey</authentication_method>
> </ssh>
> <cluster id="cluster-uuid"/>
> </host>
> ---
>
> you can also use the ovirt-engine-sdk-python package:
> ---
> import ovirtsdk.api
> import ovirtsdk.xml
>
> sdk = ovirtsdk.api.API(
> url='https://host/ovirt-engine/api',
> username='admin at internal',
> password='password',
> insecure=True,
> )
> sdk.hosts.add(
> ovirtsdk.xml.params.Host(
> name='host1',
> address='host1',
> cluster=engine_api.clusters.get(
> 'cluster'
> ),
> ssh=self._ovirtsdk_xml.params.SSH(
> authentication_method='publickey',
> ),
> )
> )
> ---
>
> [1] http://www.ovirt.org/Features/HostDeployProtocol
>
>>
>> Thanks!
>> - Trey
>>
>> On Tue, Aug 5, 2014 at 1:45 PM, Alon Bar-Lev <alonbl at redhat.com> wrote:
>> >
>> >
>> > ----- Original Message -----
>> >> From: "Trey Dockendorf" <treydock at gmail.com>
>> >> To: "ybronhei" <ybronhei at redhat.com>
>> >> Cc: "users" <users at ovirt.org>, "Fabian Deutsch" <fabiand at redhat.com>, "Dan
>> >> Kenigsberg" <danken at redhat.com>, "Itamar
>> >> Heim" <iheim at redhat.com>, "Douglas Landgraf" <dougsland at redhat.com>, "Alon
>> >> Bar-Lev" <alonbl at redhat.com>
>> >> Sent: Tuesday, August 5, 2014 9:36:24 PM
>> >> Subject: Re: [ovirt-users] Proper way to change and persist vdsm
>> >> configuration options
>> >>
>> >> On Tue, Aug 5, 2014 at 12:32 PM, ybronhei <ybronhei at redhat.com> wrote:
>> >> > Hey,
>> >> >
>> >> > Just noticed something that I forgot about..
>> >> > before filing new BZ, see in ovirt-host-deploy README.environment [1]
>> >> > the
>> >> > section:
>> >> > VDSM/configOverride(bool) [True]
>> >> > Override vdsm configuration file.
>> >> >
>> >> > changing it to false will keep your vdsm.conf file as is after deploying
>> >> > the
>> >> > host again (what happens after node upgrade)
>> >> >
>> >> > [1]
>> >> > https://github.com/oVirt/ovirt-host-deploy/blob/master/README.environment
>> >> >
>> >> > please check if that what you meant..
>> >> >
>> >> > Thanks,
>> >> > Yaniv Bronhaim.
>> >> >
>> >>
>> >> I was unaware of that package. I will check that out as that seems to
>> >> be what I am looking for.
>> >>
>> >> I have not filed this in BZ and will hold off pending
>> >> ovirt-host-deploy. If you feel a BZ is still necessary then please do
>> >> file one and I would be happy to provide input if it would help.
>> >>
>> >> Right now this is my workflow.
>> >>
>> >> 1. Foreman provisions bare-metal server with CentOS 6.5
>> >> 2. Once provisioned and system rebooted Puppet applies puppet-ovirt
>> >> [1] module that adds the necessary yum repos
>> >
>> > and should stop here..
>> >
>> >> , and installs packages.
>> >> Part of my Puppet deployment is basic things like sudo management
>> >> (vdsm's sudo is account for), sssd configuration, and other aspects
>> >> that are needed by every system in my infrastructure. Part of the
>> >> ovirt::node Puppet class is managing vdsm.conf, and in my case that
>> >> means ensuring iSER is enabled for iSCSI over IB.
>> >
>> > you can create a file /etc/ovirt-host-deploy.conf.d/40-xxx.conf
>> > ---
>> > VDSM_CONFIG/section/key=str:content
>> > ---
>> >
>> > this will create a proper vdsm.conf when host-deploy is initiated.
>> >
>> > you should now use the rest api to initiate host-deploy.
>> >
>> >> 3. Once host is online and has had the full Puppet catalog applied I
>> >> log into ovirt-engine web interface and add those host (pulling it's
>> >> data via the Foreman provider).
>> >
>> > right, but you should let this process install packages and manage
>> > configuration.
>> >
>> >> What I've noticed is that after step #3, after a host is added by
>> >> ovirt-engine, the vdsm.conf file is reset to default and I have to
>> >> reapply Puppet before it can be used as the one of my Data Storage
>> >> Domains requires iSER (not available over TCP).
>> >
>> > right, see above.
>> >
>> >> What would be the workflow using ovirt-host-deploy? Thus far I've had
>> >> to piece together my workflow based on the documentation and filling
>> >> in blanks where possible since I do require customizations to
>> >> vdsm.conf and the documented workflow of adding a host via web UI does
>> >> not allow for such customization.
>> >>
>> >> Thanks,
>> >> - Trey
>> >>
>> >> [1] - https://github.com/treydock/puppet-ovirt (README not fully
>> >> updated as still working out how to use Puppet with oVirt)
>> >>
>> >> >
>> >> > On 08/05/2014 08:12 AM, Trey Dockendorf wrote:
>> >> >>
>> >> >> I'll file BZ. As far as I can recall this has been an issue since
>> >> >> 3.3.x
>> >> >> as
>> >> >> I have been using Puppet to modify values and have had to rerun Puppet
>> >> >> after installing a node via GUI and when performing update from GUI.
>> >> >> Given
>> >> >> that it has occurred when VDSM version didn't change on the node it
>> >> >> seems
>> >> >> likely to be something being done by Python code that bootstraps a node
>> >> >> and
>> >> >> performs the other tasks. I won't have any systems available to test
>> >> >> with
>> >> >> for a few days. New hardware specifically for our oVirt deployment is
>> >> >> on
>> >> >> order so should be able to more thoroughly debug and capture logs at
>> >> >> that
>> >> >> time.
>> >> >>
>> >> >> Would using vdsm-reg be a better solution for adding new nodes? I only
>> >> >> tried using vdsm-reg once and it went very poorly...lots of missing
>> >> >> dependencies not pulled in from yum install I had to install manually
>> >> >> via
>> >> >> yum. Then the node was auto added to newest cluster with no ability to
>> >> >> change the cluster. Be happy to debug that too if there's some docs
>> >> >> that
>> >> >> outline the expected behavior.
>> >> >>
>> >> >> Using vdsm-reg or something similar seems like a better fit for puppet
>> >> >> deployed nodes, as opposed to requiring GUI steps to add the node.
>> >> >>
>> >> >> Thanks
>> >> >> - Trey
>> >> >> On Aug 4, 2014 5:53 AM, "ybronhei" <ybronhei at redhat.com> wrote:
>> >> >>
>> >> >>> On 07/31/2014 01:28 AM, Trey Dockendorf wrote:
>> >> >>>
>> >> >>>> I'm running ovirt nodes that are stock CentOS 6.5 systems with VDSM
>> >> >>>> installed. I am using iSER to do iSCSI over RDMA and to make that
>> >> >>>> work I have to modify /etc/vdsm/vdsm.conf to include the following:
>> >> >>>>
>> >> >>>> [irs]
>> >> >>>> iscsi_default_ifaces = iser,default
>> >> >>>>
>> >> >>>> I've noticed that any time I upgrade a node from the engine web
>> >> >>>> interface that changes to vdsm.conf are wiped out. I don't know if
>> >> >>>> this is being done by the configuration code or by the vdsm package.
>> >> >>>> Is there a more reliable way to ensure changes to vdsm.conf are NOT
>> >> >>>> removed automatically?
>> >> >>>>
>> >> >>>
>> >> >>> Hey,
>> >> >>>
>> >> >>> vdsm.conf shouldn't wiped out and shouldn't changed at all during
>> >> >>> upgrade.
>> >> >>> other related conf files (such as libvirtd.conf) might be overrided to
>> >> >>> keep
>> >> >>> defaults configurations for vdsm. but vdsm.conf should persist with
>> >> >>> user's
>> >> >>> modification. from my check, regular yum upgrade doesn't touch
>> >> >>> vdsm.conf
>> >> >>>
>> >> >>> Douglas can you verify that with node upgrade? might be specific to
>> >> >>> that
>> >> >>> flow..
>> >> >>>
>> >> >>> Trey, can file a bugzilla on that and describe your steps there?
>> >> >>>
>> >> >>> Thanks
>> >> >>>
>> >> >>> Yaniv Bronhaim,
>> >> >>>
>> >> >>>>
>> >> >>>> Thanks,
>> >> >>>> - Trey
>> >> >>>> _______________________________________________
>> >> >>>> Users mailing list
>> >> >>>> Users at ovirt.org
>> >> >>>> http://lists.ovirt.org/mailman/listinfo/users
>> >> >>>>
>> >> >>>>
>> >> >>>
>> >> >>> --
>> >> >>> Yaniv Bronhaim.
>> >> >>>
>> >> >>
>> >> >
>> >>
>>
More information about the Users
mailing list