[ovirt-users] Network Question

[Sahina Bose]

On 08/04/2014 09:06 AM, Punit Dambiwal wrote:
> Hi Sahina,
>
> But when i try to add the gluster Hosts from Ovirt....it doesn't 
> display the FQDN to add the bricks...it display the ip address 
> only...i will try to use the work around....

When you add the gluster host to oVirt, you should have provided the 
FQDN in the host address field. It uses this to display the list of 
hosts from which you can add the bricks


>
> Another question is what will be the drawbacks if i use ovirtmgmt and 
> storage on the same network (i will use 10GB network here with bonding) ??
>
>
> On Fri, Aug 1, 2014 at 6:14 PM, Sahina Bose <sabose at redhat.com 
> <mailto:sabose at redhat.com>> wrote:
>
>
>     On 08/01/2014 02:51 PM, Dan Kenigsberg wrote:
>
>         On Fri, Aug 01, 2014 at 09:43:07AM +0800, Punit Dambiwal wrote:
>
>             Hi All,
>
>             Is there any update on this ??
>
>
>             On Thu, Jul 31, 2014 at 9:08 AM, Punit Dambiwal
>             <hypunit at gmail.com <mailto:hypunit at gmail.com>> wrote:
>
>                 Hi Antoni,
>
>                 But all the bricks and gluster in the another
>                 subnet...I am using the
>                 Compute and gluster storage combined on the same host....
>
>                 Ovirtmgmt :- 43.25.76.0/24 <http://43.25.76.0/24>
>                 Gluster Storage :- 10.10.10.0/24 <http://10.10.10.0/24>
>
>         Did you try to follow Sahina's advice?
>
>         qemu-to-gluster communication goes on top the IP that you mount.
>         However, without hacks, inter-gluster communication uses FQDN
>         of hosts,
>         which most commonly resolves to the management network.
>
>
>
>     From the output of your "gluster volume info" , it looks like you
>     have used IP address (43.25...) to peer probe the hosts? If you
>     add the host from oVirt, for gluster to be able to use separate
>     network for glusterd-glusterd communication, you will need to use
>     FQDN while adding the host, and workaround as mentioned in
>     http://lists.ovirt.org/pipermail/users/2014-February/020894.html
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140805/853af1ba/attachment-0001.html>