[ovirt-users] method "glusterVolumesList" is not supported (Failed with error VDS_NETWORK_ERROR and code 5022)

Sahina Bose sabose at redhat.com
Tue Aug 12 15:09:19 UTC 2014


On 08/12/2014 08:10 PM, Jorick Astrego wrote:
>
> On 08/12/2014 03:44 PM, Sahina Bose wrote:
>> Could you provide the vdsm and supervdsm log from the node?
>>
> vdsm:
> http://pastebin.com/edZrvnkr
> (cut some repetitive loglines out to fit on pastebin)
>
> Supervdsm:
>
> http://pastebin.com/V8xTTMKk


I don't see any errors here corresponding to the unsupported method 
"glusterVolumesList"

Are these logs from the node "node3.test.nu"?

However, this error is unrelated to adding the storage domain. 
Typically, this unsupported method error is returned from vdsm when 
vdsm-gluster is not installed on the node.
You could try running the following on node3.test.nu
#vdsClient -s localhost glusterVolumesList

>> On 08/12/2014 07:08 PM, Jorick Astrego wrote:
>>> Hi,
>>>
>>> No restarting glusterfsd doesn't help. The steps in the link you 
>>> gave me don't help either. The node is clean installed and has never 
>>> been a part of a glusterfs.... Running gluster version 3.5.2
>>>
>>>     glusterfs-server-3.5.2-1.el7.x86_64
>>>     glusterfs-api-3.5.2-1.el7.x86_64
>>>     glusterfs-fuse-3.5.2-1.el7.x86_64
>>>     glusterfs-cli-3.5.2-1.el7.x86_64
>>>     vdsm-gluster-4.16.1-4.gitb2bf270.el7.noarch
>>>     glusterfs-libs-3.5.2-1.el7.x86_64
>>>     glusterfs-3.5.2-1.el7.x86_64
>>>     glusterfs-rdma-3.5.2-1.el7.x86_64
>>>
>>> From the log:
>>>
>>>     [2014-08-12 11:57:30.006092] W
>>>     [glusterfsd.c:1095:cleanup_and_exit]
>>>     (-->/lib64/libc.so.6(clone+0x6d) [0x7fac29bc23dd]
>>>     (-->/lib64/libpthread.so.0(+0x7df3) [0x7fac2a279df3]
>>>     (-->/usr/sbin/glusterd(glusterfs_sigwaiter+0xe5)
>>>     [0x7fac2b8471b5]))) 0-: received signum (15), shutting down
>>>     [2014-08-12 11:57:30.014919] I [glusterfsd.c:1959:main]
>>>     0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version
>>>     3.5.2 (/usr/sbin/glusterd -p /run/glusterd.pid)
>>>     [2014-08-12 11:57:30.018089] I [glusterd.c:1122:init]
>>>     0-management: Using /var/lib/glusterd as working directory
>>>     [2014-08-12 11:57:30.020315] I [socket.c:3561:socket_init]
>>>     0-socket.management: SSL support is NOT enabled
>>>     [2014-08-12 11:57:30.020331] I [socket.c:3576:socket_init]
>>>     0-socket.management: using system polling thread
>>>     [2014-08-12 11:57:30.021533] W
>>>     [rdma.c:4194:__gf_rdma_ctx_create] 0-rpc-transport/rdma: rdma_cm
>>>     event channel creation failed (No such device)
>>>     [2014-08-12 11:57:30.021548] E [rdma.c:4482:init]
>>>     0-rdma.management: Failed to initialize IB Device
>>>     [2014-08-12 11:57:30.021555] E
>>>     [rpc-transport.c:333:rpc_transport_load] 0-rpc-transport: 'rdma'
>>>     initialization failed
>>>     [2014-08-12 11:57:30.021610] W
>>>     [rpcsvc.c:1535:rpcsvc_transport_create] 0-rpc-service: cannot
>>>     create listener, initing the transport failed
>>>     [2014-08-12 11:57:30.021669] I [socket.c:3561:socket_init]
>>>     0-socket.management: SSL support is NOT enabled
>>>     [2014-08-12 11:57:30.021679] I [socket.c:3576:socket_init]
>>>     0-socket.management: using system polling thread
>>>     [2014-08-12 11:57:30.022603] I
>>>     [glusterd.c:367:glusterd_check_gsync_present] 0-glusterd:
>>>     geo-replication module not installed in the system
>>>     *[2014-08-12 11:57:30.023046] E
>>>     [store.c:408:gf_store_handle_retrieve] 0-: Path corresponding to
>>>     /var/lib/glusterd/glusterd.info, returned error: (No such file
>>>     or directory)**
>>>     **[2014-08-12 11:57:30.023075] E
>>>     [store.c:408:gf_store_handle_retrieve] 0-: Path corresponding to
>>>     /var/lib/glusterd/glusterd.info, returned error: (No such file
>>>     or directory)*
>>>     [2014-08-12 11:57:30.023090] I
>>>     [glusterd-store.c:1441:glusterd_restore_op_version]
>>>     0-management: Detected new install. Setting op-version to
>>>     maximum : 30501
>>>     Final graph:
>>>     +------------------------------------------------------------------------------+
>>>       1: volume management
>>>       2:     type mgmt/glusterd
>>>       3:     option rpc-auth.auth-glusterfs on
>>>       4:     option rpc-auth.auth-unix on
>>>       5:     option rpc-auth.auth-null on
>>>       6:     option transport.socket.listen-backlog 128
>>>       7:     option transport.socket.read-fail-log off
>>>       8:     option transport.socket.keepalive-interval 2
>>>       9:     option transport.socket.keepalive-time 10
>>>      10:     option transport-type rdma
>>>      11:     option working-directory /var/lib/glusterd
>>>      12: end-volume
>>>      13:
>>>     +------------------------------------------------------------------------------+
>>>
>>> Jorick
>>>
>>> On 08/12/2014 02:56 PM, Maor Lipchuk wrote:
>>>> Hi Jorick,
>>>> which version of GlusterFS are you using?
>>>>
>>>> Try to restart glusterd on each of the bricks, then try to follow this link:
>>>> http://joejulian.name/blog/glusterfs-path-or-a-prefix-of-it-is-already-part-of-a-volume/
>>>>
>>>> Please tell me if this helps
>>>>
>>>> Regards,
>>>> Maor
>>>>
>>>> ----- Original Message -----
>>>> From: "Jorick Astrego"<j.astrego at netbulae.eu>
>>>> To:users at ovirt.org
>>>> Sent: Tuesday, August 12, 2014 3:16:06 PM
>>>> Subject: [ovirt-users] method "glusterVolumesList" is not supported (Failed with error VDS_NETWORK_ERROR and code 5022)
>>>>
>>>> Hi,
>>>>
>>>> I'm trying to test glusterfs on a couple of Centos 7 ovirt nodes with ovirt 3.5rc1.
>>>>
>>>> I've enabled glusterfs service for the cluster, created a xfs data partition with mount point, installed "vdsm-gluster" rpm and started glusterfsd. I also cleared the firewall rules.
>>>>
>>>> When I try to add the storage domain, I get the following error
>>>>
>>>>
>>>> 2014-08-12 14:07:07,346 INFO [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (DefaultQuartzScheduler_Worker-65) START, GlusterVolumesListVDSCommand(HostName = node3.test.nu, HostId = 5bff5a65-6d3c-46b4-aa7c-d87ab25ccb3a), log id: 5d2ee913
>>>> 2014-08-12 14:07:07,350 ERROR [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (DefaultQuartzScheduler_Worker-65) Command GlusterVolumesListVDSCommand(HostName = node3.test.nu, HostId = 5bff5a65-6d3c-46b4-aa7c-d87ab25ccb3a) execution failed. Exception: VDSNetworkException: org.apache.xmlrpc.XmlRpcException: <type 'exceptions.Exception'>:method "glusterVolumesList" is not supported
>>>> 2014-08-12 14:07:07,350 INFO [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (DefaultQuartzScheduler_Worker-65) FINISH, GlusterVolumesListVDSCommand, log id: 5d2ee913
>>>> 2014-08-12 14:07:07,351 ERROR [org.ovirt.engine.core.bll.gluster.GlusterSyncJob] (DefaultQuartzScheduler_Worker-65) Error while refreshing Gluster lightweight data of cluster Default!: org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException: org.apache.xmlrpc.XmlRpcException: <type 'exceptions.Exception'>:method "glusterVolumesList" is not supported (Failed with error VDS_NETWORK_ERROR and code 5022)
>>>> at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:116) [bll.jar:]
>>>> at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.RunVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:]
>>>> at org.ovirt.engine.core.bll.gluster.GlusterJob.runVdsCommand(GlusterJob.java:65) [bll.jar:]
>>>> at org.ovirt.engine.core.bll.gluster.GlusterSyncJob.fetchVolumes(GlusterSyncJob.java:406) [bll.jar:]
>>>> at org.ovirt.engine.core.bll.gluster.GlusterSyncJob.fetchVolumes(GlusterSyncJob.java:392) [bll.jar:]
>>>> at org.ovirt.engine.core.bll.gluster.GlusterSyncJob.refreshVolumeData(GlusterSyncJob.java:363) [bll.jar:]
>>>> at org.ovirt.engine.core.bll.gluster.GlusterSyncJob.refreshClusterData(GlusterSyncJob.java:108) [bll.jar:]
>>>> at org.ovirt.engine.core.bll.gluster.GlusterSyncJob.refreshLightWeightData(GlusterSyncJob.java:87) [bll.jar:]
>>>> at sun.reflect.GeneratedMethodAccessor21.invoke(Unknown Source) [:1.7.0_65]
>>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.7.0_65]
>>>> at java.lang.reflect.Method.invoke(Method.java:606) [rt.jar:1.7.0_65]
>>>> at org.ovirt.engine.core.utils.timer.JobWrapper.execute(JobWrapper.java:60) [scheduler.jar:]
>>>> at org.quartz.core.JobRunShell.run(JobRunShell.java:213) [quartz.jar:]
>>>> at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:557) [quartz.jar:]
>>>>
>>>> Anything else I need to configure?
>>>>
>>>> Kind regards,
>>>> Jorick Astrego
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140812/8c738948/attachment-0001.html>


More information about the Users mailing list