[ovirt-users] Unable to assign profile to the nic

[Moti Asayag]

----- Original Message -----
> From: "Shanil S" <xielesshanil at gmail.com>
> To: users at ovirt.org
> Sent: Thursday, August 28, 2014 11:31:30 AM
> Subject: [ovirt-users] Unable to assign profile to the nic
> 
> Hi All,
> 
> I am unable to assign the profile using the ovirt api code, the following xml
> code is used for creating the nic
> 
> <nic>
> <interface>virtio</interface>
> <name>eth0</name>
> <boot_protocol>static</boot_protocol>
> <mac address='".$ip->mac_address."'/>
> <network>
> <ip address='".$ip->mac_ip."' netmask='255.255.255.0'
> gateway='".$ip->mac_gateway."'/>
> </network>

Try not to provide the 'network' element at all. The vnic profile replaced the 
'network' element when attaching a nic to a network.

In this context you should use either <network><name>...</name></network> or
the <vnic_profile id="..."/>.

As Juan explained in other thread, any other parameter for network are being
ignored and network element without name is referred as "empty network".

> <on_boot>true</on_boot>
> <vnic_profile id='bbabc471-667d-4221-bc8e-4ab30b3dcc34' />
> </nic>
> 
> Could you please check if anything wrong with it ?
> 
> 
> 
> --
> Regards
> Shanil
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>