[ovirt-users] Issues with vm start up
Shanil S
xielesshanil at gmail.com
Tue Dec 2 04:58:26 UTC 2014
Hi Omer,
We have opened this as a bug, you can view the new bug here
https://bugzilla.redhat.com/show_bug.cgi?id=1169625.
--
Regards
Shanil
On Tue, Dec 2, 2014 at 8:42 AM, Shanil S <xielesshanil at gmail.com> wrote:
> Hi Omer,
>
> Thanks for your reply. We will open it as a bug.
>
> --
> Regards
> Shanil
>
> On Mon, Dec 1, 2014 at 4:38 PM, Omer Frenkel <ofrenkel at redhat.com> wrote:
>
>>
>>
>> ----- Original Message -----
>> > From: "Shanil S" <xielesshanil at gmail.com>
>> > To: "Omer Frenkel" <ofrenkel at redhat.com>, users at ovirt.org, "Juan
>> Hernandez" <jhernand at redhat.com>
>> > Sent: Monday, December 1, 2014 12:39:12 PM
>> > Subject: Re: [ovirt-users] Issues with vm start up
>> >
>> > Hi Omer,
>> >
>> > Thanks for your reply.
>> >
>> > We are deploying those VM's through templates and all the templates has
>> > first boot from hard disk and second with cdrom. We are using cdrom in
>> > cloud-init section to insert the cloud-init data .Why we need this boot
>> > loader (VM boot order or in the cloud-init section) as in the template
>> the
>> > first boot order is harddisk ?
>> >
>> >
>>
>> if the template's boot order has hard-disk it should be ok,
>> not sure why it seems for this vm the boot order is only cd.
>> does this happen to any vm created from this template?
>> can you check the boot order is corrent in the edit vm dialog?
>>
>> if the boot order is ok in the template,
>> and it happens to any new vm from this template,
>> you should open a bug so we could investigate this.
>>
>> >
>> > --
>> > Regards
>> > Shanil
>> >
>> > On Mon, Dec 1, 2014 at 3:37 PM, Omer Frenkel <ofrenkel at redhat.com>
>> wrote:
>> >
>> > >
>> > >
>> > > ----- Original Message -----
>> > > > From: "Shanil S" <xielesshanil at gmail.com>
>> > > > To: "Shahar Havivi" <shaharh at redhat.com>
>> > > > Cc: users at ovirt.org, "Juan Hernandez" <jhernand at redhat.com>, "Omer
>> > > Frenkel" <ofrenkel at redhat.com>
>> > > > Sent: Thursday, November 27, 2014 10:32:54 AM
>> > > > Subject: Re: [ovirt-users] Issues with vm start up
>> > > >
>> > > > Hi Omer,
>> > > >
>> > > > I have attached the engine.log and vdsm.log. Please check it. The
>> vm id
>> > > is
>> > > > - 7c7aa9dedb57248f5da291117164f0d7
>> > > >
>> > >
>> > > sorry Shanil for the delay,
>> > > it looks that in the vm settings, you have chosen to boot only from
>> cd ?
>> > > this is why the vm doest boot, the cloud-init disk is a settings
>> disk, not
>> > > a boot disk
>> > > please go to update vm, change the boot order to use hard-disk, and
>> boot
>> > > the vm.
>> > >
>> > > let me know if it helps,
>> > > Omer.
>> > >
>> > > > --
>> > > > Regards
>> > > > Shanil
>> > > >
>> > > > On Thu, Nov 27, 2014 at 1:46 PM, Shahar Havivi <shaharh at redhat.com>
>> > > wrote:
>> > > >
>> > > > > Try to remove content and run the vm,
>> > > > > ie remove the runcmd: or some of it - try to use the xml with out
>> CDATA
>> > > > > maybe
>> > > > > you can pinpoint the problem that way...
>> > > > >
>> > > > >
>> > > > > On 27.11.14 10:03, Shanil S wrote:
>> > > > > > Hi All,
>> > > > > >
>> > > > > >
>> > > > > > I am using the ovirt version 3.5 and having some issues with
>> the vm
>> > > > > startup
>> > > > > > with cloud-init using api in run-once mode.....
>> > > > > >
>> > > > > > Below is the steps i follow :-
>> > > > > >
>> > > > > > 1. Create the VM by API from precreated Template..
>> > > > > > 2. Start the VM in run-once mode and push the cloud-init data
>> from
>> > > API..
>> > > > > > 3. VM stuck and from console it display the following :-
>> > > > > > Booting from DVD/CD.. ...
>> > > > > > Boot failed : could not read from CDROM (code 004)
>> > > > > >
>> > > > > > I am using the following xml for this operation :-
>> > > > > >
>> > > > > > <action>
>> > > > > > <vm>
>> > > > > > <os>
>> > > > > > <boot dev='cdrom'/>
>> > > > > > </os>
>> > > > > > <initialization>
>> > > > > > <cloud_init>
>> > > > > > <host>
>> > > > > > <address>test</address>
>> > > > > > </host>
>> > > > > > <network_configuration>
>> > > > > > <nics>
>> > > > > > <nic>
>> > > > > > <interface>virtIO</interface>
>> > > > > > <name>eth0</name>
>> > > > > > <boot_protocol>static</boot_protocol>
>> > > > > > <mac address=''/>
>> > > > > > <network>
>> > > > > > <ip address='' netmask='' gateway=''/>
>> > > > > > </network>
>> > > > > > <on_boot>true</on_boot><vnic_profile id='' />
>> > > > > > </nic>
>> > > > > > <nic>
>> > > > > > <interface>virtIO</interface>
>> > > > > > <name>eth1</name>
>> > > > > > <boot_protocol>static</boot_protocol>
>> > > > > > <mac address=''/>
>> > > > > > <network>
>> > > > > > <ip address='' netmask='255.255.255.0' gateway=''/>
>> > > > > > </network>
>> > > > > > <on_boot>true</on_boot><vnic_profile id='' />
>> > > > > > </nic>
>> > > > > > </nics>
>> > > > > > </network_configuration>
>> > > > > > <files>
>> > > > > > <file>
>> > > > > > <name>/ignored</name><content><![CDATA[#cloud-config
>> > > > > > disable-ec2-metadata: true
>> > > > > > disable_root: false
>> > > > > > ssh_pwauth: true
>> > > > > > ssh_deletekeys: true
>> > > > > > chpasswd: { expire: False }
>> > > > > >
>> > > > > > users:
>> > > > > > - name: root
>> > > > > > primary-group: root
>> > > > > > passwd: 8W7RQ5Bh
>> > > > > > lock-passwd: false
>> > > > > >
>> > > > > > runcmd:
>> > > > > > - sed -i '/nameserver/d' /etc/resolv.conf
>> > > > > > - echo 'nameserver 8.8.8.8' >> /etc/resolv.conf
>> > > > > > - echo 'nameserver 8.8.4.4' >> /etc/resolv.conf
>> > > > > > - echo 'root:8W7RQ5Bh' | chpasswd
>> > > > > > - yum -y update
>> > > > > > - yum -y install rdate
>> > > > > > - rdate -s stdtime.gov.hk]]></content>
>> > > > > > <type>plaintext</type>
>> > > > > > </file>
>> > > > > > </files>
>> > > > > > </cloud_init><custom_script><![CDATA[#cloud-config
>> > > > > > disable-ec2-metadata: true
>> > > > > > disable_root: false
>> > > > > > ssh_pwauth: true
>> > > > > > ssh_deletekeys: true
>> > > > > > chpasswd: { expire: False }
>> > > > > >
>> > > > > > users:
>> > > > > > - name: root
>> > > > > > primary-group: root
>> > > > > > passwd: 8W7RQ5Bh
>> > > > > > lock-passwd: false
>> > > > > >
>> > > > > > runcmd:
>> > > > > > - sed -i '/nameserver/d' /etc/resolv.conf
>> > > > > > - echo 'nameserver 8.8.8.8' >> /etc/resolv.conf
>> > > > > > - echo 'nameserver 8.8.4.4' >> /etc/resolv.conf
>> > > > > > - echo 'root:8W7RQ5Bh' | chpasswd
>> > > > > > - yum -y update
>> > > > > > - yum -y install rdate
>> > > > > > - rdate -s stdtime.gov.hk]]></custom_script>
>> > > > > > </initialization>
>> > > > > > </vm>
>> > > > > > </action>
>> > > > > >
>> > > > > > I am also attaching the screen shot to this.
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > > --
>> > > > > > Regards
>> > > > > > Shanil
>> > > > >
>> > > > >
>> > > > > > _______________________________________________
>> > > > > > Users mailing list
>> > > > > > Users at ovirt.org
>> > > > > > http://lists.ovirt.org/mailman/listinfo/users
>> > > > >
>> > > > >
>> > > >
>> > >
>> >
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141202/416893e8/attachment-0001.html>
More information about the Users
mailing list