[ovirt-users] [Gluster-users] Gluster command [<UNKNOWN>] failed on server...
Punit Dambiwal
hypunit at gmail.com
Tue Dec 2 14:33:24 UTC 2014
Hi Kaushal,
Please find the logs here :- http://ur1.ca/iyhs5 and http://ur1.ca/iyhue
Thanks,
punit
On Tue, Dec 2, 2014 at 12:00 PM, Kaushal M <kshlmster at gmail.com> wrote:
> Hey Punit,
> Could you start Glusterd in debug mode and provide the logs here?
> To start it in debug mode, append '-LDEBUG' to the ExecStart line in
> the service file.
>
> ~kaushal
>
> On Mon, Dec 1, 2014 at 9:05 AM, Punit Dambiwal <hypunit at gmail.com> wrote:
> > Hi,
> >
> > Can Any body help me on this ??
> >
> > On Thu, Nov 27, 2014 at 9:29 AM, Punit Dambiwal <hypunit at gmail.com>
> wrote:
> >>
> >> Hi Kaushal,
> >>
> >> Thanks for the detailed reply....let me explain my setup first :-
> >>
> >> 1. Ovirt Engine
> >> 2. 4* host as well as storage machine (Host and gluster combined)
> >> 3. Every host has 24 bricks...
> >>
> >> Now whenever the host machine reboot...it can come up but can not join
> the
> >> cluster again and through the following error "Gluster command
> [<UNKNOWN>]
> >> failed on server.."
> >>
> >> Please check my comment in line :-
> >>
> >> 1. Use the same string for doing the peer probe and for the brick
> address
> >> during volume create/add-brick. Ideally, we suggest you use properly
> >> resolvable FQDNs everywhere. If that is not possible, then use only IP
> >> addresses. Try to avoid short names.
> >> ---------------
> >> [root at cpu05 ~]# gluster peer status
> >> Number of Peers: 3
> >>
> >> Hostname: cpu03.stack.com
> >> Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb
> >> State: Peer in Cluster (Connected)
> >>
> >> Hostname: cpu04.stack.com
> >> Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0
> >> State: Peer in Cluster (Connected)
> >> Other names:
> >> 10.10.0.8
> >>
> >> Hostname: cpu02.stack.com
> >> Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25
> >> State: Peer in Cluster (Connected)
> >> [root at cpu05 ~]#
> >> ----------------
> >> 2. During boot up, make sure to launch glusterd only after the network
> is
> >> up. This will allow the new peer identification mechanism to do its
> >> job correctly.
> >> >> I think the service itself doing the same job....
> >>
> >> [root at cpu05 ~]# cat /usr/lib/systemd/system/glusterd.service
> >> [Unit]
> >> Description=GlusterFS, a clustered file-system server
> >> After=network.target rpcbind.service
> >> Before=network-online.target
> >>
> >> [Service]
> >> Type=forking
> >> PIDFile=/var/run/glusterd.pid
> >> LimitNOFILE=65536
> >> ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid
> >> KillMode=process
> >>
> >> [Install]
> >> WantedBy=multi-user.target
> >> [root at cpu05 ~]#
> >> --------------------
> >>
> >> gluster logs :-
> >>
> >> [2014-11-24 09:22:22.147471] I [MSGID: 100030] [glusterfsd.c:2018:main]
> >> 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.6.1
> >> (args: /usr/sbin/glusterd -p /var/run/glusterd.pid)
> >> [2014-11-24 09:22:22.151565] I [glusterd.c:1214:init] 0-management:
> >> Maximum allowed open file descriptors set to 65536
> >> [2014-11-24 09:22:22.151599] I [glusterd.c:1259:init] 0-management:
> Using
> >> /var/lib/glusterd as working directory
> >> [2014-11-24 09:22:22.155216] W [rdma.c:4195:__gf_rdma_ctx_create]
> >> 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such
> device)
> >> [2014-11-24 09:22:22.155264] E [rdma.c:4483:init] 0-rdma.management:
> >> Failed to initialize IB Device
> >> [2014-11-24 09:22:22.155285] E [rpc-transport.c:333:rpc_transport_load]
> >> 0-rpc-transport: 'rdma' initialization failed
> >> [2014-11-24 09:22:22.155354] W [rpcsvc.c:1524:rpcsvc_transport_create]
> >> 0-rpc-service: cannot create listener, initing the transport failed
> >> [2014-11-24 09:22:22.156290] I
> >> [glusterd.c:413:glusterd_check_gsync_present] 0-glusterd:
> geo-replication
> >> module not installed in the system
> >> [2014-11-24 09:22:22.161318] I
> >> [glusterd-store.c:2043:glusterd_restore_op_version] 0-glusterd:
> retrieved
> >> op-version: 30600
> >> [2014-11-24 09:22:22.821800] I
> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
> 0-management:
> >> connect returned 0
> >> [2014-11-24 09:22:22.825810] I
> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
> 0-management:
> >> connect returned 0
> >> [2014-11-24 09:22:22.828705] I
> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
> 0-management:
> >> connect returned 0
> >> [2014-11-24 09:22:22.828771] I [rpc-clnt.c:969:rpc_clnt_connection_init]
> >> 0-management: setting frame-timeout to 600
> >> [2014-11-24 09:22:22.832670] I [rpc-clnt.c:969:rpc_clnt_connection_init]
> >> 0-management: setting frame-timeout to 600
> >> [2014-11-24 09:22:22.835919] I [rpc-clnt.c:969:rpc_clnt_connection_init]
> >> 0-management: setting frame-timeout to 600
> >> [2014-11-24 09:22:22.840209] E
> >> [glusterd-store.c:4248:glusterd_resolve_all_bricks] 0-glusterd: resolve
> >> brick failed in restore
> >> [2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init] 0-management:
> >> Initialization of volume 'management' failed, review your volfile again
> >> [2014-11-24 09:22:22.840245] E [graph.c:322:glusterfs_graph_init]
> >> 0-management: initializing translator failed
> >> [2014-11-24 09:22:22.840264] E [graph.c:525:glusterfs_graph_activate]
> >> 0-graph: init failed
> >> [2014-11-24 09:22:22.840754] W [glusterfsd.c:1194:cleanup_and_exit] (-->
> >> 0-: received signum (0), shutting down
> >>
> >> Thanks,
> >> Punit
> >>
> >>
> >>
> >>
> >> On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M <kshlmster at gmail.com> wrote:
> >>>
> >>> Based on the logs I can guess that glusterd is being started before
> >>> the network has come up and that the addresses given to bricks do not
> >>> directly match the addresses used in during peer probe.
> >>>
> >>> The gluster_after_reboot log has the line "[2014-11-25
> >>> 06:46:09.972113] E [glusterd-store.c:2632:glusterd_resolve_all_bricks]
> >>> 0-glusterd: resolve brick failed in restore".
> >>>
> >>> Brick resolution fails when glusterd cannot match the address for the
> >>> brick, with one of the peers. Brick resolution happens in two phases,
> >>> 1. We first try to identify the peer by performing string comparisions
> >>> with the brick address and the peer addresses (The peer names will be
> >>> the names/addresses that were given when the peer was probed).
> >>> 2. If we don't find a match from step 1, we will then resolve all the
> >>> brick address and the peer addresses into addrinfo structs, and then
> >>> compare these structs to find a match. This process should generally
> >>> find a match if available. This will fail only if the network is not
> >>> up yet as we cannot resolve addresses.
> >>>
> >>> The above steps are applicable only to glusterfs versions >=3.6. They
> >>> were introduced to reduce problems with peer identification, like the
> >>> one you encountered
> >>>
> >>> Since both of the steps failed to find a match in one run, but
> >>> succeeded later, we can come to the conclusion that,
> >>> a) the bricks don't have the exact same string used in peer probe for
> >>> their addresses as step 1 failed, and
> >>> b) the network was not up in the initial run, as step 2 failed during
> >>> the initial run, but passed in the second run.
> >>>
> >>> Please let me know if my conclusion is correct.
> >>>
> >>> If it is, you can solve your problem in two ways.
> >>> 1. Use the same string for doing the peer probe and for the brick
> >>> address during volume create/add-brick. Ideally, we suggest you use
> >>> properly resolvable FQDNs everywhere. If that is not possible, then
> >>> use only IP addresses. Try to avoid short names.
> >>> 2. During boot up, make sure to launch glusterd only after the network
> >>> is up. This will allow the new peer identification mechanism to do its
> >>> job correctly.
> >>>
> >>>
> >>> If you have already followed these steps and yet still hit the
> >>> problem, then please provide more information (setup, logs, etc.). It
> >>> could be much different problem that you are facing.
> >>>
> >>> ~kaushal
> >>>
> >>> On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal <hypunit at gmail.com>
> >>> wrote:
> >>> > Is there any one can help on this ??
> >>> >
> >>> > Thanks,
> >>> > punit
> >>> >
> >>> > On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal <hypunit at gmail.com>
> >>> > wrote:
> >>> >>
> >>> >> Hi,
> >>> >>
> >>> >> My Glusterfs version is :- glusterfs-3.6.1-1.el7
> >>> >>
> >>> >> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy
> >>> >> <kmayilsa at redhat.com>
> >>> >> wrote:
> >>> >>>
> >>> >>> [+Gluster-users at gluster.org]
> >>> >>>
> >>> >>> "Initialization of volume 'management' failed, review your volfile
> >>> >>> again", glusterd throws this error when the service is started
> >>> >>> automatically
> >>> >>> after the reboot. But the service is successfully started later
> >>> >>> manually by
> >>> >>> the user.
> >>> >>>
> >>> >>> can somebody from gluster-users please help on this?
> >>> >>>
> >>> >>> glusterfs version: 3.5.1
> >>> >>>
> >>> >>> Thanks,
> >>> >>> Kanagaraj
> >>> >>>
> >>> >>> ----- Original Message -----
> >>> >>> > From: "Punit Dambiwal" <hypunit at gmail.com>
> >>> >>> > To: "Kanagaraj" <kmayilsa at redhat.com>
> >>> >>> > Cc: users at ovirt.org
> >>> >>> > Sent: Tuesday, November 25, 2014 7:24:45 PM
> >>> >>> > Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>] failed on
> >>> >>> > server...
> >>> >>> >
> >>> >>> > Hi Kanagraj,
> >>> >>> >
> >>> >>> > Please check the attached log files....i didn't find any thing
> >>> >>> > special....
> >>> >>> >
> >>> >>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj <kmayilsa at redhat.com
> >
> >>> >>> > wrote:
> >>> >>> >
> >>> >>> > > Do you see any errors in
> >>> >>> > > /var/log/glusterfs/etc-glusterfs-glusterd.vol.log or vdsm.log
> >>> >>> > > when
> >>> >>> > > the
> >>> >>> > > service is trying to start automatically after the reboot?
> >>> >>> > >
> >>> >>> > > Thanks,
> >>> >>> > > Kanagaraj
> >>> >>> > >
> >>> >>> > >
> >>> >>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote:
> >>> >>> > >
> >>> >>> > > Hi Kanagaraj,
> >>> >>> > >
> >>> >>> > > Yes...once i will start the gluster service and then vdsmd
> >>> >>> > > ...the
> >>> >>> > > host
> >>> >>> > > can connect to cluster...but the question is why it's not
> started
> >>> >>> > > even it
> >>> >>> > > has chkconfig enabled...
> >>> >>> > >
> >>> >>> > > I have tested it in two host cluster environment...(Centos 6.6
> >>> >>> > > and
> >>> >>> > > centos 7.0) on both hypervisior cluster..it's failed to
> reconnect
> >>> >>> > > in
> >>> >>> > > to
> >>> >>> > > cluster after reboot....
> >>> >>> > >
> >>> >>> > > In both the environment glusterd enabled for next boot....but
> >>> >>> > > it's
> >>> >>> > > failed with the same error....seems it's bug in either gluster
> or
> >>> >>> > > Ovirt ??
> >>> >>> > >
> >>> >>> > > Please help me to find the workaround here if can not resolve
> >>> >>> > > it...as
> >>> >>> > > without this the Host machine can not connect after
> >>> >>> > > reboot....that
> >>> >>> > > means
> >>> >>> > > engine will consider it as down and every time need to manually
> >>> >>> > > start
> >>> >>> > > the
> >>> >>> > > gluster service and vdsmd... ??
> >>> >>> > >
> >>> >>> > > Thanks,
> >>> >>> > > Punit
> >>> >>> > >
> >>> >>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj <
> kmayilsa at redhat.com>
> >>> >>> > > wrote:
> >>> >>> > >
> >>> >>> > >> From vdsm.log "error: Connection failed. Please check if
> >>> >>> > >> gluster
> >>> >>> > >> daemon
> >>> >>> > >> is operational."
> >>> >>> > >>
> >>> >>> > >> Starting glusterd service should fix this issue. 'service
> >>> >>> > >> glusterd
> >>> >>> > >> start'
> >>> >>> > >> But i am wondering why the glusterd was not started
> >>> >>> > >> automatically
> >>> >>> > >> after
> >>> >>> > >> the reboot.
> >>> >>> > >>
> >>> >>> > >> Thanks,
> >>> >>> > >> Kanagaraj
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal wrote:
> >>> >>> > >>
> >>> >>> > >> Hi Kanagaraj,
> >>> >>> > >>
> >>> >>> > >> Please find the attached VDSM logs :-
> >>> >>> > >>
> >>> >>> > >> ----------------
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> 21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
> >>> >>> > >> Owner.cancelAll requests {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:17,182::task::993::Storage.TaskManager.Task::(_decref)
> >>> >>> > >> Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0 aborting
> >>> >>> > >> False
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> 21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState)
> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state
> >>> >>> > >> init
> >>> >>> > >> ->
> >>> >>> > >> state preparing
> >>> >>> > >> Thread-13::INFO::2014-11-24
> >>> >>> > >> 21:41:32,393::logUtils::44::dispatcher::(wrapper) Run and
> >>> >>> > >> protect:
> >>> >>> > >> repoStats(options=None)
> >>> >>> > >> Thread-13::INFO::2014-11-24
> >>> >>> > >> 21:41:32,393::logUtils::47::dispatcher::(wrapper) Run and
> >>> >>> > >> protect:
> >>> >>> > >> repoStats, Return response: {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare)
> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> 21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState)
> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state
> >>> >>> > >> preparing
> >>> >>> > >> ->
> >>> >>> > >> state finished
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> 21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
> >>> >>> > >> Owner.releaseAll requests {} resources {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> 21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
> >>> >>> > >> Owner.cancelAll requests {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:32,394::task::993::Storage.TaskManager.Task::(_decref)
> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0 aborting
> >>> >>> > >> False
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) client
> >>> >>> > >> [10.10.10.2]::call
> >>> >>> > >> getCapabilities with () {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,553::utils::738::root::(execCmd)
> >>> >>> > >> /sbin/ip route show to 0.0.0.0/0 table all (cwd None)
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,560::utils::758::root::(execCmd)
> >>> >>> > >> SUCCESS: <err> = ''; <rc> = 0
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,588::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,592::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-object',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,593::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-plugin',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-account',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-proxy',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-doc',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-container',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('glusterfs-geo-replication',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,600::caps::646::root::(get)
> >>> >>> > >> VirtioRNG DISABLED: libvirt version 0.10.2-29.el6_5.9 required
> >>> >>> > >> >=
> >>> >>> > >> 0.10.2-31
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,603::BindingXMLRPC::1139::vds::(wrapper) return
> >>> >>> > >> getCapabilities
> >>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info':
> >>> >>> > >> {'HBAInventory':
> >>> >>> > >> {'iSCSI': [{'InitiatorName':
> >>> >>> > >> 'iqn.1994-05.com.redhat:32151ce183c8'}],
> >>> >>> > >> 'FC':
> >>> >>> > >> []}, 'packages2': {'kernel': {'release': '431.el6.x86_64',
> >>> >>> > >> 'buildtime':
> >>> >>> > >> 1385061309.0, 'version': '2.6.32'}, 'glusterfs-rdma':
> >>> >>> > >> {'release':
> >>> >>> > >> '1.el6',
> >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'},
> 'glusterfs-fuse':
> >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version':
> >>> >>> > >> '3.5.1'},
> >>> >>> > >> 'spice-server': {'release': '6.el6_5.2', 'buildtime':
> >>> >>> > >> 1402324637L,
> >>> >>> > >> 'version': '0.12.4'}, 'vdsm': {'release': '1.gitdb83943.el6',
> >>> >>> > >> 'buildtime':
> >>> >>> > >> 1412784567L, 'version': '4.16.7'}, 'qemu-kvm': {'release':
> >>> >>> > >> '2.415.el6_5.10', 'buildtime': 1402435700L, 'version':
> >>> >>> > >> '0.12.1.2'},
> >>> >>> > >> 'qemu-img': {'release': '2.415.el6_5.10', 'buildtime':
> >>> >>> > >> 1402435700L,
> >>> >>> > >> 'version': '0.12.1.2'}, 'libvirt': {'release': '29.el6_5.9',
> >>> >>> > >> 'buildtime':
> >>> >>> > >> 1402404612L, 'version': '0.10.2'}, 'glusterfs': {'release':
> >>> >>> > >> '1.el6',
> >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'mom':
> >>> >>> > >> {'release':
> >>> >>> > >> '2.el6',
> >>> >>> > >> 'buildtime': 1403794344L, 'version': '0.4.1'},
> >>> >>> > >> 'glusterfs-server':
> >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version':
> >>> >>> > >> '3.5.1'}},
> >>> >>> > >> 'numaNodeDistance': {'1': [20, 10], '0': [10, 20]},
> 'cpuModel':
> >>> >>> > >> 'Intel(R)
> >>> >>> > >> Xeon(R) CPU X5650 @ 2.67GHz', 'liveMerge': 'false',
> >>> >>> > >> 'hooks':
> >>> >>> > >> {},
> >>> >>> > >> 'cpuSockets': '2', 'vmTypes': ['kvm'], 'selinux': {'mode':
> '1'},
> >>> >>> > >> 'kdumpStatus': 0, 'supportedProtocols': ['2.2', '2.3'],
> >>> >>> > >> 'networks':
> >>> >>> > >> {'ovirtmgmt': {'iface': u'bond0.10', 'addr': '43.252.176.16',
> >>> >>> > >> 'bridged':
> >>> >>> > >> False, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu':
> >>> >>> > >> '1500',
> >>> >>> > >> 'bootproto4': 'none', 'netmask': '255.255.255.0', 'ipv4addrs':
> >>> >>> > >> ['
> >>> >>> > >> 43.252.176.16/24' <http://43.252.176.16/24%27>], 'interface':
> >>> >>> > >> u'bond0.10', 'ipv6gateway': '::', 'gateway': '43.25.17.1'},
> >>> >>> > >> 'Internal':
> >>> >>> > >> {'iface': 'Internal', 'addr': '', 'cfg': {'DEFROUTE': 'no',
> >>> >>> > >> 'HOTPLUG':
> >>> >>> > >> 'no', 'MTU': '9000', 'DELAY': '0', 'NM_CONTROLLED': 'no',
> >>> >>> > >> 'BOOTPROTO':
> >>> >>> > >> 'none', 'STP': 'off', 'DEVICE': 'Internal', 'TYPE': 'Bridge',
> >>> >>> > >> 'ONBOOT':
> >>> >>> > >> 'no'}, 'bridged': True, 'ipv6addrs':
> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'],
> >>> >>> > >> 'gateway': '', 'bootproto4': 'none', 'netmask': '', 'stp':
> >>> >>> > >> 'off',
> >>> >>> > >> 'ipv4addrs': [], 'mtu': '9000', 'ipv6gateway': '::', 'ports':
> >>> >>> > >> ['bond1.100']}, 'storage': {'iface': u'bond1', 'addr':
> >>> >>> > >> '10.10.10.6',
> >>> >>> > >> 'bridged': False, 'ipv6addrs':
> ['fe80::210:18ff:fecd:daac/64'],
> >>> >>> > >> 'mtu':
> >>> >>> > >> '9000', 'bootproto4': 'none', 'netmask': '255.255.255.0',
> >>> >>> > >> 'ipv4addrs': ['
> >>> >>> > >> 10.10.10.6/24' <http://10.10.10.6/24%27>], 'interface':
> >>> >>> > >> u'bond1',
> >>> >>> > >> 'ipv6gateway': '::', 'gateway': ''}, 'VMNetwork': {'iface':
> >>> >>> > >> 'VMNetwork',
> >>> >>> > >> 'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU':
> >>> >>> > >> '1500',
> >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none',
> 'STP':
> >>> >>> > >> 'off',
> >>> >>> > >> 'DEVICE': 'VMNetwork', 'TYPE': 'Bridge', 'ONBOOT': 'no'},
> >>> >>> > >> 'bridged':
> >>> >>> > >> True,
> >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'gateway': '',
> >>> >>> > >> 'bootproto4':
> >>> >>> > >> 'none', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], 'mtu':
> >>> >>> > >> '1500',
> >>> >>> > >> 'ipv6gateway': '::', 'ports': ['bond0.36']}}, 'bridges':
> >>> >>> > >> {'Internal':
> >>> >>> > >> {'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU':
> >>> >>> > >> '9000',
> >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none',
> 'STP':
> >>> >>> > >> 'off',
> >>> >>> > >> 'DEVICE': 'Internal', 'TYPE': 'Bridge', 'ONBOOT': 'no'},
> >>> >>> > >> 'ipv6addrs':
> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], 'mtu': '9000', 'netmask': '',
> >>> >>> > >> 'stp':
> >>> >>> > >> 'off', 'ipv4addrs': [], 'ipv6gateway': '::', 'gateway': '',
> >>> >>> > >> 'opts':
> >>> >>> > >> {'topology_change_detected': '0',
> 'multicast_last_member_count':
> >>> >>> > >> '2',
> >>> >>> > >> 'hash_elasticity': '4', 'multicast_query_response_interval':
> >>> >>> > >> '999',
> >>> >>> > >> 'multicast_snooping': '1', 'multicast_startup_query_interval':
> >>> >>> > >> '3124',
> >>> >>> > >> 'hello_timer': '31', 'multicast_querier_interval': '25496',
> >>> >>> > >> 'max_age':
> >>> >>> > >> '1999', 'hash_max': '512', 'stp_state': '0', 'root_id':
> >>> >>> > >> '8000.001018cddaac', 'priority': '32768',
> >>> >>> > >> 'multicast_membership_interval':
> >>> >>> > >> '25996', 'root_path_cost': '0', 'root_port': '0',
> >>> >>> > >> 'multicast_querier':
> >>> >>> > >> '0',
> >>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199',
> >>> >>> > >> 'topology_change': '0', 'bridge_id': '8000.001018cddaac',
> >>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995',
> >>> >>> > >> 'gc_timer':
> >>> >>> > >> '31',
> >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0',
> >>> >>> > >> 'multicast_query_interval': '12498',
> >>> >>> > >> 'multicast_last_member_interval':
> >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports':
> >>> >>> > >> ['bond1.100']}, 'VMNetwork': {'addr': '', 'cfg': {'DEFROUTE':
> >>> >>> > >> 'no',
> >>> >>> > >> 'HOTPLUG': 'no', 'MTU': '1500', 'DELAY': '0', 'NM_CONTROLLED':
> >>> >>> > >> 'no',
> >>> >>> > >> 'BOOTPROTO': 'none', 'STP': 'off', 'DEVICE': 'VMNetwork',
> >>> >>> > >> 'TYPE':
> >>> >>> > >> 'Bridge',
> >>> >>> > >> 'ONBOOT': 'no'}, 'ipv6addrs':
> ['fe80::62eb:69ff:fe20:b46c/64'],
> >>> >>> > >> 'mtu':
> >>> >>> > >> '1500', 'netmask': '', 'stp': 'off', 'ipv4addrs': [],
> >>> >>> > >> 'ipv6gateway':
> >>> >>> > >> '::',
> >>> >>> > >> 'gateway': '', 'opts': {'topology_change_detected': '0',
> >>> >>> > >> 'multicast_last_member_count': '2', 'hash_elasticity': '4',
> >>> >>> > >> 'multicast_query_response_interval': '999',
> >>> >>> > >> 'multicast_snooping':
> >>> >>> > >> '1',
> >>> >>> > >> 'multicast_startup_query_interval': '3124', 'hello_timer':
> >>> >>> > >> '131',
> >>> >>> > >> 'multicast_querier_interval': '25496', 'max_age': '1999',
> >>> >>> > >> 'hash_max':
> >>> >>> > >> '512', 'stp_state': '0', 'root_id': '8000.60eb6920b46c',
> >>> >>> > >> 'priority':
> >>> >>> > >> '32768', 'multicast_membership_interval': '25996',
> >>> >>> > >> 'root_path_cost':
> >>> >>> > >> '0',
> >>> >>> > >> 'root_port': '0', 'multicast_querier': '0',
> >>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199',
> >>> >>> > >> 'topology_change': '0', 'bridge_id': '8000.60eb6920b46c',
> >>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995',
> >>> >>> > >> 'gc_timer':
> >>> >>> > >> '31',
> >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0',
> >>> >>> > >> 'multicast_query_interval': '12498',
> >>> >>> > >> 'multicast_last_member_interval':
> >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports':
> >>> >>> > >> ['bond0.36']}}, 'uuid':
> '44454C4C-4C00-1057-8053-B7C04F504E31',
> >>> >>> > >> 'lastClientIface': 'bond1', 'nics': {'eth3': {'permhwaddr':
> >>> >>> > >> '00:10:18:cd:da:ae', 'addr': '', 'cfg': {'SLAVE': 'yes',
> >>> >>> > >> 'NM_CONTROLLED':
> >>> >>> > >> 'no', 'MTU': '9000', 'HWADDR': '00:10:18:cd:da:ae', 'MASTER':
> >>> >>> > >> 'bond1',
> >>> >>> > >> 'DEVICE': 'eth3', 'ONBOOT': 'no'}, 'ipv6addrs': [], 'mtu':
> >>> >>> > >> '9000',
> >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '00:10:18:cd:da:ac',
> >>> >>> > >> 'speed':
> >>> >>> > >> 1000}, 'eth2': {'permhwaddr': '00:10:18:cd:da:ac', 'addr': '',
> >>> >>> > >> 'cfg':
> >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '9000',
> 'HWADDR':
> >>> >>> > >> '00:10:18:cd:da:ac', 'MASTER': 'bond1', 'DEVICE': 'eth2',
> >>> >>> > >> 'ONBOOT':
> >>> >>> > >> 'no'},
> >>> >>> > >> 'ipv6addrs': [], 'mtu': '9000', 'netmask': '', 'ipv4addrs':
> [],
> >>> >>> > >> 'hwaddr':
> >>> >>> > >> '00:10:18:cd:da:ac', 'speed': 1000}, 'eth1': {'permhwaddr':
> >>> >>> > >> '60:eb:69:20:b4:6d', 'addr': '', 'cfg': {'SLAVE': 'yes',
> >>> >>> > >> 'NM_CONTROLLED':
> >>> >>> > >> 'no', 'MTU': '1500', 'HWADDR': '60:eb:69:20:b4:6d', 'MASTER':
> >>> >>> > >> 'bond0',
> >>> >>> > >> 'DEVICE': 'eth1', 'ONBOOT': 'yes'}, 'ipv6addrs': [], 'mtu':
> >>> >>> > >> '1500',
> >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c',
> >>> >>> > >> 'speed':
> >>> >>> > >> 1000}, 'eth0': {'permhwaddr': '60:eb:69:20:b4:6c', 'addr': '',
> >>> >>> > >> 'cfg':
> >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '1500',
> 'HWADDR':
> >>> >>> > >> '60:eb:69:20:b4:6c', 'MASTER': 'bond0', 'DEVICE': 'eth0',
> >>> >>> > >> 'ONBOOT':
> >>> >>> > >> 'yes'},
> >>> >>> > >> 'ipv6addrs': [], 'mtu': '1500', 'netmask': '', 'ipv4addrs':
> [],
> >>> >>> > >> 'hwaddr':
> >>> >>> > >> '60:eb:69:20:b4:6c', 'speed': 1000}}, 'software_revision':
> '1',
> >>> >>> > >> 'clusterLevels': ['3.0', '3.1', '3.2', '3.3', '3.4', '3.5'],
> >>> >>> > >> 'cpuFlags':
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270',
> >>> >>> > >> 'ISCSIInitiatorName': 'iqn.1994-05.com.redhat:32151ce183c8',
> >>> >>> > >> 'netConfigDirty': 'False', 'supportedENGINEs': ['3.0', '3.1',
> >>> >>> > >> '3.2',
> >>> >>> > >> '3.3',
> >>> >>> > >> '3.4', '3.5'], 'autoNumaBalancing': 2, 'reservedMem': '321',
> >>> >>> > >> 'bondings':
> >>> >>> > >> {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask':
> '',
> >>> >>> > >> 'slaves':
> >>> >>> > >> [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '',
> 'cfg':
> >>> >>> > >> {'HOTPLUG': 'no', 'MTU': '1500', 'NM_CONTROLLED': 'no',
> >>> >>> > >> 'BONDING_OPTS':
> >>> >>> > >> 'mode=4 miimon=100', 'DEVICE': 'bond0', 'ONBOOT': 'yes'},
> >>> >>> > >> 'ipv6addrs':
> >>> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': '1500', 'netmask':
> '',
> >>> >>> > >> 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', 'slaves':
> >>> >>> > >> ['eth0',
> >>> >>> > >> 'eth1'],
> >>> >>> > >> 'opts': {'miimon': '100', 'mode': '4'}}, 'bond1': {'addr':
> >>> >>> > >> '10.10.10.6',
> >>> >>> > >> 'cfg': {'DEFROUTE': 'no', 'IPADDR': '10.10.10.6', 'HOTPLUG':
> >>> >>> > >> 'no',
> >>> >>> > >> 'MTU':
> >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0',
> >>> >>> > >> 'BOOTPROTO':
> >>> >>> > >> 'none', 'BONDING_OPTS': 'mode=4 miimon=100', 'DEVICE':
> 'bond1',
> >>> >>> > >> 'ONBOOT':
> >>> >>> > >> 'no'}, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'mtu':
> >>> >>> > >> '9000',
> >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['10.10.10.6/24'
> >>> >>> > >> <http://10.10.10.6/24%27>], 'hwaddr': '00:10:18:cd:da:ac',
> >>> >>> > >> 'slaves':
> >>> >>> > >> ['eth2', 'eth3'], 'opts': {'miimon': '100', 'mode': '4'}},
> >>> >>> > >> 'bond2':
> >>> >>> > >> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '',
> 'slaves':
> >>> >>> > >> [],
> >>> >>> > >> 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg':
> {},
> >>> >>> > >> 'mtu':
> >>> >>> > >> '1500', 'netmask': '', 'slaves': [], 'hwaddr':
> >>> >>> > >> '00:00:00:00:00:00'}},
> >>> >>> > >> 'software_version': '4.16', 'memSize': '24019', 'cpuSpeed':
> >>> >>> > >> '2667.000',
> >>> >>> > >> 'numaNodes': {u'1': {'totalMemory': '12288', 'cpus': [6, 7, 8,
> >>> >>> > >> 9,
> >>> >>> > >> 10, 11,
> >>> >>> > >> 18, 19, 20, 21, 22, 23]}, u'0': {'totalMemory': '12278',
> 'cpus':
> >>> >>> > >> [0,
> >>> >>> > >> 1, 2,
> >>> >>> > >> 3, 4, 5, 12, 13, 14, 15, 16, 17]}}, 'version_name': 'Snow
> Man',
> >>> >>> > >> 'vlans':
> >>> >>> > >> {'bond0.10': {'iface': 'bond0', 'addr': '43.25.17.16', 'cfg':
> >>> >>> > >> {'DEFROUTE':
> >>> >>> > >> 'yes', 'VLAN': 'yes', 'IPADDR': '43.25.17.16', 'HOTPLUG':
> 'no',
> >>> >>> > >> 'GATEWAY':
> >>> >>> > >> '43.25.17.1', 'NM_CONTROLLED': 'no', 'NETMASK':
> '255.255.255.0',
> >>> >>> > >> 'BOOTPROTO': 'none', 'DEVICE': 'bond0.10', 'MTU': '1500',
> >>> >>> > >> 'ONBOOT':
> >>> >>> > >> 'yes'},
> >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 10,
> >>> >>> > >> 'mtu':
> >>> >>> > >> '1500',
> >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['43.25.17.16/24']
> >>> >>> > >> <http://43.25.17.16/24%27%5D>}, 'bond0.36': {'iface':
> 'bond0',
> >>> >>> > >> 'addr':
> >>> >>> > >> '', 'cfg': {'BRIDGE': 'VMNetwork', 'VLAN': 'yes', 'HOTPLUG':
> >>> >>> > >> 'no',
> >>> >>> > >> 'MTU':
> >>> >>> > >> '1500', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond0.36', 'ONBOOT':
> >>> >>> > >> 'no'},
> >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 36,
> >>> >>> > >> 'mtu':
> >>> >>> > >> '1500',
> >>> >>> > >> 'netmask': '', 'ipv4addrs': []}, 'bond1.100': {'iface':
> 'bond1',
> >>> >>> > >> 'addr':
> >>> >>> > >> '', 'cfg': {'BRIDGE': 'Internal', 'VLAN': 'yes', 'HOTPLUG':
> >>> >>> > >> 'no',
> >>> >>> > >> 'MTU':
> >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond1.100',
> 'ONBOOT':
> >>> >>> > >> 'no'},
> >>> >>> > >> 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'vlanid': 100,
> >>> >>> > >> 'mtu':
> >>> >>> > >> '9000',
> >>> >>> > >> 'netmask': '', 'ipv4addrs': []}}, 'cpuCores': '12',
> >>> >>> > >> 'kvmEnabled':
> >>> >>> > >> 'true',
> >>> >>> > >> 'guestOverhead': '65', 'cpuThreads': '24', 'emulatedMachines':
> >>> >>> > >> [u'rhel6.5.0', u'pc', u'rhel6.4.0', u'rhel6.3.0',
> u'rhel6.2.0',
> >>> >>> > >> u'rhel6.1.0', u'rhel6.0.0', u'rhel5.5.0', u'rhel5.4.4',
> >>> >>> > >> u'rhel5.4.0'],
> >>> >>> > >> 'operatingSystem': {'release': '5.el6.centos.11.1', 'version':
> >>> >>> > >> '6',
> >>> >>> > >> 'name':
> >>> >>> > >> 'RHEL'}, 'lastClient': '10.10.10.2'}}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,620::BindingXMLRPC::1132::vds::(wrapper) client
> >>> >>> > >> [10.10.10.2]::call
> >>> >>> > >> getHardwareInfo with () {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,621::BindingXMLRPC::1139::vds::(wrapper) return
> >>> >>> > >> getHardwareInfo
> >>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info':
> >>> >>> > >> {'systemProductName': 'CS24-TY', 'systemSerialNumber':
> >>> >>> > >> '7LWSPN1',
> >>> >>> > >> 'systemFamily': 'Server', 'systemVersion': 'A00',
> 'systemUUID':
> >>> >>> > >> '44454c4c-4c00-1057-8053-b7c04f504e31', 'systemManufacturer':
> >>> >>> > >> 'Dell'}}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,733::BindingXMLRPC::1132::vds::(wrapper) client
> >>> >>> > >> [10.10.10.2]::call
> >>> >>> > >> hostsList with () {} flowID [222e8036]
> >>> >>> > >> Thread-13::ERROR::2014-11-24
> >>> >>> > >> 21:41:44,753::BindingXMLRPC::1148::vds::(wrapper) vdsm
> exception
> >>> >>> > >> occured
> >>> >>> > >> Traceback (most recent call last):
> >>> >>> > >> File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135, in
> >>> >>> > >> wrapper
> >>> >>> > >> res = f(*args, **kwargs)
> >>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 54, in wrapper
> >>> >>> > >> rv = func(*args, **kwargs)
> >>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 251, in
> hostsList
> >>> >>> > >> return {'hosts': self.svdsmProxy.glusterPeerStatus()}
> >>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 50, in __call__
> >>> >>> > >> return callMethod()
> >>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda>
> >>> >>> > >> **kwargs)
> >>> >>> > >> File "<string>", line 2, in glusterPeerStatus
> >>> >>> > >> File "/usr/lib64/python2.6/multiprocessing/managers.py",
> line
> >>> >>> > >> 740,
> >>> >>> > >> in
> >>> >>> > >> _callmethod
> >>> >>> > >> raise convert_to_error(kind, result)
> >>> >>> > >> GlusterCmdExecFailedException: Command execution failed
> >>> >>> > >> error: Connection failed. Please check if gluster daemon is
> >>> >>> > >> operational.
> >>> >>> > >> return code: 1
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> 21:41:50,949::task::595::Storage.TaskManager.Task::(_updateState)
> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state
> >>> >>> > >> init
> >>> >>> > >> ->
> >>> >>> > >> state preparing
> >>> >>> > >> Thread-13::INFO::2014-11-24
> >>> >>> > >> 21:41:50,950::logUtils::44::dispatcher::(wrapper) Run and
> >>> >>> > >> protect:
> >>> >>> > >> repoStats(options=None)
> >>> >>> > >> Thread-13::INFO::2014-11-24
> >>> >>> > >> 21:41:50,950::logUtils::47::dispatcher::(wrapper) Run and
> >>> >>> > >> protect:
> >>> >>> > >> repoStats, Return response: {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:50,950::task::1191::Storage.TaskManager.Task::(prepare)
> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::finished: {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> 21:41:50,950::task::595::Storage.TaskManager.Task::(_updateState)
> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state
> >>> >>> > >> preparing
> >>> >>> > >> ->
> >>> >>> > >> state finished
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> 21:41:50,951::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
> >>> >>> > >> Owner.releaseAll requests {} resources {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> 21:41:50,951::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
> >>> >>> > >> Owner.cancelAll requests {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:50,951::task::993::Storage.TaskManager.Task::(_decref)
> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::ref 0 aborting
> >>> >>> > >> False
> >>> >>> > >> -------------------------------
> >>> >>> > >>
> >>> >>> > >> [root at compute4 ~]# service glusterd status
> >>> >>> > >> glusterd is stopped
> >>> >>> > >> [root at compute4 ~]# chkconfig --list | grep glusterd
> >>> >>> > >> glusterd 0:off 1:off 2:on 3:on 4:on 5:on
> >>> >>> > >> 6:off
> >>> >>> > >> [root at compute4 ~]#
> >>> >>> > >>
> >>> >>> > >> Thanks,
> >>> >>> > >> Punit
> >>> >>> > >>
> >>> >>> > >> On Mon, Nov 24, 2014 at 6:36 PM, Kanagaraj <
> kmayilsa at redhat.com>
> >>> >>> > >> wrote:
> >>> >>> > >>
> >>> >>> > >>> Can you send the corresponding error in vdsm.log from the
> >>> >>> > >>> host?
> >>> >>> > >>>
> >>> >>> > >>> Also check if glusterd service is running.
> >>> >>> > >>>
> >>> >>> > >>> Thanks,
> >>> >>> > >>> Kanagaraj
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>> On 11/24/2014 03:39 PM, Punit Dambiwal wrote:
> >>> >>> > >>>
> >>> >>> > >>> Hi,
> >>> >>> > >>>
> >>> >>> > >>> After reboot my Hypervisior host can not activate again in
> the
> >>> >>> > >>> cluster
> >>> >>> > >>> and failed with the following error :-
> >>> >>> > >>>
> >>> >>> > >>> Gluster command [<UNKNOWN>] failed on server...
> >>> >>> > >>>
> >>> >>> > >>> Engine logs :-
> >>> >>> > >>>
> >>> >>> > >>> 2014-11-24 18:05:28,397 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-64) START,
> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId =
> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 5f251c90
> >>> >>> > >>> 2014-11-24 18:05:30,609 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-64) FINISH,
> >>> >>> > >>> GlusterVolumesListVDSCommand,
> >>> >>> > >>> return:
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity at d95203e0
> },
> >>> >>> > >>> log id: 5f251c90
> >>> >>> > >>> 2014-11-24 18:05:33,768 INFO
> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (ajp--127.0.0.1-8702-8)
> >>> >>> > >>> [287d570d] Lock Acquired to object EngineLock
> [exclusiveLocks=
> >>> >>> > >>> key:
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a value: VDS
> >>> >>> > >>> , sharedLocks= ]
> >>> >>> > >>> 2014-11-24 18:05:33,795 INFO
> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Running
> command:
> >>> >>> > >>> ActivateVdsCommand internal: false. Entities affected : ID:
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDSAction group
> >>> >>> > >>> MANIPULATE_HOST
> >>> >>> > >>> with role type ADMIN
> >>> >>> > >>> 2014-11-24 18:05:33,796 INFO
> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Before
> acquiring
> >>> >>> > >>> lock in
> >>> >>> > >>> order to prevent monitoring for host Compute5 from
> data-center
> >>> >>> > >>> SV_WTC
> >>> >>> > >>> 2014-11-24 18:05:33,797 INFO
> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Lock acquired,
> >>> >>> > >>> from
> >>> >>> > >>> now a
> >>> >>> > >>> monitoring of host will be skipped for host Compute5 from
> >>> >>> > >>> data-center
> >>> >>> > >>> SV_WTC
> >>> >>> > >>> 2014-11-24 18:05:33,817 INFO
> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] START,
> >>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId =
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=Unassigned,
> >>> >>> > >>> nonOperationalReason=NONE, stopSpmFailureLogged=false), log
> id:
> >>> >>> > >>> 1cbc7311
> >>> >>> > >>> 2014-11-24 18:05:33,820 INFO
> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] FINISH,
> >>> >>> > >>> SetVdsStatusVDSCommand, log id: 1cbc7311
> >>> >>> > >>> 2014-11-24 18:05:34,086 INFO
> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Activate finished. Lock
> >>> >>> > >>> released.
> >>> >>> > >>> Monitoring can run now for host Compute5 from data-center
> >>> >>> > >>> SV_WTC
> >>> >>> > >>> 2014-11-24 18:05:34,088 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Correlation ID: 287d570d,
> >>> >>> > >>> Job
> >>> >>> > >>> ID:
> >>> >>> > >>> 5ef8e4d6-b2bc-469e-8e81-7ef74b2a001a, Call Stack: null,
> Custom
> >>> >>> > >>> Event ID:
> >>> >>> > >>> -1, Message: Host Compute5 was activated by admin.
> >>> >>> > >>> 2014-11-24 18:05:34,090 INFO
> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Lock freed to object
> >>> >>> > >>> EngineLock
> >>> >>> > >>> [exclusiveLocks= key: 0bf6b00f-7947-4411-b55a-cc5eea2b381a
> >>> >>> > >>> value:
> >>> >>> > >>> VDS
> >>> >>> > >>> , sharedLocks= ]
> >>> >>> > >>> 2014-11-24 18:05:35,792 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] START,
> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId =
> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 48a0c832
> >>> >>> > >>> 2014-11-24 18:05:37,064 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) START,
> >>> >>> > >>> GetHardwareInfoVDSCommand(HostName = Compute5, HostId =
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a,
> >>> >>> > >>> vds=Host[Compute5,0bf6b00f-7947-4411-b55a-cc5eea2b381a]), log
> >>> >>> > >>> id:
> >>> >>> > >>> 6d560cc2
> >>> >>> > >>> 2014-11-24 18:05:37,074 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) FINISH,
> >>> >>> > >>> GetHardwareInfoVDSCommand, log
> >>> >>> > >>> id: 6d560cc2
> >>> >>> > >>> 2014-11-24 18:05:37,093 WARN
> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsManager]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) Host Compute5 is running
> >>> >>> > >>> with
> >>> >>> > >>> disabled
> >>> >>> > >>> SELinux.
> >>> >>> > >>> 2014-11-24 18:05:37,127 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] Running
> command:
> >>> >>> > >>> HandleVdsCpuFlagsOrClusterChangedCommand internal: true.
> >>> >>> > >>> Entities
> >>> >>> > >>> affected
> >>> >>> > >>> : ID: 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
> >>> >>> > >>> 2014-11-24 18:05:37,147 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] START,
> >>> >>> > >>> GlusterServersListVDSCommand(HostName = Compute5, HostId =
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a), log id: 4faed87
> >>> >>> > >>> 2014-11-24 18:05:37,164 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] FINISH,
> >>> >>> > >>> GlusterServersListVDSCommand, log id: 4faed87
> >>> >>> > >>> 2014-11-24 18:05:37,189 INFO
> >>> >>> > >>> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Running
> command:
> >>> >>> > >>> SetNonOperationalVdsCommand internal: true. Entities
> affected :
> >>> >>> > >>> ID:
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
> >>> >>> > >>> 2014-11-24 18:05:37,206 INFO
> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] START,
> >>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId =
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=NonOperational,
> >>> >>> > >>> nonOperationalReason=GLUSTER_COMMAND_FAILED,
> >>> >>> > >>> stopSpmFailureLogged=false),
> >>> >>> > >>> log id: fed5617
> >>> >>> > >>> 2014-11-24 18:05:37,209 INFO
> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] FINISH,
> >>> >>> > >>> SetVdsStatusVDSCommand, log id: fed5617
> >>> >>> > >>> 2014-11-24 18:05:37,223 ERROR
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID:
> >>> >>> > >>> 4a84c4e5,
> >>> >>> > >>> Job
> >>> >>> > >>> ID: 4bfd4a6d-c3ef-468f-a40e-a3a6ca13011b, Call Stack: null,
> >>> >>> > >>> Custom
> >>> >>> > >>> Event
> >>> >>> > >>> ID: -1, Message: Gluster command [<UNKNOWN>] failed on server
> >>> >>> > >>> Compute5.
> >>> >>> > >>> 2014-11-24 18:05:37,243 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID:
> >>> >>> > >>> null,
> >>> >>> > >>> Call
> >>> >>> > >>> Stack: null, Custom Event ID: -1, Message: Status of host
> >>> >>> > >>> Compute5
> >>> >>> > >>> was
> >>> >>> > >>> set
> >>> >>> > >>> to NonOperational.
> >>> >>> > >>> 2014-11-24 18:05:37,272 INFO
> >>> >>> > >>> [org.ovirt.engine.core.bll.HandleVdsVersionCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Running command:
> >>> >>> > >>> HandleVdsVersionCommand internal: true. Entities affected :
> >>> >>> > >>> ID:
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
> >>> >>> > >>> 2014-11-24 18:05:37,274 INFO
> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Host
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a : Compute5 is already in
> >>> >>> > >>> NonOperational status for reason GLUSTER_COMMAND_FAILED.
> >>> >>> > >>> SetNonOperationalVds command is skipped.
> >>> >>> > >>> 2014-11-24 18:05:38,065 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] FINISH,
> >>> >>> > >>> GlusterVolumesListVDSCommand, return:
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity at 4e72a1b1
> },
> >>> >>> > >>> log id: 48a0c832
> >>> >>> > >>> 2014-11-24 18:05:43,243 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-35) START,
> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId =
> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 3ce13ebc
> >>> >>> > >>> ^C
> >>> >>> > >>> [root at ccr01 ~]#
> >>> >>> > >>>
> >>> >>> > >>> Thanks,
> >>> >>> > >>> Punit
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>> _______________________________________________
> >>> >>> > >>> Users mailing
> >>> >>> > >>>
> >>> >>> > >>> listUsers at ovirt.orghttp://
> lists.ovirt.org/mailman/listinfo/users
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >
> >>> >>> > >
> >>> >>> >
> >>> >>
> >>> >>
> >>> >
> >>> >
> >>> > _______________________________________________
> >>> > Gluster-users mailing list
> >>> > Gluster-users at gluster.org
> >>> > http://supercolony.gluster.org/mailman/listinfo/gluster-users
> >>
> >>
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141202/08fd3c76/attachment-0001.html>
More information about the Users
mailing list