[ovirt-users] oVirt power management issue
Eli Mesika
emesika at redhat.com
Wed Dec 10 20:28:22 UTC 2014
----- Original Message -----
> From: "Wout Peeters" <wout at unix-solutions.be>
> To: "Eli Mesika" <emesika at redhat.com>
> Cc: users at ovirt.org
> Sent: Wednesday, December 10, 2014 2:53:33 PM
> Subject: Re: [ovirt-users] oVirt power management issue
>
>
> Hi Eli,
>
>
> When we enter the following data into the webGUI and press Test:
>
> Address => [ip-address]
> User Name => apc
> Password => [password]
> Type => apc
> SSH Port => 22
> Slot => 1
> Options => [empty]
> Secure => [box checked]
>
>
> It shows up in the vdsm.log as follows:
>
> addr=[ip-address],port=,agent=apc,user=[user],passwd=XXXX,action=status,secure=False,options=,policy=None
>
>
> The 'port=', 'secure=' and 'options=' fields seem to remain unchanged,
> regardless of our input.
Hi
Which APC version is used ???
I am getting to the conclusion that I must debug that in order to get an idea what is going on ....
>
>
> Kind Regards,
>
> Wout
>
>
> ----- Oorspronkelijk bericht -----
> Van: "Eli Mesika" <emesika at redhat.com>
> Aan: "Wout Peeters" <wout at unix-solutions.be>
> Cc: users at ovirt.org
> Verzonden: Woensdag 10 december 2014 12:54:56
> Onderwerp: Re: [ovirt-users] oVirt power management issue
>
>
>
> ----- Original Message -----
> > From: "Wout Peeters" <wout at unix-solutions.be>
> > To: "Eli Mesika" <emesika at redhat.com>
> > Cc: users at ovirt.org
> > Sent: Tuesday, December 9, 2014 2:59:41 PM
> > Subject: Re: [ovirt-users] oVirt power management issue
> >
> > Hi Eli,
> >
> >
> > The compatibility version of the cluster in which the proxy host resides is
> > 3.5 .
>
> Hi
> Looking again in your VDSM log is see this
>
> fenceNode(addr=***.***.***.***,port=,agent=apc,user=apc,passwd=XXXX,action=status,secure=False,options=,policy=None)
>
> But when you invoked it directly you had wrote :
>
> fence_apc -a ***.***.***.*** -l apc -p ****** -o status -n 1 -x
>
> So, this required a secured connection while you sent ,secure=False from UI
> Can you please check that the "secure" checkbox is checked in the UI for this
> PM agents and retry ?
>
> >
> >
> > Kind regards,
> >
> > Wout
> >
> > ----- Oorspronkelijk bericht -----
> > Van: "Eli Mesika" <emesika at redhat.com>
> > Aan: "Wout Peeters" <wout at unix-solutions.be>
> > Cc: users at ovirt.org
> > Verzonden: Maandag 8 december 2014 22:06:23
> > Onderwerp: Re: [ovirt-users] oVirt power management issue
> >
> >
> >
> > ----- Original Message -----
> > > From: "Wout Peeters" <wout at unix-solutions.be>
> > > To: emesika at redhat.com
> > > Cc: users at ovirt.org
> > > Sent: Monday, December 8, 2014 12:01:10 PM
> > > Subject: Fwd: [ovirt-users] oVirt power management issue
> > >
> > >
> > > Hi Eli,
> > >
> > > Thanks for the response. Attached are engine.log and vdsm.log from the
> > > host
> > > serving as a proxy. Our CPUs are Intel Nehalem-based. We encounter the
> > > same
> > > problem using apc_snmp. This is the output of the rpm-commands:
> > >
> > > rpm -qa | grep vdsm
> > >
> > > vdsm-yajsonrpc-4.16.7-1.gitdb83943.el7.noarch
> > > vdsm-4.16.7-1.gitdb83943.el7.x86_64
> > > vdsm-xmlrpc-4.16.7-1.gitdb83943.el7.noarch
> > > vdsm-python-zombiereaper-4.16.7-1.gitdb83943.el7.noarch
> > > vdsm-jsonrpc-4.16.7-1.gitdb83943.el7.noarch
> > > vdsm-cli-4.16.7-1.gitdb83943.el7.noarch
> > > vdsm-python-4.16.7-1.gitdb83943.el7.noarch
> > >
> > >
> > > rpm -qa | grep fence-agents
> > >
> > > fence-agents-hpblade-4.0.2-21.el7.x86_64
> > > fence-agents-cisco-ucs-4.0.2-21.el7.x86_64
> > > fence-agents-eaton-snmp-4.0.2-21.el7.x86_64
> > > fence-agents-apc-4.0.2-21.el7.x86_64
> > > fence-agents-rsb-4.0.2-21.el7.x86_64
> > > fence-agents-ilo-mp-4.0.2-21.el7.x86_64
> > > fence-agents-ifmib-4.0.2-21.el7.x86_64
> > > fence-agents-cisco-mds-4.0.2-21.el7.x86_64
> > > fence-agents-all-4.0.2-21.el7.x86_64
> > > fence-agents-common-4.0.2-21.el7.x86_64
> > > fence-agents-rhevm-4.0.2-21.el7.x86_64
> > > fence-agents-eps-4.0.2-21.el7.x86_64
> > > fence-agents-bladecenter-4.0.2-21.el7.x86_64
> > > fence-agents-intelmodular-4.0.2-21.el7.x86_64
> > > fence-agents-apc-snmp-4.0.2-21.el7.x86_64
> > > fence-agents-ilo2-4.0.2-21.el7.x86_64
> > > fence-agents-ipmilan-4.0.2-21.el7.x86_64
> > > fence-agents-scsi-4.0.2-21.el7.x86_64
> > > fence-agents-brocade-4.0.2-21.el7.x86_64
> > > fence-agents-wti-4.0.2-21.el7.x86_64
> > > fence-agents-kdump-4.0.2-21.el7.x86_64
> > > fence-agents-ibmblade-4.0.2-21.el7.x86_64
> > > fence-agents-ipdu-4.0.2-21.el7.x86_64
> > > fence-agents-vmware-soap-4.0.2-21.el7.x86_64
> > > fence-agents-drac5-4.0.2-21.el7.x86_64
> > >
> > >
> > > Kind regards,
> > >
> > > Wout
> >
> > Have seen few resolved bugs on that , can you please let us know what is
> > the
> > cluster level version in which the proxy host resides ?
> >
> >
> > >
> > >
> > > ----- Oorspronkelijk bericht -----
> > > Van: "Eli Mesika" <emesika at redhat.com>
> > > Aan: "Wout Peeters" <wout at unix-solutions.be>
> > > Cc: users at ovirt.org
> > > Verzonden: Maandag 8 december 2014 00:17:13
> > > Onderwerp: Re: [ovirt-users] oVirt power management issue
> > >
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Eli Mesika" <emesika at redhat.com>
> > > > To: "Wout Peeters" <wout at unix-solutions.be>
> > > > Cc: users at ovirt.org
> > > > Sent: Monday, December 8, 2014 1:14:54 AM
> > > > Subject: Re: [ovirt-users] oVirt power management issue
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Wout Peeters" <wout at unix-solutions.be>
> > > > > To: users at ovirt.org
> > > > > Sent: Friday, December 5, 2014 12:50:24 PM
> > > > > Subject: [ovirt-users] oVirt power management issue
> > > > >
> > > > > Hi,
> > > > >
> > > > > We're trying to set up an oVirt configuration with an
> > > > > oVirt-controller
> > > > > (CentOS 6), iSCSI-storage (Dell MD3200i) and 3 vm-hosts (CentOS 7)
> > > > > powered
> > > > > by 2 APC PDUs. Testing the Power Management settings in the web GUI,
> > > > > we
> > > > > get
> > > > > the following message: "Test Succeeded, unknown." The oVirt engine
> > > > > log
> > > > > outputs the following:
> > > > >
> > > > > 2014-12-05 11:23:00,872 INFO
> > > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > > > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null,
> > > > > Custom
> > > > > Event
> > > > > ID: -1, Message: Host vm-02 from data center XXXX was chosen as a
> > > > > proxy
> > > > > to
> > > > > execute Status command on Host vm-03.
> > > > > 2014-12-05 11:23:00,879 INFO
> > > > > [org.ovirt.engine.core.bll.FenceExecutor]
> > > > > (ajp--127.0.0.1-8702-7) Using Host vm-02 from data center XXXX as
> > > > > proxy
> > > > > to
> > > > > execute Status command on Host
> > > > > 2014-12-05 11:23:00,904 INFO
> > > > > [org.ovirt.engine.core.bll.FenceExecutor]
> > > > > (ajp--127.0.0.1-8702-7) Executing <Status> Power Management command,
> > > > > Proxy
> > > > > Host:vm-02, Agent:apc, Target Host:, Management IP:***.***.***.***,
> > > > > User:apc, Options:, Fencing policy:null
> > > > > 2014-12-05 11:23:00,930 INFO
> > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
> > > > > (ajp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName = vm-02,
> > > > > HostId
> > > > > =
> > > > > 071554fc-eed2-4e8f-b6bc-041248d0eaa5, targetVdsId =
> > > > > 67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action = Status, ip =
> > > > > ***.***.***.***,
> > > > > port = , type = apc, user = apc, password = ******, options = '',
> > > > > policy
> > > > > =
> > > > > 'null'), log id: 2803522
> > > > > 2014-12-05 11:23:01,137 WARN
> > > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > > > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null,
> > > > > Custom
> > > > > Event
> > > > > ID: -1, Message: Power Management test failed for Host vm-03.Done
> > > > > 2014-12-05 11:23:01,138 INFO
> > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
> > > > > (ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test
> > > > > Succeeded,
> > > > > unknown, log id: 2803522
> > > > > 2014-12-05 11:23:01,139 WARN
> > > > > [org.ovirt.engine.core.bll.FenceExecutor]
> > > > > (ajp--127.0.0.1-8702-7) Fencing operation failed with proxy host
> > > > > 071554fc-eed2-4e8f-b6bc-041248d0eaa5, trying another proxy...
> > > > > 2014-12-05 11:23:01,241 INFO
> > > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > > > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null,
> > > > > Custom
> > > > > Event
> > > > > ID: -1, Message: Host vm-01 from data center XXXX was chosen as a
> > > > > proxy
> > > > > to
> > > > > execute Status command on Host vm-03.
> > > > > 2014-12-05 11:23:01,244 INFO
> > > > > [org.ovirt.engine.core.bll.FenceExecutor]
> > > > > (ajp--127.0.0.1-8702-7) Using Host vm-01 from data center XXXX as
> > > > > proxy
> > > > > to
> > > > > execute Status command on Host
> > > > > 2014-12-05 11:23:01,246 INFO
> > > > > [org.ovirt.engine.core.bll.FenceExecutor]
> > > > > (ajp--127.0.0.1-8702-7) Executing <Status> Power Management command,
> > > > > Proxy
> > > > > Host:vm-01, Agent:apc, Target Host:, Management IP:***.***.***.***,
> > > > > User:apc, Options:, Fencing policy:null
> > > > > 2014-12-05 11:23:01,273 INFO
> > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
> > > > > (ajp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName = vm-01,
> > > > > HostId
> > > > > =
> > > > > c50eb9bf-5294-4d46-813d-7adfcb41d71d, targetVdsId =
> > > > > 67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action = Status, ip =
> > > > > ***.***.***.***,
> > > > > port = , type = apc, user = apc, password = ******, options = '',
> > > > > policy
> > > > > =
> > > > > 'null'), log id: 2b00de15
> > > > > 2014-12-05 11:23:01,449 WARN
> > > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > > > > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null,
> > > > > Custom
> > > > > Event
> > > > > ID: -1, Message: Power Management test failed for Host vm-03.Done
> > > > > 2014-12-05 11:23:01,451 INFO
> > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
> > > > > (ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test
> > > > > Succeeded,
> > > > > unknown, log id: 2b00de15
> > > > >
> > > > > This is the vdsm.log output:
> > > > >
> > > > > JsonRpc (StompReactor)::DEBUG::2014-12-05
> > > > > 11:34:05,065::stompReactor::98::Broker.StompAdapter::(handle_frame)
> > > > > Handling
> > > > > message <StompFrame command='SEND'>
> > > > > JsonRpcServer::DEBUG::2014-12-05
> > > > > 11:34:05,067::__init__::504::jsonrpc.JsonRpcServer::(serve_requests)
> > > > > Waiting
> > > > > for request
> > > > > Thread-24996::DEBUG::2014-12-05
> > > > > 11:34:05,069::API::1188::vds::(fenceNode)
> > > > > fenceNode(addr=***.***.***.***,port=,agent=apc,user=apc,passwd=XXXX,action=status,secure=False,options=,policy=None)
> > > > > Thread-24996::DEBUG::2014-12-05
> > > > > 11:34:05,069::utils::738::root::(execCmd)
> > > > > /usr/sbin/fence_apc (cwd None)
> > > > > Thread-24996::DEBUG::2014-12-05
> > > > > 11:34:05,131::utils::758::root::(execCmd)
> > > > > FAILED: <err> = "Failed: You have to enter plug number or machine
> > > > > identification\nPlease use '-h' for usage\n"; <rc> = 1
> > > > > Thread-24996::DEBUG::2014-12-05 11:34:05,131::API::1143::vds::(fence)
> > > > > rc
> > > > > 1
> > > > > inp agent=fence_apc
> > > > > ipaddr=***.***.***.***
> > > > > login=apc
> > > > > action=status
> > > > > passwd=XXXX
> > > > > out [] err ['Failed: You have to enter plug number or machine
> > > > > identification', "Please use '-h' for usage"]
> > > > >
> > > > > The 'port' and 'options' fields show up as empty, even if we enter
> > > > > '22'
> > > > > or
> > > > > 'port=22'. We did enter the slot number as well.
> > > > >
> > > > > Entering the fence_apc command manually, we get:
> > > > >
> > > > > fence_apc -a ***.***.***.*** -l apc -p ****** -o status -n 1 -x
> > > > > Status: ON
> > > > >
> > > > > Anyone have an idea what could be the problem?
> > > >
> > > > Hi, first please attach a full engine log and vdsm.log on the machine
> > > > that
> > > > served as a proxy for this operation
> > > > Please also attach the result of the following on the machine that
> > > > served
> > > > as
> > > > a proxy for this operation
> > > >
> > > > rpm -qa | grep vdsm
> > > > rpm -qa | grep fence-agents
> > > >
> > > > Is that a PowerPC machine ???
> > >
> > > also, please try to use the apc_snmp instead of apc and see if that
> > > resolved
> > > the problem
> > >
> > > >
> > > > Thanks
> > > > Eli Mesika
> > > >
> > > >
> > > >
> > > >
> > > > >
> > > > >
> > > > > Thanks for your time and kind regards,
> > > > >
> > > > > Wout
> > > > >
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users at ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > >
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users at ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > >
> >
>
More information about the Users
mailing list