[ovirt-users] bash: ./autogen.sh: No such file or directory

Yeela Kaplan ykaplan at redhat.com
Mon Dec 15 16:21:17 UTC 2014


You need the same packages just for EL7

----- Original Message -----
> From: "Ilan Hirsfeld" <ilan.hirsfeld at gmail.com>
> To: "Yeela Kaplan" <ykaplan at redhat.com>
> Cc: "Yedidyah Bar David" <didi at redhat.com>, "users" <users at ovirt.org>
> Sent: Monday, December 15, 2014 6:00:47 PM
> Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or directory
> 
> Are you sure???
> Because in instruction is written:
> "Fedora and Red Hat *Enterprise Linux 6 *users must verify the following
> packages are installed before attempting to build:"
> 
> As far as I understand I EL7 not EL6. if you still think I have to do the
> requested command line so should I have to do the previous command lines of
> EL6 such as:
> 
> yum install
> http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
> yum install
> http://danken.fedorapeople.org/python-pep8-1.4.5-2.el6.noarch.rpm
> Am I wrong?
> 
> Regards,
> Ilan.
> 
> On Mon, Dec 15, 2014 at 5:52 PM, Yeela Kaplan <ykaplan at redhat.com> wrote:
> >
> > yum install make autoconf automake pyflakes logrotate gcc python-pep8
> > libvirt-python python-devel \
> >  python-nose rpm-build sanlock-python genisoimage python-ordereddict
> > python-pthreading libselinux-python\
> >  python-ethtool m2crypto python-dmidecode python-netaddr python-inotify
> > python-argparse git \
> >  python-cpopen bridge-utils libguestfs-tools-c pyparted openssl libnl3
> > libtool gettext-devel python-ioprocess \
> >  policycoreutils-python python-simplejson
> >
> > ----- Original Message -----
> > > From: "Ilan Hirsfeld" <ilan.hirsfeld at gmail.com>
> > > To: "Yedidyah Bar David" <didi at redhat.com>
> > > Cc: "Yeela Kaplan" <ykaplan at redhat.com>
> > > Sent: Monday, December 15, 2014 5:39:13 PM
> > > Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or directory
> > >
> > > [root at localhost Desktop]# pwd
> > > /home/bih016/Desktop
> > > [root at localhost Desktop]# cd vdsm
> > > [root at localhost vdsm]# ./autogen.sh --system
> > > ./autogen.sh: line 3: autoreconf: command not found
> > > Running ./configure with --prefix=/usr --sysconfdir=/etc
> > > --localstatedir=/var --libdir=/usr/lib64
> > > ./autogen.sh: line 26: ./configure: No such file or directory
> > > Regards,
> > > Ilan.
> > >
> > > On Mon, Dec 15, 2014 at 5:35 PM, Yedidyah Bar David <didi at redhat.com>
> > wrote:
> > > >
> > > > ----- Original Message -----
> > > > > From: "Ilan Hirsfeld" <ilan.hirsfeld at gmail.com>
> > > > > To: "Yeela Kaplan" <ykaplan at redhat.com>, didi at redhat.com
> > > > > Sent: Monday, December 15, 2014 5:31:12 PM
> > > > > Subject: Re: [ovirt-users] bash: ./autogen.sh: No such file or
> > directory
> > > > >
> > > > > On Mon, Dec 15, 2014 at 5:29 PM, Ilan Hirsfeld <
> > ilan.hirsfeld at gmail.com>
> > > > > wrote:
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > The OS is:
> > > > > > [root at localhost Desktop]# cat /etc/redhat-release
> > > > > > CentOS Linux release 7.0.1406 (Core)
> > > > > > [root at localhost Desktop]# uname -r
> > > > > > 3.10.0-123.13.1.el7.x86_64
> > > > > > [root at localhost Desktop]# rpm -qa | grep release
> > > > > > ovirt-release35-001-0.5.rc2.noarch
> > > > > > centos-release-7-0.1406.el7.centos.2.5.x86_64
> > > > > >
> > > > > > [root at localhost Desktop]# pwd
> > > > > > /home/bih016/Desktop
> > > > > >
> > > > > > I follow the instructions on the site
> > > > http://www.ovirt.org/Vdsm_Developers
> > > > > > :
> > > > > >
> > > > > > *
> > http://www.ovirt.org/Vdsm_Developers#Installing_the_required_packages
> > > > > > <
> > http://www.ovirt.org/Vdsm_Developers#Installing_the_required_packages
> > > > >*
> > > > > >
> > > > > > 1. yum install
> > > > > >
> > http://resources.ovirt.org/releases/ovirt-release/ovirt-release35.rpm
> > > > > >
> > > > > > 2. rpm -q wget 2> /dev/null || yum install wget
> > > > > > wget -O /etc/yum.repos.d/glusterfs-epel.repo
> > > > > >
> > > >
> > http://download.gluster.org/pub/gluster/glusterfs/LATEST/EPEL.repo/glusterfs-epel.repo
> > > > > >
> > > > > > *http://www.ovirt.org/Vdsm_Developers#Getting_the_source
> > > > > > <http://www.ovirt.org/Vdsm_Developers#Getting_the_source>:*
> > > > > > git clone http://gerrit.ovirt.org/p/vdsm.git
> > > > > >
> > > > > > *http://www.ovirt.org/Vdsm_Developers#Building_a_VDSM_RPM
> > > > > > <http://www.ovirt.org/Vdsm_Developers#Building_a_VDSM_RPM>:*
> > > > > >  [root at localhost Desktop]# ./autogen.sh --system
> > > > > > bash: ./autogen.sh: No such file or directory
> > > > > >
> > > > > > Regards,
> > > > > > Ilan.
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Mon, Dec 15, 2014 at 5:07 PM, Yeela Kaplan <ykaplan at redhat.com>
> > > > wrote:
> > > > > >>
> > > > > >> what is the directory you're running it from (pwd)?
> > > > > >> You should be under vdsm.
> > > >
> > > > So you should follow Yeela's advice.
> > > >
> > > > > >> Try listing the files and see if the script autogen.sh is there.
> > > > > >>
> > > > > >> ----- Original Message -----
> > > > > >> > From: "Ilan Hirsfeld" <ilan.hirsfeld at gmail.com>
> > > > > >> > To: "users" <users at ovirt.org>
> > > > > >> > Sent: Monday, December 15, 2014 4:54:52 PM
> > > > > >> > Subject: [ovirt-users] bash: ./autogen.sh: No such file or
> > directory
> > > > > >> >
> > > > > >> > Hi,
> > > > > >> > I'm trying to do a Building a VDSM RPM and in command line I
> > type
> > > > the
> > > > > >> > following:
> > > > > >> > ./autogen.sh --system
> > > > > >> > bash: ./autogen.sh: No such file or directory
> > > > > >> > Can anybody help what was wrong?
> > > > > >> > Any help will be blessed.
> > > > > >> > Regards,
> > > > > >> > Ilan.
> > > > > >> >
> > > > > >> > _______________________________________________
> > > > > >> > Users mailing list
> > > > > >> > Users at ovirt.org
> > > > > >> > http://lists.ovirt.org/mailman/listinfo/users
> > > > > >> >
> > > > > >>
> > > > > >
> > > > >
> > > >
> > > > --
> > > > Didi
> > > >
> > > >
> > >
> >
> 



More information about the Users mailing list