[ovirt-users] Unable to reinstall hosts after network removal.

Moti Asayag masayag at redhat.com
Tue Dec 30 12:25:02 UTC 2014



----- Original Message -----
> From: "Arman Khalatyan" <arm2arm at gmail.com>
> To: "Moti Asayag" <masayag at redhat.com>
> Cc: "users" <users at ovirt.org>
> Sent: Tuesday, December 30, 2014 2:21:26 PM
> Subject: Re: [ovirt-users] Unable to reinstall hosts after network removal.
> 
> Ok I found the conflict. The ip rule list  does not have any record on IB0
> interface, all other networks are updated correctly but not IB one.
> Probably this is not a good idea to have an ISCSI storage devices with the
> same interface as VM network.
> the network update operation trying to put interface up and down in that
> point all iscsi devices going to IO/failure this stops to update IB
> interface data.
> 
> Maybe one need to put whole cluster to maintenance mode in order to change
> Storage dependent network setup?
> 

Adding Dan and Allon.

> this is the main trouble which prevents to fix/change any network setup on
> IB0 interface.
> tail -f  /var/log/vdsm/vdsm.log
> Traceback (most recent call last):
>   File "/usr/share/vdsm/storage/hsm.py", line 2430, in connectStorageServer
>     conObj.connect()
>   File "/usr/share/vdsm/storage/storageServer.py", line 367, in connect
>     iscsi.addIscsiNode(self._iface, self._target, self._cred)
>   File "/usr/share/vdsm/storage/iscsi.py", line 164, in addIscsiNode
>     iscsiadm.node_login(iface.name, portalStr, target.iqn)
>   File "/usr/share/vdsm/storage/iscsiadm.py", line 295, in node_login
>     raise IscsiNodeError(rc, out, err)
> IscsiNodeError: (8, ['Logging in to [iface: default, target:
> iqn.2003-01.org.linux-iscsi.data01.x8664:sn.f5c9b017e103, portal:
> 10.10.10.31,3260] (multiple)'], ['iscsiadm: Could not login to [iface:
> default, target: iqn.2003-01.org.linux-iscsi.data01.x8664:sn.f5c9b017e103,
> portal: 10.10.10.31,3260].', 'iscsiadm: initiator reported error (8 -
> connection timed out)', 'iscsiadm: Could not log into all portals'])
> 
> PS
> "save network configuration"  is always checked.
> 
> 
> 
> 
> ***********************************************************
> 
> Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für
> Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany
> 
> ***********************************************************
> 
> 
> On Tue, Dec 30, 2014 at 7:05 AM, Moti Asayag <masayag at redhat.com> wrote:
> 
> >
> >
> > ----- Original Message -----
> > > From: "Arman Khalatyan" <arm2arm at gmail.com>
> > > To: "Moti Asayag" <masayag at redhat.com>
> > > Cc: "users" <users at ovirt.org>
> > > Sent: Monday, December 29, 2014 3:59:46 PM
> > > Subject: Re: [ovirt-users] Unable to reinstall hosts after network
> > removal.
> > >
> > > My setup  has 3 networks: 1xIB,1x10Gbit+1Gbit for ovirt-management.
> > > The ovirt network does not have any trouble, it is always there.
> > > I was trying to rename or remove my IB network which was used for VM
> > > migrations.
> > > I was using web-GUI, which was removing IB0 network w/o problem. After
> > > removal the hosts where ok.
> >
> > Have you checked the option of "save network configuration" in the setup
> > networks
> > dialog (iirc should have been checked by default) ?
> >
> > Could you also attach the /var/log/ovirt-engine/engine.log from the engine
> > server
> > and /var/log/vdsm/vdsm.log and /var/log/vdsm/supervdsm.log from the node so
> > we can see which request was sent to vdsm and its result ?
> >
> > > Then I put them to maintenance mode. To refresh
> > > iptables rules I did reinstall. then reinstall was failing with message
> > > that IB0 not attached to any interface. But IB0 interface is not possible
> > > to attach it is already deleted and not visible in any network dialog.
> > > After creating interface with the same name everything is online now.
> > > My current interface list is following:
> > >  virsh -r net-list
> > > Name                 State      Autostart     Persistent
> > > --------------------------------------------------
> > > ;vdsmdummy;          active     no            no
> > > vdsm-cls10G          active     yes           yes
> > > vdsm-IB0             active     yes           yes
> > > vdsm-ovirtmgmt       active     yes           yes
> > >
> > > On this host the IB0 is not atached to any interface, I wondered, if it
> > > should show up  in the net list?
> > >
> > > I think the GUI does not rename/remove the interface from the DB. Some
> > > constrain keeps still IB0 in DB.
> > >
> > >
> > >
> > > ***********************************************************
> > >
> > > Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für
> > > Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany
> > >
> > > ***********************************************************
> > >
> > >
> > > On Sun, Dec 28, 2014 at 10:31 AM, Moti Asayag <masayag at redhat.com>
> > wrote:
> > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Arman Khalatyan" <arm2arm at gmail.com>
> > > > > To: "users" <users at ovirt.org>
> > > > > Sent: Wednesday, December 24, 2014 1:22:43 PM
> > > > > Subject: [ovirt-users] Unable to reinstall hosts after network
> > removal.
> > > > >
> > > > > Hello,
> > > > > I have a little trouble with ovirt 3.5 on CentOS6.6:
> > > > > I was removing all networks from all hosts.
> > > >
> > > > Did you use the setup networks dialog from the UI in order to remove
> > those
> > > > networks ?
> > > > Or have you removed those networks from the host directly (where you
> > > > should used the:
> > > > 1. virsh net-destroy 'the-network-name'
> > > > 2. virsh net-undefine 'the-network-name'
> > > > )
> > > >
> > > > can you report the output of 'virsh -r net-list'  ?
> > > >
> > > > > Then after removing network from data center the hosts went to
> > unusable.
> > > >
> > > > What was the host's status prior to removing its networks ? Was it up ?
> > > >
> > > > > Every time after reinstall the host claims that the network is not
> > > > > configured, but it s already removed from network tab in DC.
> > > >
> > > > What is the missing network name ? Is it 'ovirtmgmt' ?
> > > >
> > > > > Where from it gets the old configuration? the old interfaces also
> > > > restored
> > > > > every time on the reinstalled hosts.
> > > >
> > > > The hosts via vdsm reports their network configuration via the
> > > > 'getCapabilities' verb
> > > > of vdsm. You can try running it on the host:
> > > >
> > > > vdsClient -s 0 getVdsCaps
> > > >
> > > > and examine the nics / neworks / bridges / vlans / bonds elements.
> > > >
> > > > > Which DB table is in charge of dc-networks?
> > > > >
> > > >
> > > > The retrieved information from vdsm is reported to 'vds_interace'
> > table.
> > > > The dc networks are stored in 'networks' table and networks attached to
> > > > clusters are stored in network_cluster table.
> > > >
> > > > I wouldn't recommend on deleting entries from the tables directly.
> > There
> > > > are
> > > > certain constraints which shouldn't be violated, i.e. the management
> > > > network
> > > > 'ovirtmgnt' is blocked for removal from the engine.
> > > >
> > > > > Thanks,
> > > > > Arman.
> > > > >
> > > > >
> > > > > ***********************************************************
> > > > > Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für
> > > > Astrophysik
> > > > > Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany
> > > > > ***********************************************************
> > > > >
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users at ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > >
> > > >
> > >
> >
> 



More information about the Users mailing list