[Users] SPICE behind NAT

[Andrew Lau]

On Sat, Feb 8, 2014 at 9:11 AM, Alan Murrell <lists at murrell.ca> wrote:

> Hi Andrew,
>
> Thanks for the reply.
>
>
> Quoting "Andrew Lau" <andrew at andrewklau.com>:
>
>  Just install squid proxy and port forward the 3128 port through your
>> firewall you should be all good.
>>
>
> Is squid installed on your oVirt box or is it on your firewall? Or did ypu
> srtup a seperate box ad the proxy? What you post above suggests you
> installed it in the oVirt machine?
>
>
Yup, I install squid on the oVirt engine as it was easier to setup and
configure. No point setting up a dedicated box just for the spice proxy
unless you need some strict policies.



>
>  Here's a quick snippet from my notes:
>>
> [snip]


btw the 172.16.0/24 addresses are the oVirt hosts.



>
>
>  engine-config -s SpiceProxyDefault=http://public_ip_address:3128/
>>
>
> Ah, so the IP I put is the *public* IP on the firewall (or at least the
> one I am connecting to), and not the private IP of the machine Squid is
> installed on?


Yup, this is the public IP address on the firewall.



>
>
> -Alan
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140208/05c608ba/attachment-0001.html>