[Users] VM not starting up

[Nauman Abbas]

Also I believe these lines right before what I pasted with Fpaste link
would be relevant.

Thread-622::DEBUG::2013-12-31
05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown
libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during startup
handshake: Input/output error
Thread-622::DEBUG::2013-12-31
05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm)
vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released


On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas <nauman.abbas at seecs.edu.pk>wrote:

> I'm going through the log (which is quite big) and I've found out this
> part which is like 2 seconds after the vmcreate part. Have a look maybe
> this is what you're looking for. It contains the ERROR and Traceback in it.
>
>
> http://ur1.ca/gakhc
>
>
> On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic at redhat.com>wrote:
>
>> It would be helpful to get a bit more information from the logs - after
>> the vmCreate there are several other things that occur before the vm
>> process is actually launched (prepareImage and following that the actual
>> vm's should be visible in the log). Try to search for an error in the vdsm
>> log, and if you cannot find one attach logs containing the vmCreate and the
>> other operations I mentioned.
>>
>> Errors in the vdsm log are usually logged in lines containing ERROR, but
>> sometimes if the error comes from libvirt it may not contain the uppercase
>> ERROR and be logged as libvirtError or something similar.
>>
>> you should also have the qemu log for the vm you are trying to run.
>> usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will
>> give more information regarding the failure
>>
>> Gadi Ickowicz
>>
>> ----- Original Message -----
>> From: "Joop" <jvdwege at xs4all.nl>
>> To: "Nauman Abbas" <nauman.abbas at seecs.edu.pk>
>> Cc: "users at ovirt.org" <Users at ovirt.org>
>> Sent: Tuesday, December 31, 2013 12:51:10 PM
>> Subject: Re: [Users] VM not starting up
>>
>> Nauman Abbas <nauman.abbas at seecs.edu.pk> wrote:
>>
>>
>> I've attached the portions with vmcreate. I found 5 instances of pairs of
>> call vmcreate and return vmcreate. I've separated them with lines. See if
>> that helps.
>>
>>
>> On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic at redhat.com >
>> wrote:
>>
>>
>> Hi,
>>
>> Maybe you can send just the relevant part of the vdsm logs that contain
>> the attempt to launch the vm itself - it should start with vmCreate. Try to
>> find "::call vmCreate with (..." and either find the matching "return
>> vmCreate with"
>> or an maybe there is an ERROR or Traceback in the vdsm log following the
>> vmCreate call.
>>
>> Gadi Ickowicz
>>
>> ----- Original Message -----
>> From: "Nauman Abbas" < nauman.abbas at seecs.edu.pk >
>> To: "Meital Bourvine" < mbourvin at redhat.com >
>> Cc: " users at ovirt.org " < Users at ovirt.org >
>> Sent: Tuesday, December 31, 2013 11:47:12 AM
>> Subject: Re: [Users] VM not starting up
>>
>> Vdsm is running fine. Also checked the clocks. You were right, the Engine
>> clock was 5 hours ahead of Node clock. I've corrected that but still the
>> same issue.
>>
>>
>> On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin at redhat.com> wrote:
>>
>>
>>
>> Are you sure that vdsm is running?
>>
>> The error happened at 2013-12-31 11:32:56,999 (engine.log)
>> but the last line in vdsm.log is from 2013-12-31 07:20:50,807
>>
>> Also make sure that your clocked are synced.
>>
>>
>>
>>
>>
>>
>> From: "Nauman Abbas" < nauman.abbas at seecs.edu.pk >
>> To: "Meital Bourvine" < mbourvin at redhat.com >
>> Cc: " users at ovirt.org " < Users at ovirt.org >
>> Sent: Tuesday, December 31, 2013 9:39:09 AM
>>
>> Subject: Re: [Users] VM not starting up
>>
>> Sending files one by one. Vdsm.log
>>
>>
>> On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin at redhat.com> wrote:
>>
>>
>>
>> Engine log can be found on the engine (while vdsm.log is on the host).
>> The full path is - /var/log/ovirt-engine/engine.log
>>
>> audit.log - /var/log/audit/audit.log
>>
>> About the vdsm log - I don't see any error there, I think that you cut
>> too much from it.
>>
>>
>>
>>
>> From: "Nauman Abbas" < nauman.abbas at seecs.edu.pk >
>> To: "Meital Bourvine" < mbourvin at redhat.com >
>> Cc: " users at ovirt.org " < Users at ovirt.org >
>> Sent: Tuesday, December 31, 2013 8:42:43 AM
>> Subject: Re: [Users] VM not starting up
>>
>>
>> Hello Meital
>>
>> SELinux is off. The cluster doesn't work if SELinux is on, my hosts and
>> storage is showing up as okay but VM is not starting up.
>>
>> I've managed to get vdsm.log but cannot find engine.log and audit.log.
>> Sorry for being a noob, if you can tell me the path to these files I'll
>> send them right away.
>>
>>
>> On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin at redhat.com> wrote:
>>
>>
>>
>> Hi Nauman,
>>
>> Maybe it's a selinux issue?
>> Please try running `setenforce 0` before starting the vm.
>>
>> Also please attach engine.log, vdsm.log, and audit.log
>>
>>
>>
>>
>> From: "Nauman Abbas" < nauman.abbas at seecs.edu.pk >
>> To: " users at ovirt.org " < Users at ovirt.org >
>> Sent: Tuesday, December 31, 2013 7:13:01 AM
>> Subject: [Users] VM not starting up
>>
>>
>> Hello all,
>>
>> First of all thank you for your help, I've finally managed to get my
>> Cluster configured properly but now that I create VMs I'm facing another
>> problem. Whenever I start my VM I get this error.
>>
>> " VM TestVm is down. Exit message: Child quit during startup handshake:
>> Input/output error."
>>
>> I've googled around but haven't found any satisfactory solution. If
>> anyone can help out it would be great.
>>
>> Regards
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>>
>> --
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>>
>>
>>
>> --
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>>
>>
>>
>> --
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>> --
>>
>> Nauman Abbas
>> Assistant System Administrator (LMS),
>> Room No. A-207, SEECS,
>> National University of Sciences & Technology,
>> + 92 321 5359946
>>
>> Paste your logs to fpaste.org or similar and put the url in the mail.
>> Your snippets don‘t contain any errors that i can see.
>>
>> --
>> Sent from my Android tablet with K-9 Mail. Please excuse my brevity.
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
>
> --
>
> Nauman Abbas
> Assistant System Administrator (LMS),
> Room No. A-207, SEECS,
> National University of Sciences & Technology,
> + 92 321 5359946
>



-- 

Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140101/88dcab89/attachment-0001.html>