[Users] Migration Failed
Neil
nwilson123 at gmail.com
Tue Jan 14 07:30:05 UTC 2014
Good morning everyone,
Sorry for the late reply.
Tom: unfortunately selinux is disabled on all the machines involved.
Michal: Attached are the latest logs, I started the migration at
8:43am and it returned an error/failed at 8:52am. The details of the
migration are as follows.
node01 (10.0.2.21) is the destination
node03 (10.0.2.23) is the source
engine01 (10.0.2.31) is the engine
Tux is the VM
Strangely enough the immediate "pop up" error I received in the GUI
previously didn't appear this time and it looked like it might
actually work, however after waiting quite a while it eventually
returned an error in the Tasks as follows...
2014-Jan-14, 09:05 Refresh image list failed for domain(s): bla-iso
(ISO file type). Please check domain activity.
2014-Jan-14, 09:05 Migration failed due to Error: Internal Engine
Error. Trying to migrate to another Host (VM: tux, Source:
node03.blabla.com, Destination: node01.blabla.com).
2014-Jan-14, 08:52 Migration failed due to Error: Internal Engine
Error (VM: tux, Source: node03.blabla.com, Destination:
node01.blabla.com).
and then also received an error in the engine.log which is why I've
attached that as well.
Please shout if you need any further info.
Thank you so much.
Regards.
Neil Wilson.
On Mon, Jan 13, 2014 at 4:07 PM, Tom Brown <tom at ng23.net> wrote:
>
> selinux issue?
>
>
> On 13 January 2014 12:48, Michal Skrivanek <michal.skrivanek at redhat.com>
> wrote:
>>
>>
>> On Jan 13, 2014, at 11:37 , Neil <nwilson123 at gmail.com> wrote:
>>
>> > Good morning everyone,
>> >
>> > Sorry to trouble you again, anyone have any ideas on what to try next?
>>
>> Hi Neil,
>> hm, other than noise I don't really see any failures in migration.
>> Can you attach both src and dst vdsm log with a hint which VM and at what
>> time approx it failed for you?
>> There are errors for one volume reoccuring all the time, but that doesn't
>> look related to the migration
>>
>> Thanks,
>> michal
>>
>> >
>> > Thank you so much,
>> >
>> > Regards.
>> >
>> > Neil Wilson.
>> >
>> > On Fri, Jan 10, 2014 at 8:31 AM, Neil <nwilson123 at gmail.com> wrote:
>> >> Hi Dafna,
>> >>
>> >> Apologies for the late reply, I was out of my office yesterday.
>> >>
>> >> Just to get back to you on your questions.
>> >>
>> >> can you look at the vm dialogue and see what boot devices the vm has?
>> >> Sorry I'm not sure where you want me to get this info from? Inside the
>> >> ovirt GUI or on the VM itself.
>> >> The VM has one 2TB LUN assigned. Then inside the VM this is the fstab
>> >> parameters..
>> >>
>> >> [root at tux ~]# cat /etc/fstab
>> >> /dev/VolGroup00/LogVol00 / ext3 defaults
>> >> 1 0
>> >> /dev/vda1 /boot ext3 defaults 1
>> >> 0
>> >> tmpfs /dev/shm tmpfs defaults
>> >> 0 0
>> >> devpts /dev/pts devpts gid=5,mode=620
>> >> 0 0
>> >> sysfs /sys sysfs defaults
>> >> 0 0
>> >> proc /proc proc defaults
>> >> 0 0
>> >> /dev/VolGroup00/LogVol01 swap swap defaults
>> >> 0 0
>> >> /dev/VolGroup00/LogVol02 /homes xfs
>> >> defaults,usrquota,grpquota 1 0
>> >>
>> >>
>> >> can you write to the vm?
>> >> Yes the machine is fully functioning, it's their main PDC and hosts
>> >> all of their files.
>> >>
>> >>
>> >> can you please dump the vm xml from libvirt? (it's one of the commands
>> >> that you have in virsh)
>> >>
>> >> Below is the xml
>> >>
>> >> <domain type='kvm' id='7'>
>> >> <name>tux</name>
>> >> <uuid>2736197b-6dc3-4155-9a29-9306ca64881d</uuid>
>> >> <memory unit='KiB'>8388608</memory>
>> >> <currentMemory unit='KiB'>8388608</currentMemory>
>> >> <vcpu placement='static'>4</vcpu>
>> >> <cputune>
>> >> <shares>1020</shares>
>> >> </cputune>
>> >> <sysinfo type='smbios'>
>> >> <system>
>> >> <entry name='manufacturer'>oVirt</entry>
>> >> <entry name='product'>oVirt Node</entry>
>> >> <entry name='version'>6-4.el6.centos.10</entry>
>> >> <entry name='serial'>4C4C4544-0038-5310-8050-C6C04F34354A</entry>
>> >> <entry name='uuid'>2736197b-6dc3-4155-9a29-9306ca64881d</entry>
>> >> </system>
>> >> </sysinfo>
>> >> <os>
>> >> <type arch='x86_64' machine='rhel6.4.0'>hvm</type>
>> >> <smbios mode='sysinfo'/>
>> >> </os>
>> >> <features>
>> >> <acpi/>
>> >> </features>
>> >> <cpu mode='custom' match='exact'>
>> >> <model fallback='allow'>Westmere</model>
>> >> <topology sockets='1' cores='4' threads='1'/>
>> >> </cpu>
>> >> <clock offset='variable' adjustment='0' basis='utc'>
>> >> <timer name='rtc' tickpolicy='catchup'/>
>> >> </clock>
>> >> <on_poweroff>destroy</on_poweroff>
>> >> <on_reboot>restart</on_reboot>
>> >> <on_crash>destroy</on_crash>
>> >> <devices>
>> >> <emulator>/usr/libexec/qemu-kvm</emulator>
>> >> <disk type='file' device='cdrom'>
>> >> <driver name='qemu' type='raw'/>
>> >> <source startupPolicy='optional'/>
>> >> <target dev='hdc' bus='ide'/>
>> >> <readonly/>
>> >> <serial></serial>
>> >> <alias name='ide0-1-0'/>
>> >> <address type='drive' controller='0' bus='1' target='0' unit='0'/>
>> >> </disk>
>> >> <disk type='block' device='disk' snapshot='no'>
>> >> <driver name='qemu' type='raw' cache='none' error_policy='stop'
>> >> io='native'/>
>> >> <source
>> >> dev='/rhev/data-center/28adaf38-a4f6-11e1-a859-cb68949043e4/0e6991ae-6238-4c61-96d2-ca8fed35161e/images/fd1a562a-3ba5-4ddb-a643-37912a6ae86f/f747ba2b-98e1-47f5-805b-6bb173bfd6ff'/>
>> >> <target dev='vda' bus='virtio'/>
>> >> <serial>fd1a562a-3ba5-4ddb-a643-37912a6ae86f</serial>
>> >> <boot order='1'/>
>> >> <alias name='virtio-disk0'/>
>> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x05'
>> >> function='0x0'/>
>> >> </disk>
>> >> <controller type='ide' index='0'>
>> >> <alias name='ide0'/>
>> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x01'
>> >> function='0x1'/>
>> >> </controller>
>> >> <controller type='virtio-serial' index='0'>
>> >> <alias name='virtio-serial0'/>
>> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x04'
>> >> function='0x0'/>
>> >> </controller>
>> >> <controller type='usb' index='0'>
>> >> <alias name='usb0'/>
>> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x01'
>> >> function='0x2'/>
>> >> </controller>
>> >> <interface type='bridge'>
>> >> <mac address='00:1a:4a:a8:7a:00'/>
>> >> <source bridge='ovirtmgmt'/>
>> >> <target dev='vnet5'/>
>> >> <model type='virtio'/>
>> >> <filterref filter='vdsm-no-mac-spoofing'/>
>> >> <link state='up'/>
>> >> <alias name='net0'/>
>> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x03'
>> >> function='0x0'/>
>> >> </interface>
>> >> <channel type='unix'>
>> >> <source mode='bind'
>> >> path='/var/lib/libvirt/qemu/channels/tux.com.redhat.rhevm.vdsm'/>
>> >> <target type='virtio' name='com.redhat.rhevm.vdsm'/>
>> >> <alias name='channel0'/>
>> >> <address type='virtio-serial' controller='0' bus='0' port='1'/>
>> >> </channel>
>> >> <channel type='unix'>
>> >> <source mode='bind'
>> >> path='/var/lib/libvirt/qemu/channels/tux.org.qemu.guest_agent.0'/>
>> >> <target type='virtio' name='org.qemu.guest_agent.0'/>
>> >> <alias name='channel1'/>
>> >> <address type='virtio-serial' controller='0' bus='0' port='2'/>
>> >> </channel>
>> >> <channel type='spicevmc'>
>> >> <target type='virtio' name='com.redhat.spice.0'/>
>> >> <alias name='channel2'/>
>> >> <address type='virtio-serial' controller='0' bus='0' port='3'/>
>> >> </channel>
>> >> <input type='mouse' bus='ps2'/>
>> >> <graphics type='spice' port='5912' tlsPort='5913' autoport='yes'
>> >> listen='0' keymap='en-us' passwdValidTo='2013-09-20T07:56:54'
>> >> connected='disconnect'>
>> >> <listen type='address' address='0'/>
>> >> <channel name='main' mode='secure'/>
>> >> <channel name='display' mode='secure'/>
>> >> <channel name='inputs' mode='secure'/>
>> >> <channel name='cursor' mode='secure'/>
>> >> <channel name='playback' mode='secure'/>
>> >> <channel name='record' mode='secure'/>
>> >> <channel name='smartcard' mode='secure'/>
>> >> <channel name='usbredir' mode='secure'/>
>> >> </graphics>
>> >> <video>
>> >> <model type='qxl' ram='65536' vram='65536' heads='1'/>
>> >> <alias name='video0'/>
>> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x02'
>> >> function='0x0'/>
>> >> </video>
>> >> <memballoon model='virtio'>
>> >> <alias name='balloon0'/>
>> >> <address type='pci' domain='0x0000' bus='0x00' slot='0x06'
>> >> function='0x0'/>
>> >> </memballoon>
>> >> </devices>
>> >> <seclabel type='none'/>
>> >> </domain>
>> >>
>> >> Thank you very much for your help.
>> >>
>> >> Regards.
>> >>
>> >> Neil Wilson.
>> >>
>> >>
>> >>
>> >> On Wed, Jan 8, 2014 at 4:55 PM, Dafna Ron <dron at redhat.com> wrote:
>> >>> Hi Neil,
>> >>>
>> >>> the error in the log suggests that the vm is missing a disk...
>> >>> can you look at the vm dialogue and see what boot devices the vm has?
>> >>> can you write to the vm?
>> >>> can you please dump the vm xml from libvirt? (it's one of the commands
>> >>> that
>> >>> you have in virsh)
>> >>>
>> >>> Thanks,
>> >>>
>> >>> Dafna
>> >>>
>> >>>
>> >>>
>> >>> On 01/08/2014 02:42 PM, Neil wrote:
>> >>>>
>> >>>> Hi guys,
>> >>>>
>> >>>> Apologies for the late reply.
>> >>>>
>> >>>> The VM (Tux) was created about 2 years ago, it was converted from a
>> >>>> physical machine using Clonezilla. It's been migrated a number of
>> >>>> times in the past, only now when trying to move it off node03 is it
>> >>>> giving this error.
>> >>>>
>> >>>> I've looked for any attached images/cd's and found none
>> >>>> unfortunately.
>> >>>>
>> >>>> Thank you so much for your assistance so far.
>> >>>>
>> >>>> Regards.
>> >>>>
>> >>>> Neil Wilson.
>> >>>>
>> >>>>
>> >>>>
>> >>>> On Wed, Jan 8, 2014 at 12:23 PM, Dafna Ron <dron at redhat.com> wrote:
>> >>>>>
>> >>>>> Thread-847747::INFO::2014-01-07
>> >>>>> 14:30:32,353::logUtils::44::dispatcher::(wrapper) Run and protect:
>> >>>>> inappropriateDevices(thiefId='63da7faa-f92a-4652-90f2-b6660a4fb7b3')
>> >>>>> Thread-847747::INFO::2014-01-07
>> >>>>> 14:30:32,354::logUtils::47::dispatcher::(wrapper) Run and protect:
>> >>>>> inappropriateDevices, Return response: None
>> >>>>>
>> >>>>> Please check if the vm's were booted with a cd...
>> >>>>>
>> >>>>>
>> >>>>> bject at 0x7fb1f00cbbd0>> log:<logUtils.SimpleLogAdapter instance at
>> >>>>> 0x7fb1f00be7e8> name:hdc networkDev:False path: readonly:True
>> >>>>> reqsize:0
>> >>>>> serial: truesize:0 *type:cdrom* volExtensionChunk:1024
>> >>>>> watermarkLimit:536870912
>> >>>>>
>> >>>>> Traceback (most recent call last):
>> >>>>> File "/usr/share/vdsm/clientIF.py", line 356, in
>> >>>>> teardownVolumePath
>> >>>>> res = self.irs.teardownImage(drive['domainID'],
>> >>>>> File "/usr/share/vdsm/vm.py", line 1386, in __getitem__
>> >>>>> raise KeyError(key)
>> >>>>> KeyError: 'domainID'
>> >>>>> Thread-847747::WARNING::2014-01-07
>> >>>>> 14:30:32,351::clientIF::362::vds::(teardownVolumePath) Drive is not
>> >>>>> a
>> >>>>> vdsm
>> >>>>> image: VOLWM_CHUNK_MB:1024 VOLWM_CHUNK_REPLICATE_MULT:2
>> >>>>> VOLWM_FREE_PCT:50
>> >>>>> _blockDev:True _checkIoTuneCategories:<bound method D
>> >>>>> rive._checkIoTuneCategories of <vm.Drive object at 0x7fb1f00cbc10>>
>> >>>>> _customize:<bound method Drive._customize of <vm.Drive object at
>> >>>>> 0x7fb1f00cbc10>> _deviceXML:<disk device="disk" snapshot="no"
>> >>>>> type="block">
>> >>>>> <driver cache="none" error_policy="stop" io="native"
>> >>>>> name="qemu"
>> >>>>> type="raw"/>
>> >>>>> <source
>> >>>>>
>> >>>>>
>> >>>>> dev="/rhev/data-center/28adaf38-a4f6-11e1-a859-cb68949043e4/0e6991ae-6238-4c61-96d2-ca8fed35161e/images/9f16f896-1da3-4f9a-a305-ac9c4f51a482/e04c6600-abb9-4ebc-a9b3-77b6c536e258"/>
>> >>>>> <target bus="ide" dev="hda"/>
>> >>>>> <serial>9f16f896-1da3-4f9a-a305-ac9c4f51a482</serial>
>> >>>>> <alias name="ide0-0-0"/>
>> >>>>> <address bus="0" controller="0" target="0" type="drive"
>> >>>>> unit="0"/>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> On 01/08/2014 06:28 AM, Neil wrote:
>> >>>>>>
>> >>>>>> Hi Dafna,
>> >>>>>>
>> >>>>>> Thanks for the reply.
>> >>>>>>
>> >>>>>> Attached is the log from the source server (node03).
>> >>>>>>
>> >>>>>> I'll reply to your other questions as soon as I'm back in the
>> >>>>>> office
>> >>>>>> this afternoon, have to run off to a meeting.
>> >>>>>>
>> >>>>>> Regards.
>> >>>>>>
>> >>>>>> Neil Wilson.
>> >>>>>>
>> >>>>>>
>> >>>>>> On Tue, Jan 7, 2014 at 8:13 PM, Dafna Ron <dron at redhat.com> wrote:
>> >>>>>>>
>> >>>>>>> Ok... several things :)
>> >>>>>>>
>> >>>>>>> 1. for migration we need to see vdsm logs from both src and dst.
>> >>>>>>>
>> >>>>>>> 2. Is it possible that the vm has an iso attached? because I see
>> >>>>>>> that
>> >>>>>>> you
>> >>>>>>> are having problems with the iso domain:
>> >>>>>>>
>> >>>>>>> 2014-01-07 14:26:27,714 ERROR
>> >>>>>>> [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand]
>> >>>>>>> (pool-6-thread-48) Domain
>> >>>>>>> e9ab725d-69c1-4a59-b225-b995d095c289:bla-iso
>> >>>>>>> was
>> >>>>>>> reported with error code 358
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> Thread-1165153::DEBUG::2014-01-07
>> >>>>>>> 13:39:42,460::libvirtconnection::108::libvirtconnection::(wrapper)
>> >>>>>>> Unknown
>> >>>>>>> libvirterror: ecode: 42 edom: 10 level: 2 message: Domain not
>> >>>>>>> found: no
>> >>>>>>> domain with matching uuid '63da7faa-f92a-4652-90f2-b6660a4fb7b3'
>> >>>>>>>
>> >>>>>>> hread-19::ERROR::2014-01-07
>> >>>>>>> 13:01:02,621::sdc::143::Storage.StorageDomainCache::(_findDomain)
>> >>>>>>> domain
>> >>>>>>> e9ab725d-69c1-4a59-b225-b995d095c289 not found
>> >>>>>>> Traceback (most recent call last):
>> >>>>>>> File "/usr/share/vdsm/storage/sdc.py", line 141, in _findDomain
>> >>>>>>> dom = findMethod(sdUUID)
>> >>>>>>> File "/usr/share/vdsm/storage/sdc.py", line 171, in
>> >>>>>>> _findUnfetchedDomain
>> >>>>>>> raise se.StorageDomainDoesNotExist(sdUUID)
>> >>>>>>> StorageDomainDoesNotExist: Storage domain does not exist:
>> >>>>>>> (u'e9ab725d-69c1-4a59-b225-b995d095c289',)
>> >>>>>>> Thread-19::ERROR::2014-01-07
>> >>>>>>>
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> 13:01:02,622::domainMonitor::225::Storage.DomainMonitorThread::(_monitorDomain)
>> >>>>>>> Error while collecting domain e9ab725d-69c1-4a59-b225-b995d095c289
>> >>>>>>> monitoring information
>> >>>>>>> Traceback (most recent call last):
>> >>>>>>> File "/usr/share/vdsm/storage/domainMonitor.py", line 190, in
>> >>>>>>> _monitorDomain
>> >>>>>>> self.domain = sdCache.produce(self.sdUUID)
>> >>>>>>> File "/usr/share/vdsm/storage/sdc.py", line 98, in produce
>> >>>>>>> domain.getRealDomain()
>> >>>>>>> File "/usr/share/vdsm/storage/sdc.py", line 52, in
>> >>>>>>> getRealDomain
>> >>>>>>> return self._cache._realProduce(self._sdUUID)
>> >>>>>>> File "/usr/share/vdsm/storage/sdc.py", line 122, in
>> >>>>>>> _realProduce
>> >>>>>>> domain = self._findDomain(sdUUID)
>> >>>>>>> File "/usr/share/vdsm/storage/sdc.py", line 141, in _findDomain
>> >>>>>>> dom = findMethod(sdUUID)
>> >>>>>>> File "/usr/share/vdsm/storage/sdc.py", line 171, in
>> >>>>>>> _findUnfetchedDomain
>> >>>>>>> raise se.StorageDomainDoesNotExist(sdUUID)
>> >>>>>>> StorageDomainDoesNotExist: Storage domain does not exist:
>> >>>>>>> (u'e9ab725d-69c1-4a59-b225-b995d095c289',)
>> >>>>>>> Dummy-29013::DEBUG::2014-01-07
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> 13:01:03,507::storage_mailbox::733::Storage.Misc.excCmd::(_checkForMail)
>> >>>>>>> 'dd
>> >>>>>>>
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> if=/rhev/data-center/28adaf38-a4f6-11e1-a859-cb68949043e4/mastersd/dom_md/inbox
>> >>>>>>> iflag=direct,fullblock count=1 bs=1024000' (cwd N
>> >>>>>>> one)
>> >>>>>>>
>> >>>>>>> 3. The migration fails with libvirt error but we need the trace
>> >>>>>>> from
>> >>>>>>> the
>> >>>>>>> second log:
>> >>>>>>>
>> >>>>>>> Thread-1165153::DEBUG::2014-01-07
>> >>>>>>> 13:39:42,451::sampling::292::vm.Vm::(stop)
>> >>>>>>> vmId=`63da7faa-f92a-4652-90f2-b6660a4fb7b3`::Stop statistics
>> >>>>>>> collection
>> >>>>>>> Thread-1163583::DEBUG::2014-01-07
>> >>>>>>> 13:39:42,452::sampling::323::vm.Vm::(run)
>> >>>>>>> vmId=`63da7faa-f92a-4652-90f2-b6660a4fb7b3`::Stats thread finished
>> >>>>>>> Thread-1165153::DEBUG::2014-01-07
>> >>>>>>> 13:39:42,460::libvirtconnection::108::libvirtconnection::(wrapper)
>> >>>>>>> Unknown
>> >>>>>>> libvirterror: ecode: 42 edom: 10 level: 2 message: Domain not
>> >>>>>>> found: no
>> >>>>>>> domain with matching uuid '63da7faa-f92a-4652-90f2-b6660
>> >>>>>>> a4fb7b3'
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> 4. But I am worried about this and would more info about this
>> >>>>>>> vm...
>> >>>>>>>
>> >>>>>>> Thread-247::ERROR::2014-01-07
>> >>>>>>> 15:35:14,868::sampling::355::vm.Vm::(collect)
>> >>>>>>> vmId=`63da7faa-f92a-4652-90f2-b6660a4fb7b3`::Stats function
>> >>>>>>> failed:
>> >>>>>>> <AdvancedStatsFunction _highWrite at 0x2ce0998>
>> >>>>>>> Traceback (most recent call last):
>> >>>>>>> File "/usr/share/vdsm/sampling.py", line 351, in collect
>> >>>>>>> statsFunction()
>> >>>>>>> File "/usr/share/vdsm/sampling.py", line 226, in __call__
>> >>>>>>> retValue = self._function(*args, **kwargs)
>> >>>>>>> File "/usr/share/vdsm/vm.py", line 509, in _highWrite
>> >>>>>>> if not vmDrive.blockDev or vmDrive.format != 'cow':
>> >>>>>>> AttributeError: 'Drive' object has no attribute 'format'
>> >>>>>>>
>> >>>>>>> How did you create this vm? was it from the UI? was it from a
>> >>>>>>> script?
>> >>>>>>> what
>> >>>>>>> are the parameters you used?
>> >>>>>>>
>> >>>>>>> Thanks,
>> >>>>>>>
>> >>>>>>> Dafna
>> >>>>>>>
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> On 01/07/2014 04:34 PM, Neil wrote:
>> >>>>>>>>
>> >>>>>>>> Hi Elad,
>> >>>>>>>>
>> >>>>>>>> Thanks for assisting me, yes the same condition exists, if I try
>> >>>>>>>> to
>> >>>>>>>> migrate Tux it says "The VM Tux is being migrated".
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> Below are the details requested.
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> [root at node01 ~]# virsh -r list
>> >>>>>>>> Id Name State
>> >>>>>>>> ----------------------------------------------------
>> >>>>>>>> 1 adam running
>> >>>>>>>>
>> >>>>>>>> [root at node01 ~]# pgrep qemu
>> >>>>>>>> 11232
>> >>>>>>>> [root at node01 ~]# vdsClient -s 0 list table
>> >>>>>>>> 63da7faa-f92a-4652-90f2-b6660a4fb7b3 11232 adam
>> >>>>>>>> Up
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> [root at node03 ~]# virsh -r list
>> >>>>>>>> Id Name State
>> >>>>>>>> ----------------------------------------------------
>> >>>>>>>> 7 tux running
>> >>>>>>>>
>> >>>>>>>> [root at node03 ~]# pgrep qemu
>> >>>>>>>> 32333
>> >>>>>>>> [root at node03 ~]# vdsClient -s 0 list table
>> >>>>>>>> 2736197b-6dc3-4155-9a29-9306ca64881d 32333 tux
>> >>>>>>>> Up
>> >>>>>>>>
>> >>>>>>>> Thanks.
>> >>>>>>>>
>> >>>>>>>> Regards.
>> >>>>>>>>
>> >>>>>>>> Neil Wilson.
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> On Tue, Jan 7, 2014 at 4:43 PM, Elad Ben Aharon
>> >>>>>>>> <ebenahar at redhat.com>
>> >>>>>>>> wrote:
>> >>>>>>>>>
>> >>>>>>>>> Is it still in the same condition?
>> >>>>>>>>> If yes, please add the outputs from both hosts for:
>> >>>>>>>>>
>> >>>>>>>>> #virsh -r list
>> >>>>>>>>> #pgrep qemu
>> >>>>>>>>> #vdsClient -s 0 list table (or 'vdsClient 0 list table' if
>> >>>>>>>>> you
>> >>>>>>>>> are
>> >>>>>>>>> working in insecure mode)
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>> Thnaks,
>> >>>>>>>>>
>> >>>>>>>>> Elad Ben Aharon
>> >>>>>>>>> RHEV-QE storage team
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>> ----- Original Message -----
>> >>>>>>>>> From: "Neil" <nwilson123 at gmail.com>
>> >>>>>>>>> To: users at ovirt.org
>> >>>>>>>>> Sent: Tuesday, January 7, 2014 4:21:43 PM
>> >>>>>>>>> Subject: [Users] Migration Failed
>> >>>>>>>>>
>> >>>>>>>>> Hi guys,
>> >>>>>>>>>
>> >>>>>>>>> I've tried to migrate a VM from one host(node03) to
>> >>>>>>>>> another(node01),
>> >>>>>>>>> and it failed to migrate, and the VM(tux) remained on the
>> >>>>>>>>> original
>> >>>>>>>>> host. I've now tried to migrate the same VM again, and it picks
>> >>>>>>>>> up
>> >>>>>>>>> that the previous migration is still in progress and refuses to
>> >>>>>>>>> migrate.
>> >>>>>>>>>
>> >>>>>>>>> I've checked for the KVM process on each of the hosts and the VM
>> >>>>>>>>> is
>> >>>>>>>>> definitely still running on node03 so there doesn't appear to be
>> >>>>>>>>> any
>> >>>>>>>>> chance of the VM trying to run on both hosts (which I've had
>> >>>>>>>>> before
>> >>>>>>>>> which is very scary).
>> >>>>>>>>>
>> >>>>>>>>> These are my versions... and attached are my engine.log and my
>> >>>>>>>>> vdsm.log
>> >>>>>>>>>
>> >>>>>>>>> Centos 6.5
>> >>>>>>>>> ovirt-iso-uploader-3.3.1-1.el6.noarch
>> >>>>>>>>> ovirt-host-deploy-1.1.2-1.el6.noarch
>> >>>>>>>>> ovirt-release-el6-9-1.noarch
>> >>>>>>>>> ovirt-engine-setup-3.3.1-2.el6.noarch
>> >>>>>>>>> ovirt-engine-3.3.1-2.el6.noarch
>> >>>>>>>>> ovirt-host-deploy-java-1.1.2-1.el6.noarch
>> >>>>>>>>> ovirt-image-uploader-3.3.1-1.el6.noarch
>> >>>>>>>>> ovirt-engine-dbscripts-3.3.1-2.el6.noarch
>> >>>>>>>>> ovirt-engine-cli-3.3.0.6-1.el6.noarch
>> >>>>>>>>> ovirt-engine-websocket-proxy-3.3.1-2.el6.noarch
>> >>>>>>>>> ovirt-engine-userportal-3.3.1-2.el6.noarch
>> >>>>>>>>> ovirt-log-collector-3.3.1-1.el6.noarch
>> >>>>>>>>> ovirt-engine-tools-3.3.1-2.el6.noarch
>> >>>>>>>>> ovirt-engine-lib-3.3.1-2.el6.noarch
>> >>>>>>>>> ovirt-engine-webadmin-portal-3.3.1-2.el6.noarch
>> >>>>>>>>> ovirt-engine-backend-3.3.1-2.el6.noarch
>> >>>>>>>>> ovirt-engine-sdk-python-3.3.0.8-1.el6.noarch
>> >>>>>>>>> ovirt-engine-restapi-3.3.1-2.el6.noarch
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>> vdsm-python-4.13.0-11.el6.x86_64
>> >>>>>>>>> vdsm-cli-4.13.0-11.el6.noarch
>> >>>>>>>>> vdsm-xmlrpc-4.13.0-11.el6.noarch
>> >>>>>>>>> vdsm-4.13.0-11.el6.x86_64
>> >>>>>>>>> vdsm-python-cpopen-4.13.0-11.el6.x86_64
>> >>>>>>>>>
>> >>>>>>>>> I've had a few issues with this particular installation in the
>> >>>>>>>>> past,
>> >>>>>>>>> as it's from a very old pre release of ovirt, then upgrading to
>> >>>>>>>>> the
>> >>>>>>>>> dreyou repo, then finally moving to the official Centos ovirt
>> >>>>>>>>> repo.
>> >>>>>>>>>
>> >>>>>>>>> Thanks, any help is greatly appreciated.
>> >>>>>>>>>
>> >>>>>>>>> Regards.
>> >>>>>>>>>
>> >>>>>>>>> Neil Wilson.
>> >>>>>>>>>
>> >>>>>>>>> _______________________________________________
>> >>>>>>>>> Users mailing list
>> >>>>>>>>> Users at ovirt.org
>> >>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>> >>>>>>>>
>> >>>>>>>> _______________________________________________
>> >>>>>>>> Users mailing list
>> >>>>>>>> Users at ovirt.org
>> >>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>> >>>>>>>
>> >>>>>>>
>> >>>>>>>
>> >>>>>>> --
>> >>>>>>> Dafna Ron
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> --
>> >>>>> Dafna Ron
>> >>>
>> >>>
>> >>>
>> >>> --
>> >>> Dafna Ron
>> > _______________________________________________
>> > Users mailing list
>> > Users at ovirt.org
>> > http://lists.ovirt.org/mailman/listinfo/users
>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logs.tar.bz2
Type: application/x-bzip2
Size: 297351 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140114/526e6e4b/attachment-0001.bz2>
More information about the Users
mailing list